Impact: clean up and fix for dyn ftrace filter selection

The previous logic of the dynamic ftrace selection of enabling
or disabling functions was complex and incorrect. This patch simplifies
the code and corrects the usage. This simplification also makes the
code more robust.

Here is the correct logic:

  Given a function that can be traced by dynamic ftrace:

  If the function is not to be traced, disable it if it was enabled.
  (this is if the function is in the set_ftrace_notrace file)

  (filter is on if there exists any functions in set_ftrace_filter file)

  If the filter is on, and we are enabling functions:
    If the function is in set_ftrace_filter, enable it if it is not
      already enabled.
    If the function is not in set_ftrace_filter, disable it if it is not
      already disabled.

  Otherwise, if the filter is off and we are enabling function tracing:
    Enable the function if it is not already enabled.

  Otherwise, if we are disabling function tracing:
    Disable the function if it is not already disabled.

This code now sets or clears the ENABLED flag in the record, and at the
end it will enable the function if the flag is set, or disable the function
if the flag is cleared.

The parameters for the function that does the above logic is also
simplified. Instead of passing in confusing "new" and "old" where
they might be swapped if the "enabled" flag is not set. The old logic
even had one of the above always NULL and had to be filled in. The new
logic simply passes in one parameter called "nop". A "call" is calculated
in the code, and at the end of the logic, when we know we need to either
disable or enable the function, we can then use the "nop" and "call"
properly.

This code is more robust than the previous version.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Impact: fix filter selection to apply when set

It can be confusing when the set_filter_functions is set (or cleared)
and the functions being recorded by the dynamic tracer does not
match.

This patch causes the code to be updated if the function tracer is
enabled and the filter is changed.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Impact: fix of output of set_ftrace_filter

The commit "ftrace: do not show freed records in
             available_filter_functions"

Removed a bit too much from the set_ftrace_filter code, where we now see
all functions in the set_ftrace_filter file even when we set a filter.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Impact: make output of available_filter_functions complete

phenomenon:

The first value of dyn_ftrace_total_info is not equal with
`cat available_filter_functions | wc -l`, but they should be equal.

root cause:

When printing functions with seq_printf in t_show, if the read buffer
is just overflowed by current function record, then this function
won't be printed to user space through read buffer, it will
just be dropped. So we can't see this function printing.

So, every time the last function to fill the read buffer, if overflowed,
will be dropped.

This also applies to set_ftrace_filter if set_ftrace_filter has
more bytes than read buffer.

fix:

Through checking return value of seq_printf, if less than 0, we know
this function doesn't be printed. Then we decrease position to force
this function to be printed next time, in next read buffer.

Another little fix is to show correct allocating pages count.

Signed-off-by: walimis <walimisdev@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Impact: enable/disable ring buffer recording API added

Several kernel developers have requested that there be a way to stop
recording into the ring buffers with a simple switch that can also
be enabled from userspace. This patch addes a new kernel API to the
ring buffers called:

 tracing_on()
 tracing_off()

When tracing_off() is called, all ring buffers will not be able to record
into their buffers.

tracing_on() will enable the ring buffers again.

These two act like an on/off switch. That is, there is no counting of the
number of times tracing_off or tracing_on has been called.

A new file is added to the debugfs/tracing directory called

  tracing_on

This allows for userspace applications to also flip the switch.

  echo 0 > debugfs/tracing/tracing_on

disables the tracing.

  echo 1 > /debugfs/tracing/tracing_on

enables it.

Note, this does not disable or enable any tracers. It only sets or clears
a flag that needs to be set in order for the ring buffers to write to
their buffers. It is a global flag, and affects all ring buffers.

The buffers start out with tracing_on enabled.

There are now three flags that control recording into the buffers:

 tracing_on: which affects all ring buffer tracers.

 buffer->record_disabled: which affects an allocated buffer, which may be set
     if an anomaly is detected, and tracing is disabled.

 cpu_buffer->record_disabled: which is set by tracing_stop() or if an
     anomaly is detected. tracing_start can not reenable this if
     an anomaly occurred.

The userspace debugfs/tracing/tracing_enabled is implemented with
tracing_stop() but the user space code can not enable it if the kernel
called tracing_stop().

Userspace can enable the tracing_on even if the kernel disabled it.
It is just a switch used to stop tracing if a condition was hit.
tracing_on is not for protecting critical areas in the kernel nor is
it for stopping tracing if an anomaly occurred. This is because userspace
can reenable it at any time.

Side effect: With this patch, I discovered a dead variable in ftrace.c
  called tracing_on. This patch removes it.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>

Impact: corrects a bug which made the non-dyn function tracer not functional

With latest git, the non-dynamic function tracer didn't get any trace.

The problem was the fact that ftrace_enabled wasn't initialized to 1
because ftrace hasn't any init function when DYNAMIC_FTRACE is disabled.

So when a tracer tries to register an ftrace_ops struct,
__register_ftrace_function failed to set the hook.

This patch corrects it by setting an init function to initialize
ftrace during the boot.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

this warning:

  kernel/trace/ftrace.c:189: warning: ‘frozen_record_count’ defined but not used

triggers because frozen_record_count is only used in the KCONFIG_MARKERS
case. Move the variable it there.

Alas, this frozen-record facility seems to have little use. The
frozen_record_count variable is not used by anything, nor the flags.

So this section might need a bit of dead-code-removal care as well.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

fix:

 kernel/trace/ftrace.c: In function 'ftrace_release':
 kernel/trace/ftrace.c:271: error: implicit declaration of function 'ftrace_release_hash'

release_hash is not needed without dftraced.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

The ftrace hash was used by the ftrace_daemon code. The record ip function
would place the calling address (ip) into the hash. The daemon would later
read the hash and modify that code.

The hash complicates the code. This patch removes it.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>