linux-toradex.git/kernel/time, branch v3.18.13

timers/tick/broadcast-hrtimer: Fix suspicious RCU usage in idle loop

2015-04-24T21:14:12+00:00

[ Upstream commit a127d2bcf1fbc8c8e0b5cf0dab54f7d3ff50ce47 ]

The hrtimer mode of broadcast queues hrtimers in the idle entry
path so as to wakeup cpus in deep idle states. The associated
call graph is :

	cpuidle_idle_call()
	|____ clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, ....))
	     |_____tick_broadcast_set_event()
		   |____clockevents_program_event()
			|____bc_set_next()

The hrtimer_{start/cancel} functions call into tracing which uses RCU.
But it is not legal to call into RCU in cpuidle because it is one of the
quiescent states. Hence protect this region with RCU_NONIDLE which informs
RCU that the cpu is momentarily non-idle.

As an aside it is helpful to point out that the clock event device that is
programmed here is not a per-cpu clock device; it is a
pseudo clock device, used by the broadcast framework alone.
The per-cpu clock device programming never goes through bc_set_next().

Signed-off-by: Preeti U Murthy 
Signed-off-by: Peter Zijlstra (Intel) 
Reviewed-by: Paul E. McKenney 
Cc: linuxppc-dev@ozlabs.org
Cc: mpe@ellerman.id.au
Cc: tglx@linutronix.de
Link: http://lkml.kernel.org/r/20150318104705.17763.56668.stgit@preeti.in.ibm.com
Signed-off-by: Ingo Molnar 
Signed-off-by: Sasha Levin

ntp: Fixup adjtimex freq validation on 32-bit systems

2015-03-06T22:53:01+00:00

commit 29183a70b0b828500816bd794b3fe192fce89f73 upstream.

Additional validation of adjtimex freq values to avoid
potential multiplication overflows were added in commit
5e5aeb4367b (time: adjtimex: Validate the ADJ_FREQUENCY values)

Unfortunately the patch used LONG_MAX/MIN instead of
LLONG_MAX/MIN, which was fine on 64-bit systems, but being
much smaller on 32-bit systems caused false positives
resulting in most direct frequency adjustments to fail w/
EINVAL.

ntpd only does direct frequency adjustments at startup, so
the issue was not as easily observed there, but other time
sync applications like ptpd and chrony were more effected by
the bug.

See bugs:

  https://bugzilla.kernel.org/show_bug.cgi?id=92481
  https://bugzilla.redhat.com/show_bug.cgi?id=1188074

This patch changes the checks to use LLONG_MAX for
clarity, and additionally the checks are disabled
on 32-bit systems since LLONG_MAX/PPM_SCALE is always
larger then the 32-bit long freq value, so multiplication
overflows aren't possible there.

Reported-by: Josh Boyer 
Reported-by: George Joseph 
Tested-by: George Joseph 
Signed-off-by: John Stultz 
Signed-off-by: Peter Zijlstra (Intel) 
Cc: Linus Torvalds 
Cc: Sasha Levin 
Link: http://lkml.kernel.org/r/1423553436-29747-1-git-send-email-john.stultz@linaro.org
[ Prettified the changelog and the comments a bit. ]
Signed-off-by: Ingo Molnar 
Signed-off-by: Greg Kroah-Hartman

hrtimer: Fix incorrect tai offset calculation for non high-res timer systems

2015-02-11T07:00:56+00:00

commit 2d926c15d629a13914ce3e5f26354f6a0ac99e70 upstream.

I noticed some CLOCK_TAI timer test failures on one of my
less-frequently used configurations. And after digging in I
found in 76f4108892d9 (Cleanup hrtimer accessors to the
timekepeing state), the hrtimer_get_softirq_time tai offset
calucation was incorrectly rewritten, as the tai offset we
return shold be from CLOCK_MONOTONIC, and not CLOCK_REALTIME.

This results in CLOCK_TAI timers expiring early on non-highres
capable machines.

This patch fixes the issue, calculating the tai time properly
from the monotonic base.

Signed-off-by: John Stultz 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/1423097126-10236-1-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar 
Signed-off-by: Greg Kroah-Hartman

time: adjtimex: Validate the ADJ_FREQUENCY values

2015-01-30T01:40:44+00:00

commit 5e5aeb4367b450a28f447f6d5ab57d8f2ab16a5f upstream.

Verify that the frequency value from userspace is valid and makes sense.

Unverified values can cause overflows later on.

Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Signed-off-by: Sasha Levin 
[jstultz: Fix up bug for negative values and drop redunent cap check]
Signed-off-by: John Stultz 
Signed-off-by: Greg Kroah-Hartman

time: settimeofday: Validate the values of tv from user

2015-01-30T01:40:44+00:00

commit 6ada1fc0e1c4775de0e043e1bd3ae9d065491aa5 upstream.

An unvalidated user input is multiplied by a constant, which can result in
an undefined behaviour for large values. While this is validated later,
we should avoid triggering undefined behaviour.

Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Signed-off-by: Sasha Levin 
[jstultz: include trivial milisecond->microsecond correction noticed
by Andy]
Signed-off-by: John Stultz 
Signed-off-by: Greg Kroah-Hartman

tick/powerclamp: Remove tick_nohz_idle abuse

2015-01-27T16:29:37+00:00

commit a5fd9733a30d18d7ac23f17080e7e07bb3205b69 upstream.

commit 4dbd27711cd9 "tick: export nohz tick idle symbols for module
use" was merged via the thermal tree without an explicit ack from the
relevant maintainers.

The exports are abused by the intel powerclamp driver which implements
a fake idle state from a sched FIFO task. This causes all kinds of
wreckage in the NOHZ core code which rightfully assumes that
tick_nohz_idle_enter/exit() are only called from the idle task itself.

Recent changes in the NOHZ core lead to a failure of the powerclamp
driver and now people try to hack completely broken and backwards
workarounds into the NOHZ core code. This is completely unacceptable
and just papers over the real problem. There are way more subtle
issues lurking around the corner.

The real solution is to fix the powerclamp driver by rewriting it with
a sane concept, but that's beyond the scope of this.

So the only solution for now is to remove the calls into the core NOHZ
code from the powerclamp trainwreck along with the exports.

Fixes: d6d71ee4a14a "PM: Introduce Intel PowerClamp Driver"
Signed-off-by: Thomas Gleixner 
Cc: Preeti U Murthy 
Cc: Viresh Kumar 
Cc: Frederic Weisbecker 
Cc: Fengguang Wu 
Cc: Frederic Weisbecker 
Cc: Pan Jacob jun 
Cc: LKP 
Cc: Peter Zijlstra 
Cc: Zhang Rui 
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1412181110110.17382@nanos
Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

sched/cputime: Fix cpu_timer_sample_group() double accounting

2014-11-16T09:04:18+00:00

While looking over the cpu-timer code I found that we appear to add
the delta for the calling task twice, through:

  cpu_timer_sample_group()
    thread_group_cputimer()
      thread_group_cputime()
        times->sum_exec_runtime += task_sched_runtime();

    *sample = cputime.sum_exec_runtime + task_delta_exec();

Which would make the sample run ahead, making the sleep short.

Signed-off-by: Peter Zijlstra (Intel) 
Cc: KOSAKI Motohiro 
Cc: Oleg Nesterov 
Cc: Stanislaw Gruszka 
Cc: Christoph Lameter 
Cc: Frederic Weisbecker 
Cc: Linus Torvalds 
Cc: Rik van Riel 
Cc: Tejun Heo 
Link: http://lkml.kernel.org/r/20141112113737.GI10476@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar

clockevents: Prevent shift out of bounds

2014-10-25T08:43:15+00:00

Andrey reported that on a kernel with UBSan enabled he found:

     UBSan: Undefined behaviour in ../kernel/time/clockevents.c:75:34

     I guess it should be 1ULL here instead of 1U:
            (!ismax || evt->mult <= (1U << evt->shift)))

That's indeed the correct solution because shift might be 32.

Reported-by: Andrey Ryabinin 
Cc: Peter Zijlstra 
Signed-off-by: Thomas Gleixner

posix-timers: Fix stack info leak in timer_create()

2014-10-25T08:43:15+00:00

If userland creates a timer without specifying a sigevent info, we'll
create one ourself, using a stack local variable. Particularly will we
use the timer ID as sival_int. But as sigev_value is a union containing
a pointer and an int, that assignment will only partially initialize
sigev_value on systems where the size of a pointer is bigger than the
size of an int. On such systems we'll copy the uninitialized stack bytes
from the timer_create() call to userland when the timer actually fires
and we're going to deliver the signal.

Initialize sigev_value with 0 to plug the stack info leak.

Found in the PaX patch, written by the PaX Team.

Fixes: 5a9fa7307285 ("posix-timers: kill ->it_sigev_signo and...")
Signed-off-by: Mathias Krause 
Cc: Oleg Nesterov 
Cc: Brad Spengler 
Cc: PaX Team 
Cc: 	# v2.6.28+
Link: http://lkml.kernel.org/r/1412456799-32339-1-git-send-email-minipli@googlemail.com
Signed-off-by: Thomas Gleixner

Merge branch 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu

2014-10-15T05:48:18+00:00

Pull percpu consistent-ops changes from Tejun Heo:
"Way back, before the current percpu allocator was implemented, static
and dynamic percpu memory areas were allocated and handled separately
and had their own accessors. The distinction has been gone for many
years now; however, the now duplicate two sets of accessors remained
with the pointer based ones - this_cpu_*() - evolving various other
operations over time. During the process, we also accumulated other
inconsistent operations.

This pull request contains Christoph's patches to clean up the
duplicate accessor situation. __get_cpu_var() uses are replaced with
with this_cpu_ptr() and __this_cpu_ptr() with raw_cpu_ptr().

Unfortunately, the former sometimes is tricky thanks to C being a bit
messy with the distinction between lvalues and pointers, which led to
a rather ugly solution for cpumask_var_t involving the introduction of
this_cpu_cpumask_var_ptr().

This converts most of the uses but not all. Christoph will follow up
with the remaining conversions in this merge window and hopefully
remove the obsolete accessors"

* 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (38 commits)
irqchip: Properly fetch the per cpu offset
percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t -fix
ia64: sn_nodepda cannot be assigned to after this_cpu conversion. Use __this_cpu_write.
percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t
Revert "powerpc: Replace __get_cpu_var uses"
percpu: Remove __this_cpu_ptr
clocksource: Replace __this_cpu_ptr with raw_cpu_ptr
sparc: Replace __get_cpu_var uses
avr32: Replace __get_cpu_var with __this_cpu_write
blackfin: Replace __get_cpu_var uses
tile: Use this_cpu_ptr() for hardware counters
tile: Replace __get_cpu_var uses
powerpc: Replace __get_cpu_var uses
alpha: Replace __get_cpu_var
ia64: Replace __get_cpu_var uses
s390: cio driver &__get_cpu_var replacements
s390: Replace __get_cpu_var uses
mips: Replace __get_cpu_var uses
MIPS: Replace __get_cpu_var uses in FPU emulator.
arm: Replace __this_cpu_ptr with raw_cpu_ptr
...