linux-toradex.git/kernel/time/clocksource.c, branch v5.19-rc3

clocksource: Replace cpumask_weight() with cpumask_empty()

2022-04-10T20:30:04+00:00

clocksource_verify_percpu() calls cpumask_weight() to check if any bit of a
given cpumask is set.

This can be done more efficiently with cpumask_empty() because
cpumask_empty() stops traversing the cpumask as soon as it finds first set
bit, while cpumask_weight() counts all bits unconditionally.

Signed-off-by: Yury Norov 
Signed-off-by: Thomas Gleixner 
Link: https://lore.kernel.org/r/20220210224933.379149-24-yury.norov@gmail.com

clocksource: Add a Kconfig option for WATCHDOG_MAX_SKEW

2022-02-02T01:35:43+00:00

A watchdog maximum skew of 100us may still be too small for
some systems or archs. It may also be too small when some kernel
debug config options are enabled.  So add a new Kconfig option
CLOCKSOURCE_WATCHDOG_MAX_SKEW_US to allow kernel builders to have more
control on the threshold for marking clocksource as unstable.

Signed-off-by: Waiman Long 
Signed-off-by: Paul E. McKenney

Merge tag 'bitmap-5.17-rc1' of git://github.com/norov/linux

2022-01-23T04:20:44+00:00

Pull bitmap updates from Yury Norov:

 - introduce for_each_set_bitrange()

 - use find_first_*_bit() instead of find_next_*_bit() where possible

 - unify for_each_bit() macros

* tag 'bitmap-5.17-rc1' of git://github.com/norov/linux:
  vsprintf: rework bitmap_list_string
  lib: bitmap: add performance test for bitmap_print_to_pagebuf
  bitmap: unify find_bit operations
  mm/percpu: micro-optimize pcpu_is_populated()
  Replace for_each_*_bit_from() with for_each_*_bit() where appropriate
  find: micro-optimize for_each_{set,clear}_bit()
  include/linux: move for_each_bit() macros from bitops.h to find.h
  cpumask: replace cpumask_next_* with cpumask_first_* where appropriate
  tools: sync tools/bitmap with mother linux
  all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate
  cpumask: use find_first_and_bit()
  lib: add find_first_and_bit()
  arch: remove GENERIC_FIND_FIRST_BIT entirely
  include: move find.h from asm_generic to linux
  bitops: move find_bit_*_le functions from le.h to find.h
  bitops: protect find_first_{,zero}_bit properly

cpumask: replace cpumask_next_* with cpumask_first_* where appropriate

2022-01-15T16:47:31+00:00

cpumask_first() is a more effective analogue of 'next' version if n == -1
(which means start == 0). This patch replaces 'next' with 'first' where
things look trivial.

There's no cpumask_first_zero() function, so create it.

Signed-off-by: Yury Norov 
Tested-by: Wolfram Sang

clocksource: Reduce the default clocksource_watchdog() retries to 2

2021-12-01T01:22:29+00:00

With the previous patch, there is an extra watchdog read in each retry.
Now the total number of clocksource reads is increased to 4 per iteration.
In order to avoid increasing the clock skew check overhead, the default
maximum number of retries is reduced from 3 to 2 to maintain the same 12
clocksource reads in the worst case.

Suggested-by: Paul E. McKenney 
Signed-off-by: Waiman Long 
Signed-off-by: Paul E. McKenney

clocksource: Avoid accidental unstable marking of clocksources

2021-12-01T01:22:29+00:00

Since commit db3a34e17433 ("clocksource: Retry clock read if long delays
detected") and commit 2e27e793e280 ("clocksource: Reduce clocksource-skew
threshold"), it is found that tsc clocksource fallback to hpet can
sometimes happen on both Intel and AMD systems especially when they are
running stressful benchmarking workloads. Of the 23 systems tested with
a v5.14 kernel, 10 of them have switched to hpet clock source during
the test run.

The result of falling back to hpet is a drastic reduction of performance
when running benchmarks. For example, the fio performance tests can
drop up to 70% whereas the iperf3 performance can drop up to 80%.

4 hpet fallbacks happened during bootup. They were:

[ 8.749399] clocksource: timekeeping watchdog on CPU13: hpet read-back delay of 263750ns, attempt 4, marking unstable
[ 12.044610] clocksource: timekeeping watchdog on CPU19: hpet read-back delay of 186166ns, attempt 4, marking unstable
[ 17.336941] clocksource: timekeeping watchdog on CPU28: hpet read-back delay of 182291ns, attempt 4, marking unstable
[ 17.518565] clocksource: timekeeping watchdog on CPU34: hpet read-back delay of 252196ns, attempt 4, marking unstable

Other fallbacks happen when the systems were running stressful
benchmarks. For example:

[ 2685.867873] clocksource: timekeeping watchdog on CPU117: hpet read-back delay of 57269ns, attempt 4, marking unstable
[46215.471228] clocksource: timekeeping watchdog on CPU8: hpet read-back delay of 61460ns, attempt 4, marking unstable

Commit 2e27e793e280 ("clocksource: Reduce clocksource-skew threshold"),
changed the skew margin from 100us to 50us. I think this is too small
and can easily be exceeded when running some stressful workloads on a
thermally stressed system. So it is switched back to 100us.

Even a maximum skew margin of 100us may be too small in for some systems
when booting up especially if those systems are under thermal stress. To
eliminate the case that the large skew is due to the system being too
busy slowing down the reading of both the watchdog and the clocksource,
an extra consecutive read of watchdog clock is being done to check this.

The consecutive watchdog read delay is compared against
WATCHDOG_MAX_SKEW/2. If the delay exceeds the limit, we assume that
the system is just too busy. A warning will be printed to the console
and the clock skew check is skipped for this round.

Fixes: db3a34e17433 ("clocksource: Retry clock read if long delays detected")
Fixes: 2e27e793e280 ("clocksource: Reduce clocksource-skew threshold")
Signed-off-by: Waiman Long
Signed-off-by: Paul E. McKenney

clocksource: Replace deprecated CPU-hotplug functions.

2021-08-10T12:53:58+00:00

The functions get_online_cpus() and put_online_cpus() have been
deprecated during the CPU hotplug rework. They map directly to
cpus_read_lock() and cpus_read_unlock().

Replace deprecated CPU-hotplug functions with the official version.
The behavior remains unchanged.

Signed-off-by: Sebastian Andrzej Siewior 
Signed-off-by: Thomas Gleixner 
Link: https://lore.kernel.org/r/20210803141621.780504-35-bigeasy@linutronix.de

clocksource: Print deviation in nanoseconds when a clocksource becomes unstable

2021-06-22T14:53:17+00:00

Currently when an unstable clocksource is detected, the raw counters of
that clocksource and watchdog will be printed, which can only be understood
after some math calculation.

So print the delta in nanoseconds as well to make it easier for humans to
check the results.

[ paulmck: Fix typo. ]

Signed-off-by: Feng Tang 
Signed-off-by: Paul E. McKenney 
Signed-off-by: Thomas Gleixner 
Link: https://lore.kernel.org/r/20210527190124.440372-6-paulmck@kernel.org

clocksource: Provide kernel module to test clocksource watchdog

2021-06-22T14:53:17+00:00

When the clocksource watchdog marks a clock as unstable, this might
be due to that clock being unstable or it might be due to delays that
happen to occur between the reads of the two clocks.  It would be good
to have a way of testing the clocksource watchdog's ability to
distinguish between these two causes of clock skew and instability.

Therefore, provide a new clocksource-wdtest module selected by a new
TEST_CLOCKSOURCE_WATCHDOG Kconfig option.  This module has a single module
parameter named "holdoff" that provides the number of seconds of delay
before testing should start, which defaults to zero when built as a module
and to 10 seconds when built directly into the kernel.  Very large systems
that boot slowly may need to increase the value of this module parameter.

This module uses hand-crafted clocksource structures to do its testing,
thus avoiding messing up timing for the rest of the kernel and for user
applications.  This module first verifies that the ->uncertainty_margin
field of the clocksource structures are set sanely.  It then tests the
delay-detection capability of the clocksource watchdog, increasing the
number of consecutive delays injected, first provoking console messages
complaining about the delays and finally forcing a clock-skew event.
Unexpected test results cause at least one WARN_ON_ONCE() console splat.
If there are no splats, the test has passed.  Finally, it fuzzes the
value returned from a clocksource to test the clocksource watchdog's
ability to detect time skew.

This module checks the state of its clocksource after each test, and
uses WARN_ON_ONCE() to emit a console splat if there are any failures.
This should enable all types of test frameworks to detect any such
failures.

This facility is intended for diagnostic use only, and should be avoided
on production systems.

Reported-by: Chris Mason 
Suggested-by: Thomas Gleixner 
Signed-off-by: Paul E. McKenney 
Signed-off-by: Thomas Gleixner 
Tested-by: Feng Tang 
Link: https://lore.kernel.org/r/20210527190124.440372-5-paulmck@kernel.org

clocksource: Reduce clocksource-skew threshold

2021-06-22T14:53:16+00:00

Currently, WATCHDOG_THRESHOLD is set to detect a 62.5-millisecond skew in
a 500-millisecond WATCHDOG_INTERVAL.  This requires that clocks be skewed
by more than 12.5% in order to be marked unstable.  Except that a clock
that is skewed by that much is probably destroying unsuspecting software
right and left.  And given that there are now checks for false-positive
skews due to delays between reading the two clocks, it should be possible
to greatly decrease WATCHDOG_THRESHOLD, at least for fine-grained clocks
such as TSC.

Therefore, add a new uncertainty_margin field to the clocksource structure
that contains the maximum uncertainty in nanoseconds for the corresponding
clock.  This field may be initialized manually, as it is for
clocksource_tsc_early and clocksource_jiffies, which is copied to
refined_jiffies.  If the field is not initialized manually, it will be
computed at clock-registry time as the period of the clock in question
based on the scale and freq parameters to __clocksource_update_freq_scale()
function.  If either of those two parameters are zero, the
tens-of-milliseconds WATCHDOG_THRESHOLD is used as a cowardly alternative
to dividing by zero.  No matter how the uncertainty_margin field is
calculated, it is bounded below by twice WATCHDOG_MAX_SKEW, that is, by 100
microseconds.

Note that manually initialized uncertainty_margin fields are not adjusted,
but there is a WARN_ON_ONCE() that triggers if any such field is less than
twice WATCHDOG_MAX_SKEW.  This WARN_ON_ONCE() is intended to discourage
production use of the one-nanosecond uncertainty_margin values that are
used to test the clock-skew code itself.

The actual clock-skew check uses the sum of the uncertainty_margin fields
of the two clocksource structures being compared.  Integer overflow is
avoided because the largest computed value of the uncertainty_margin
fields is one billion (10^9), and double that value fits into an
unsigned int.  However, if someone manually specifies (say) UINT_MAX,
they will get what they deserve.

Note that the refined_jiffies uncertainty_margin field is initialized to
TICK_NSEC, which means that skew checks involving this clocksource will
be sufficently forgiving.  In a similar vein, the clocksource_tsc_early
uncertainty_margin field is initialized to 32*NSEC_PER_MSEC, which
replicates the current behavior and allows custom setting if needed
in order to address the rare skews detected for this clocksource in
current mainline.

Suggested-by: Thomas Gleixner 
Signed-off-by: Paul E. McKenney 
Signed-off-by: Thomas Gleixner 
Acked-by: Feng Tang 
Link: https://lore.kernel.org/r/20210527190124.440372-4-paulmck@kernel.org