linux-toradex.git/kernel/trace/blktrace.c, branch v2.6.39-rc7

block: make unplug timer trace event correspond to the schedule() unplug

2011-04-16T11:51:05+00:00

It's a pretty close match to what we had before - the timer triggering
would mean that nobody unplugged the plug in due time, in the new
scheme this matches very closely what the schedule() unplug now is.
It's essentially the difference between an explicit unplug (IO unplug)
or an implicit unplug (timer unplug, we scheduled with pending IO
queued).

Signed-off-by: Jens Axboe

block: fixup block IO unplug trace call

2011-04-12T08:12:19+00:00

It was removed with the on-stack plugging, readd it and track the
depth of requests added when flushing the plug.

Signed-off-by: Jens Axboe

block: remove block_unplug_timer() trace point

2011-04-12T08:06:33+00:00

We no longer have an unplug timer running, so no point in keeping
the trace point.

Signed-off-by: Jens Axboe

blktrace: Use rq->cmd_flags directly in blk_add_trace_rq.

2011-03-11T19:11:59+00:00

In blk_add_trace_rq, we only chose the minor 2 bits from
request's cmd_flags and did some check for discard.
so most of other flags(e.g, REQ_SYNC) are missing.

For example, with a sync write after blkparse we get:
  8,16   1        1     0.001776503  7509  A  WS 1349632 + 1024 <- (8,17) 1347584
  8,16   1        2     0.001776813  7509  Q  WS 1349632 + 1024 [dd]
  8,16   1        3     0.001780395  7509  G  WS 1349632 + 1024 [dd]
  8,16   1        5     0.001783186  7509  I   W 1349632 + 1024 [dd]
  8,16   1       11     0.001816987  7509  D   W 1349632 + 1024 [dd]
  8,16   0        2     0.006218192     0  C   W 1349632 + 1024 [0]

Since now we have integrated the flags of both bio and request,
it is safe to pass rq->cmd_flags directly to __blk_add_trace.

With this patch, after a sync write we get:
  8,16   1        1     0.001776900  5425  A  WS 1189888 + 1024 <- (8,17) 1187840
  8,16   1        2     0.001777179  5425  Q  WS 1189888 + 1024 [dd]
  8,16   1        3     0.001780797  5425  G  WS 1189888 + 1024 [dd]
  8,16   1        5     0.001783402  5425  I  WS 1189888 + 1024 [dd]
  8,16   1       11     0.001817468  5425  D  WS 1189888 + 1024 [dd]
  8,16   0        2     0.005640709     0  C  WS 1189888 + 1024 [0]

Signed-off-by: Tao Ma 
Acked-by: Jeff Moyer 
Signed-off-by: Jens Axboe

blktrace: Remove blk_fill_rwbs_rq.

2011-03-03T15:53:20+00:00

If we enable trace events to trace block actions, We use
blk_fill_rwbs_rq to analyze the corresponding actions
in request's cmd_flags, but we only choose the minor 2 bits
from it, so most of other flags(e.g, REQ_SYNC) are missing.
For example, with a sync write we get:
write_test-2409  [001]   160.013869: block_rq_insert: 3,64 W 0 () 258135 + =
8 [write_test]

Since now we have integrated the flags of both bio and request,
it is safe to pass rq->cmd_flags directly to blk_fill_rwbs and
blk_fill_rwbs_rq isn't needed any more.

With this patch, after a sync write we get:
write_test-2417  [000]   226.603878: block_rq_insert: 3,64 WS 0 () 258135 +=
 8 [write_test]

Signed-off-by: Tao Ma 
Acked-by: Jeff Moyer 
Signed-off-by: Jens Axboe

blktrace: Don't output messages if NOTIFY isn't set.

2011-01-19T15:25:02+00:00

Now if we enable blktrace, cfq has too many messages output to the
trace buffer. It is fine if we don't specify any action mask.
But if I do like this:
blktrace /dev/sdb -a issue -a complete -o - | blkparse -i -
I only want to see 'D' and 'C', while with the following command
dd if=/mnt/ocfs2/test of=/dev/null bs=4k count=1 iflag=direct

I will get(with a 2.6.37 vanilla kernel):
  8,16   0        0     0.000000000     0  m   N cfq3805 alloced
  8,16   0        0     0.000004126     0  m   N cfq3805 insert_request
  8,16   0        0     0.000004884     0  m   N cfq3805 add_to_rr
  8,16   0        0     0.000008417     0  m   N cfq workload slice:300
  8,16   0        0     0.000009557     0  m   N cfq3805 set_active wl_prio:0 wl_type:2
  8,16   0        0     0.000010640     0  m   N cfq3805 fifo=          (null)
  8,16   0        0     0.000011193     0  m   N cfq3805 dispatch_insert
  8,16   0        0     0.000012221     0  m   N cfq3805 dispatched a request
  8,16   0        0     0.000012802     0  m   N cfq3805 activate rq, drv=1
  8,16   0        1     0.000013181  3805  D   R 114759 + 8 [dd]
  8,16   0        2     0.000164244     0  C   R 114759 + 8 [0]
  8,16   0        0     0.000167997     0  m   N cfq3805 complete rqnoidle 0
  8,16   0        0     0.000168782     0  m   N cfq3805 set_slice=100
  8,16   0        0     0.000169874     0  m   N cfq3805 arm_idle: 8 group_idle: 0
  8,16   0        0     0.000170189     0  m   N cfq schedule dispatch
  8,16   0        0     0.000397938     0  m   N cfq3805 slice expired t=0
  8,16   0        0     0.000399763     0  m   N cfq3805 sl_used=1 disp=1 charge=1 iops=0 sect=8
  8,16   0        0     0.000400227     0  m   N cfq3805 del_from_rr
  8,16   0        0     0.000400882     0  m   N cfq3805 put_queue

See, there are 19 lines while I only need 2. I don't think it is
appropriate for a user.

So this patch will disable any messages if the BLK_TC_NOTIFY isn't set.
Now the output for the same command will look like:
  8,16   0        1     0.000000000  4908  D   R 114759 + 8 [dd]
  8,16   0        2     0.000146827     0  C   R 114759 + 8 [0]

Yes, it is what I want to see.

Cc: Steven Rostedt 
Cc: Jeff Moyer 
Signed-off-by: Tao Ma 
Signed-off-by: Jens Axboe

block: ensure that completion error gets properly traced

2011-01-10T08:06:44+00:00

We normally just use the BIO_UPTODATE flag to signal 0/-EIO. If
we have more information available, we should pass that along to
the trace output.

Signed-off-by: Jens Axboe

blktrace: add missing probe argument to block_bio_complete

2011-01-07T07:53:58+00:00

blktrace.c block bio complete callback needs to gain a new argument to reflect
the newly added "error" tracepoint argument. This is needed to match the new
block_bio_complete TRACE_EVENT as of
commit de983a7bfcb7c020901ca6e2314cf55a4207ab5a.

Signed-off-by: Mathieu Desnoyers 
CC: Jeff Moyer 
CC: Steven Rostedt 
CC: Frederic Weisbecker 
CC: Ingo Molnar 
CC: Thomas Gleixner 
CC: Li Zefan 
Signed-off-by: Jens Axboe

block: Rename "block_remap" tracepoint to "block_bio_remap" to clarify the event.

2010-11-16T11:53:39+00:00

Signed-off-by: Kiyoshi Ueda 
Signed-off-by: Jun'ichi Nomura 
Signed-off-by: Mike Snitzer 
Signed-off-by: Jens Axboe

block: remove REQ_HARDBARRIER

2010-11-10T13:54:09+00:00

REQ_HARDBARRIER is dead now, so remove the leftovers.  What's left
at this point is:

 - various checks inside the block layer.
 - sanity checks in bio based drivers.
 - now unused bio_empty_barrier helper.
 - Xen blockfront use of BLKIF_OP_WRITE_BARRIER - it's dead for a while,
   but Xen really needs to sort out it's barrier situaton.
 - setting of ordered tags in uas - dead code copied from old scsi
   drivers.
 - scsi different retry for barriers - it's dead and should have been
   removed when flushes were converted to FS requests.
 - blktrace handling of barriers - removed.  Someone who knows blktrace
   better should add support for REQ_FLUSH and REQ_FUA, though.

Signed-off-by: Christoph Hellwig 
Signed-off-by: Jens Axboe