linux-toradex.git/kernel/time, branch v2.6.38.7

tick: Clear broadcast active bit when switching to oneshot

2011-05-21T22:13:29+00:00

commit 07f4beb0b5bbfaf36a64aa00d59e670ec578a95a upstream.

The first cpu which switches from periodic to oneshot mode switches
also the broadcast device into oneshot mode. The broadcast device
serves as a backup for per cpu timers which stop in deeper
C-states. To avoid starvation of the cpus which might be in idle and
depend on broadcast mode it marks the other cpus as broadcast active
and sets the brodcast expiry value of those cpus to the next tick.

The oneshot mode broadcast bit for the other cpus is sticky and gets
only cleared when those cpus exit idle. If a cpu was not idle while
the bit got set in consequence the bit prevents that the broadcast
device is armed on behalf of that cpu when it enters idle for the
first time after it switched to oneshot mode.

In most cases that goes unnoticed as one of the other cpus has usually
a timer pending which keeps the broadcast device armed with a short
timeout. Now if the only cpu which has a short timer active has the
bit set then the broadcast device will not be armed on behalf of that
cpu and will fire way after the expected timer expiry. In the case of
Christians bug report it took ~145 seconds which is about half of the
wrap around time of HPET (the limit for that device) due to the fact
that all other cpus had no timers armed which expired before the 145
seconds timeframe.

The solution is simply to clear the broadcast active bit
unconditionally when a cpu switches to oneshot mode after the first
cpu switched the broadcast device over. It's not idle at that point
otherwise it would not be executing that code.

[ I fundamentally hate that broadcast crap. Why the heck thought some
  folks that when going into deep idle it's a brilliant concept to
  switch off the last device which brings the cpu back from that
  state? ]

Thanks to Christian for providing all the valuable debug information!

Reported-and-tested-by: Christian Hoffmann 
Cc: John Stultz 
Link: http://lkml.kernel.org/r/%3Calpine.LFD.2.02.1105161105170.3078%40ionos%3E
Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

clocksource: Install completely before selecting

2011-05-21T22:13:29+00:00

commit e05b2efb82596905ebfe88e8612ee81dec9b6592 upstream.

Christian Hoffmann reported that the command line clocksource override
with acpi_pm timer fails:

 Kernel command line:  clocksource=acpi_pm
 hpet clockevent registered
 Switching to clocksource hpet
 Override clocksource acpi_pm is not HRT compatible.
 Cannot switch while in HRT/NOHZ mode.

The watchdog code is what enables CLOCK_SOURCE_VALID_FOR_HRES, but we
actually end up selecting the clocksource before we enqueue it into
the watchdog list, so that's why we see the warning and fail to switch
to acpi_pm timer as requested. That's particularly bad when we want to
debug timekeeping related problems in early boot.

Put the selection call last.

Reported-by: Christian Hoffmann 
Signed-off-by: John Stultz 
Link: http://lkml.kernel.org/r/%3C1304558210.2943.24.camel%40work-vm%3E
Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

clockevents: Prevent oneshot mode when broadcast device is periodic

2011-02-26T08:45:28+00:00

When the per cpu timer is marked CLOCK_EVT_FEAT_C3STOP, then we only
can switch into oneshot mode, when the backup broadcast device
supports oneshot mode as well. Otherwise we would try to switch the
broadcast device into an unsupported mode unconditionally. This went
unnoticed so far as the current available broadcast devices support
oneshot mode. Seth unearthed this problem while debugging and working
around an hpet related BIOS wreckage.

Add the necessary check to tick_is_oneshot_available().

Reported-and-tested-by: Seth Forshee 
Signed-off-by: Thomas Gleixner 
LKML-Reference: 
Cc: stable@kernel.org # .21 ->

timer debug: Hide kernel addresses via %pK in /proc/timer_list

2011-02-12T13:11:56+00:00

In the continuing effort to avoid kernel addresses leaking to
unprivileged users, this patch switches to %pK for
/proc/timer_list reporting.

Signed-off-by: Kees Cook 
Cc: John Stultz 
Cc: Dan Rosenberg 
Cc: Eugene Teo 
Cc: Linus Torvalds 
LKML-Reference: <20110212032125.GA23571@outflux.net>
Signed-off-by: Ingo Molnar

hrtimers: Notify hrtimer users of switches to NOHZ mode

2011-01-19T19:08:15+00:00

When NOHZ=y and high res timers are disabled (via cmdline or
Kconfig) tick_nohz_switch_to_nohz() will notify the user about
switching into NOHZ mode. Nothing is printed for the case where
HIGH_RES_TIMERS=y. Fix this for the HIGH_RES_TIMERS=y case by
duplicating the printk from the low res NOHZ path in the high
res NOHZ path.

This confused me since I was thinking 'dmesg | grep -i NOHZ' would
tell me if NOHZ was enabled, but if I have hrtimers there is
nothing.

Signed-off-by: Stephen Boyd 
Acked-by: Thomas Gleixner 
Cc: Peter Zijlstra 
LKML-Reference: <1295419594-13085-1-git-send-email-sboyd@codeaurora.org>
Signed-off-by: Ingo Molnar

Merge branches 'core-fixes-for-linus', 'x86-fixes-for-linus', 'timers-fixes-for-linus' and 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

2011-01-15T20:45:00+00:00

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  rcu: avoid pointless blocked-task warnings
  rcu: demote SRCU_SYNCHRONIZE_DELAY from kernel-parameter status
  rtmutex: Fix comment about why new_owner can be NULL in wake_futex_pi()

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, olpc: Add missing Kconfig dependencies
  x86, mrst: Set correct APB timer IRQ affinity for secondary cpu
  x86: tsc: Fix calibration refinement conditionals to avoid divide by zero
  x86, ia64, acpi: Clean up x86-ism in drivers/acpi/numa.c

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  timekeeping: Make local variables static
  time: Rename misnamed minsec argument of clocks_calc_mult_shift()

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  tracing: Remove syscall_exit_fields
  tracing: Only process module tracepoints once
  perf record: Add "nodelay" mode, disabled by default
  perf sched: Fix list of events, dropping unsupported ':r' modifier
  Revert "perf tools: Emit clearer message for sys_perf_event_open ENOENT return"
  perf top: Fix annotate segv
  perf evsel: Fix order of event list deletion

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

2011-01-13T18:05:56+00:00

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)
  Documentation/trace/events.txt: Remove obsolete sched_signal_send.
  writeback: fix global_dirty_limits comment runtime -> real-time
  ppc: fix comment typo singal -> signal
  drivers: fix comment typo diable -> disable.
  m68k: fix comment typo diable -> disable.
  wireless: comment typo fix diable -> disable.
  media: comment typo fix diable -> disable.
  remove doc for obsolete dynamic-printk kernel-parameter
  remove extraneous 'is' from Documentation/iostats.txt
  Fix spelling milisec -> ms in snd_ps3 module parameter description
  Fix spelling mistakes in comments
  Revert conflicting V4L changes
  i7core_edac: fix typos in comments
  mm/rmap.c: fix comment
  sound, ca0106: Fix assignment to 'channel'.
  hrtimer: fix a typo in comment
  init/Kconfig: fix typo
  anon_inodes: fix wrong function name in comment
  fix comment typos concerning "consistent"
  poll: fix a typo in comment
  ...

Fix up trivial conflicts in:
 - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c)
 - fs/ext4/ext4.h

Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.

pps: capture MONOTONIC_RAW timestamps as well

2011-01-13T16:03:21+00:00

MONOTONIC_RAW clock timestamps are ideally suited for frequency
calculation and also fit well into the original NTP hardpps design.  Now
phase and frequency can be adjusted separately: the former based on
REALTIME clock and the latter based on MONOTONIC_RAW clock.

A new function getnstime_raw_and_real is added to timekeeping subsystem to
capture both timestamps at the same time and atomically.

Signed-off-by: Alexander Gordeev 
Acked-by: John Stultz 
Cc: Rodolfo Giometti 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

ntp: add hardpps implementation

2011-01-13T16:03:20+00:00

This commit adds hardpps() implementation based upon the original one from
the NTPv4 reference kernel code from David Mills.  However, it is highly
optimized towards very fast syncronization and maximum stickness to PPS
signal.  The typical error is less then a microsecond.

To make it sync faster I had to throw away exponential phase filter so
that the full phase offset is corrected immediately.  Then I also had to
throw away median phase filter because it gives a bigger error itself if
used without exponential filter.

Maybe we will find an appropriate filtering scheme in the future but it's
not necessary if the signal quality is ok.

Signed-off-by: Alexander Gordeev 
Acked-by: John Stultz 
Cc: Rodolfo Giometti 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

timekeeping: Make local variables static

2011-01-12T11:23:13+00:00

Signed-off-by: H Hartley Sweeten 
Cc: John Stultz 
LKML-Reference: <0D753D10438DA54287A00B027084269764CE0E54B7@AUSP01VMBX24.collaborationhost.net>
Signed-off-by: Thomas Gleixner