linux-toradex.git/kernel/time, branch v3.2.73

clocksource: Fix abs() usage w/ 64bit values

2015-11-17T15:54:41+00:00

commit 67dfae0cd72fec5cd158b6e5fb1647b7dbe0834c upstream.

This patch fixes one cases where abs() was being used with 64-bit
nanosecond values, where the result may be capped at 32-bits.

This potentially could cause watchdog false negatives on 32-bit
systems, so this patch addresses the issue by using abs64().

Signed-off-by: John Stultz 
Cc: Prarit Bhargava 
Cc: Richard Cochran 
Cc: Ingo Molnar 
Link: http://lkml.kernel.org/r/1442279124-7309-2-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

ntp: Fixup adjtimex freq validation on 32-bit systems

2015-03-06T00:39:20+00:00

commit 29183a70b0b828500816bd794b3fe192fce89f73 upstream.

Additional validation of adjtimex freq values to avoid
potential multiplication overflows were added in commit
5e5aeb4367b (time: adjtimex: Validate the ADJ_FREQUENCY values)

Unfortunately the patch used LONG_MAX/MIN instead of
LLONG_MAX/MIN, which was fine on 64-bit systems, but being
much smaller on 32-bit systems caused false positives
resulting in most direct frequency adjustments to fail w/
EINVAL.

ntpd only does direct frequency adjustments at startup, so
the issue was not as easily observed there, but other time
sync applications like ptpd and chrony were more effected by
the bug.

See bugs:

  https://bugzilla.kernel.org/show_bug.cgi?id=92481
  https://bugzilla.redhat.com/show_bug.cgi?id=1188074

This patch changes the checks to use LLONG_MAX for
clarity, and additionally the checks are disabled
on 32-bit systems since LLONG_MAX/PPM_SCALE is always
larger then the 32-bit long freq value, so multiplication
overflows aren't possible there.

Reported-by: Josh Boyer 
Reported-by: George Joseph 
Tested-by: George Joseph 
Signed-off-by: John Stultz 
Signed-off-by: Peter Zijlstra (Intel) 
Cc: Linus Torvalds 
Cc: Sasha Levin 
Link: http://lkml.kernel.org/r/1423553436-29747-1-git-send-email-john.stultz@linaro.org
[ Prettified the changelog and the comments a bit. ]
Signed-off-by: Ingo Molnar 
Signed-off-by: Ben Hutchings

time: adjtimex: Validate the ADJ_FREQUENCY values

2015-03-06T00:39:19+00:00

commit 5e5aeb4367b450a28f447f6d5ab57d8f2ab16a5f upstream.

Verify that the frequency value from userspace is valid and makes sense.

Unverified values can cause overflows later on.

Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Signed-off-by: Sasha Levin 
[jstultz: Fix up bug for negative values and drop redunent cap check]
Signed-off-by: John Stultz 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

alarmtimer: Lock k_itimer during timer callback

2014-11-05T20:27:43+00:00

commit 474e941bed9262f5fa2394f9a4a67e24499e5926 upstream.

Locks the k_itimer's it_lock member when handling the alarm timer's
expiry callback.

The regular posix timers defined in posix-timers.c have this lock held
during timout processing because their callbacks are routed through
posix_timer_fn().  The alarm timers follow a different path, so they
ought to grab the lock somewhere else.

Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Cc: Richard Cochran 
Cc: Prarit Bhargava 
Cc: Sharvil Nanavati 
Signed-off-by: Richard Larocque 
Signed-off-by: John Stultz 
Signed-off-by: Ben Hutchings

alarmtimer: Do not signal SIGEV_NONE timers

2014-11-05T20:27:43+00:00

commit 265b81d23a46c39df0a735a3af4238954b41a4c2 upstream.

Avoids sending a signal to alarm timers created with sigev_notify set to
SIGEV_NONE by checking for that special case in the timeout callback.

The regular posix timers avoid sending signals to SIGEV_NONE timers by
not scheduling any callbacks for them in the first place.  Although it
would be possible to do something similar for alarm timers, it's simpler
to handle this as a special case in the timeout.

Prior to this patch, the alarm timer would ignore the sigev_notify value
and try to deliver signals to the process anyway.  Even worse, the
sanity check for the value of sigev_signo is skipped when SIGEV_NONE was
specified, so the signal number could be bogus.  If sigev_signo was an
unitialized value (as it often would be if SIGEV_NONE is used), then
it's hard to predict which signal will be sent.

Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Cc: Richard Cochran 
Cc: Prarit Bhargava 
Cc: Sharvil Nanavati 
Signed-off-by: Richard Larocque 
Signed-off-by: John Stultz 
Signed-off-by: Ben Hutchings

alarmtimer: Return relative times in timer_gettime

2014-11-05T20:27:43+00:00

commit e86fea764991e00a03ff1e56409ec9cacdbda4c9 upstream.

Returns the time remaining for an alarm timer, rather than the time at
which it is scheduled to expire.  If the timer has already expired or it
is not currently scheduled, the it_value's members are set to zero.

This new behavior matches that of the other posix-timers and the POSIX
specifications.

This is a change in user-visible behavior, and may break existing
applications.  Hopefully, few users rely on the old incorrect behavior.

Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Cc: Richard Cochran 
Cc: Prarit Bhargava 
Cc: Sharvil Nanavati 
Signed-off-by: Richard Larocque 
[jstultz: minor style tweak]
Signed-off-by: John Stultz 
[bwh: Backported to 3.2: Add definition of alarm_expires_remaining() from
 commit 6cffe00f7d4e ('alarmtimer: Add functions for timerfd support')]
Signed-off-by: Ben Hutchings

nohz: Fix another inconsistency between CONFIG_NO_HZ=n and nohz=off

2014-08-06T17:07:39+00:00

commit 0e576acbc1d9600cf2d9b4a141a2554639959d50 upstream.

If CONFIG_NO_HZ=n tick_nohz_get_sleep_length() returns NSEC_PER_SEC/HZ.

If CONFIG_NO_HZ=y and the nohz functionality is disabled via the
command line option "nohz=off" or not enabled due to missing hardware
support, then tick_nohz_get_sleep_length() returns 0. That happens
because ts->sleep_length is never set in that case.

Set it to NSEC_PER_SEC/HZ when the NOHZ mode is inactive.

Reported-by: Michal Hocko 
Reported-by: Borislav Petkov 
Signed-off-by: Thomas Gleixner 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

alarmtimer: Fix bug where relative alarm timers were treated as absolute

2014-08-06T17:07:37+00:00

commit 16927776ae757d0d132bdbfabbfe2c498342bd59 upstream.

Sharvil noticed with the posix timer_settime interface, using the
CLOCK_REALTIME_ALARM or CLOCK_BOOTTIME_ALARM clockid, if the users
tried to specify a relative time timer, it would incorrectly be
treated as absolute regardless of the state of the flags argument.

This patch corrects this, properly checking the absolute/relative flag,
as well as adds further error checking that no invalid flag bits are set.

Reported-by: Sharvil Nanavati 
Signed-off-by: John Stultz 
Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Cc: Prarit Bhargava 
Cc: Sharvil Nanavati 
Link: http://lkml.kernel.org/r/1404767171-6902-1-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner 
Signed-off-by: Ben Hutchings

timekeeping: fix 32-bit overflow in get_monotonic_boottime

2014-04-01T23:59:00+00:00

fixed upstream in v3.6 by ec145babe754f9ea1079034a108104b6001e001c

get_monotonic_boottime adds three nanonsecond values stored
in longs, followed by an s64.  If the long values are all
close to 1e9 the first three additions can overflow and
become negative when added to the s64.  Cast the first
value to s64 so that all additions are 64 bit.

Signed-off-by: Colin Cross 
[jstultz: Fished this out of the AOSP commong.git tree. This was
fixed upstream in v3.6 by ec145babe754f9ea1079034a108104b6001e001c]
Signed-off-by: John Stultz 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

time: Fix overflow when HZ is smaller than 60

2014-04-01T23:58:49+00:00

commit 80d767d770fd9c697e434fd080c2db7b5c60c6dd upstream.

When compiling for the IA-64 ski emulator, HZ is set to 32 because the
emulation is slow and we don't want to waste too many cycles processing
timers. Alpha also has an option to set HZ to 32.

This causes integer underflow in
kernel/time/jiffies.c:
kernel/time/jiffies.c:66:2: warning: large integer implicitly truncated to unsigned type [-Woverflow]
  .mult  = NSEC_PER_JIFFY << JIFFIES_SHIFT, /* details above */
  ^

This patch reduces the JIFFIES_SHIFT value to avoid the overflow.

Signed-off-by: Mikulas Patocka 
Link: http://lkml.kernel.org/r/alpine.LRH.2.02.1401241639100.23871@file01.intranet.prod.int.rdu2.redhat.com
Signed-off-by: Thomas Gleixner 
Signed-off-by: Ben Hutchings