Add the const qualifier to all the ctl_tables in the tree except for
watchdog_hardlockup_sysctl, memory_allocation_profiling_sysctls,
loadpin_sysctl_table and the ones calling register_net_sysctl (./net,
drivers/inifiniband dirs). These are special cases as they use a
registration function with a non-const qualified ctl_table argument or
modify the arrays before passing them on to the registration function.

Constifying ctl_table structs will prevent the modification of
proc_handler function pointers as the arrays would reside in .rodata.
This is made possible after commit 78eb4ea25cd5 ("sysctl: treewide:
constify the ctl_table argument of proc_handlers") constified all the
proc_handlers.

Created this by running an spatch followed by a sed command:
Spatch:
    virtual patch

    @
    depends on !(file in "net")
    disable optional_qualifier
    @

    identifier table_name != {
      watchdog_hardlockup_sysctl,
      iwcm_ctl_table,
      ucma_ctl_table,
      memory_allocation_profiling_sysctls,
      loadpin_sysctl_table
    };
    @@

    + const
    struct ctl_table table_name [] = { ... };

sed:
    sed --in-place \
      -e "s/struct ctl_table .table = &uts_kern/const struct ctl_table *table = \&uts_kern/" \
      kernel/utsname_sysctl.c

Reviewed-by: Song Liu <song@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> # for kernel/trace/
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # SCSI
Reviewed-by: Darrick J. Wong <djwong@kernel.org> # xfs
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Bill O'Donnell <bodonnel@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Acked-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Acked-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Joel Granados <joel.granados@kernel.org>

Pull tracing updates from Steven Rostedt:

 - Cleanup with guard() and free() helpers

   There were several places in the code that had a lot of "goto out" in
   the error paths to either unlock a lock or free some memory that was
   allocated. But this is error prone. Convert the code over to use the
   guard() and free() helpers that let the compiler unlock locks or free
   memory when the function exits.

 - Update the Rust tracepoint code to use the C code too

   There was some duplication of the tracepoint code for Rust that did
   the same logic as the C code. Add a helper that makes it possible for
   both algorithms to use the same logic in one place.

 - Add poll to trace event hist files

   It is useful to know when an event is triggered, or even with some
   filtering. Since hist files of events get updated when active and the
   event is triggered, allow applications to poll the hist file and wake
   up when an event is triggered. This will let the application know
   that the event it is waiting for happened.

 - Add :mod: command to enable events for current or future modules

   The function tracer already has a way to enable functions to be
   traced in modules by writing ":mod:<module>" into set_ftrace_filter.
   That will enable either all the functions for the module if it is
   loaded, or if it is not, it will cache that command, and when the
   module is loaded that matches <module>, its functions will be
   enabled. This also allows init functions to be traced. But currently
   events do not have that feature.

   Add the command where if ':mod:<module>' is written into set_event,
   then either all the modules events are enabled if it is loaded, or
   cache it so that the module's events are enabled when it is loaded.
   This also works from the kernel command line, where
   "trace_event=:mod:<module>", when the module is loaded at boot up,
   its events will be enabled then.

* tag 'trace-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (26 commits)
  tracing: Fix output of set_event for some cached module events
  tracing: Fix allocation of printing set_event file content
  tracing: Rename update_cache() to update_mod_cache()
  tracing: Fix #if CONFIG_MODULES to #ifdef CONFIG_MODULES
  selftests/ftrace: Add test that tests event :mod: commands
  tracing: Cache ":mod:" events for modules not loaded yet
  tracing: Add :mod: command to enabled module events
  selftests/tracing: Add hist poll() support test
  tracing/hist: Support POLLPRI event for poll on histogram
  tracing/hist: Add poll(POLLIN) support on hist file
  tracing: Fix using ret variable in tracing_set_tracer()
  tracepoint: Reduce duplication of __DO_TRACE_CALL
  tracing/string: Create and use __free(argv_free) in trace_dynevent.c
  tracing: Switch trace_stat.c code over to use guard()
  tracing: Switch trace_stack.c code over to use guard()
  tracing: Switch trace_osnoise.c code over to use guard() and __free()
  tracing: Switch trace_events_synth.c code over to use guard()
  tracing: Switch trace_events_filter.c code over to use guard()
  tracing: Switch trace_events_trigger.c code over to use guard()
  tracing: Switch trace_events_hist.c code over to use guard()
  ...

Pull ftrace updates from Steven Rostedt:

 - Have fprobes built on top of function graph infrastructure

   The fprobe logic is an optimized kprobe that uses ftrace to attach to
   functions when a probe is needed at the start or end of the function.
   The fprobe and kretprobe logic implements a similar method as the
   function graph tracer to trace the end of the function. That is to
   hijack the return address and jump to a trampoline to do the trace
   when the function exits. To do this, a shadow stack needs to be
   created to store the original return address. Fprobes and function
   graph do this slightly differently. Fprobes (and kretprobes) has
   slots per callsite that are reserved to save the return address. This
   is fine when just a few points are traced. But users of fprobes, such
   as BPF programs, are starting to add many more locations, and this
   method does not scale.

   The function graph tracer was created to trace all functions in the
   kernel. In order to do this, when function graph tracing is started,
   every task gets its own shadow stack to hold the return address that
   is going to be traced. The function graph tracer has been updated to
   allow multiple users to use its infrastructure. Now have fprobes be
   one of those users. This will also allow for the fprobe and kretprobe
   methods to trace the return address to become obsolete. With new
   technologies like CFI that need to know about these methods of
   hijacking the return address, going toward a solution that has only
   one method of doing this will make the kernel less complex.

 - Cleanup with guard() and free() helpers

   There were several places in the code that had a lot of "goto out" in
   the error paths to either unlock a lock or free some memory that was
   allocated. But this is error prone. Convert the code over to use the
   guard() and free() helpers that let the compiler unlock locks or free
   memory when the function exits.

 - Remove disabling of interrupts in the function graph tracer

   When function graph tracer was first introduced, it could race with
   interrupts and NMIs. To prevent that race, it would disable
   interrupts and not trace NMIs. But the code has changed to allow NMIs
   and also interrupts. This change was done a long time ago, but the
   disabling of interrupts was never removed. Remove the disabling of
   interrupts in the function graph tracer is it is not needed. This
   greatly improves its performance.

 - Allow the :mod: command to enable tracing module functions on the
   kernel command line.

   The function tracer already has a way to enable functions to be
   traced in modules by writing ":mod:<module>" into set_ftrace_filter.
   That will enable either all the functions for the module if it is
   loaded, or if it is not, it will cache that command, and when the
   module is loaded that matches <module>, its functions will be
   enabled. This also allows init functions to be traced. But currently
   events do not have that feature.

   Because enabling function tracing can be done very early at boot up
   (before scheduling is enabled), the commands that can be done when
   function tracing is started is limited. Having the ":mod:" command to
   trace module functions as they are loaded is very useful. Update the
   kernel command line function filtering to allow it.

* tag 'ftrace-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (26 commits)
  ftrace: Implement :mod: cache filtering on kernel command line
  tracing: Adopt __free() and guard() for trace_fprobe.c
  bpf: Use ftrace_get_symaddr() for kprobe_multi probes
  ftrace: Add ftrace_get_symaddr to convert fentry_ip to symaddr
  Documentation: probes: Update fprobe on function-graph tracer
  selftests/ftrace: Add a test case for repeating register/unregister fprobe
  selftests: ftrace: Remove obsolate maxactive syntax check
  tracing/fprobe: Remove nr_maxactive from fprobe
  fprobe: Add fprobe_header encoding feature
  fprobe: Rewrite fprobe on function-graph tracer
  s390/tracing: Enable HAVE_FTRACE_GRAPH_FUNC
  ftrace: Add CONFIG_HAVE_FTRACE_GRAPH_FUNC
  bpf: Enable kprobe_multi feature if CONFIG_FPROBE is enabled
  tracing/fprobe: Enable fprobe events with CONFIG_DYNAMIC_FTRACE_WITH_ARGS
  tracing: Add ftrace_fill_perf_regs() for perf event
  tracing: Add ftrace_partial_regs() for converting ftrace_regs to pt_regs
  fprobe: Use ftrace_regs in fprobe exit handler
  fprobe: Use ftrace_regs in fprobe entry handler
  fgraph: Pass ftrace_regs to retfunc
  fgraph: Replace fgraph_ret_regs with ftrace_regs
  ...

Module functions can be set to set_ftrace_filter before the module is
loaded.

  # echo :mod:snd_hda_intel > set_ftrace_filter

This will enable all the functions for the module snd_hda_intel. If that
module is not loaded, it is "cached" in the trace array for when the
module is loaded, its functions will be traced.

But this is not implemented in the kernel command line. That's because the
kernel command line filtering is added very early in boot up as it is
needed to be done before boot time function tracing can start, which is
also available very early in boot up. The code used by the
"set_ftrace_filter" file can not be used that early as it depends on some
other initialization to occur first. But some of the functions can.

Implement the ":mod:" feature of "set_ftrace_filter" in the kernel command
line parsing. Now function tracing on just a single module that is loaded
at boot up can be done.

Adding:

 ftrace=function ftrace_filter=:mod:sna_hda_intel

To the kernel command line will only enable the sna_hda_intel module
functions when the module is loaded, and it will start tracing.

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250116175832.34e39779@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

When the :mod: command is written into /sys/kernel/tracing/set_event (or
that file within an instance), if the module specified after the ":mod:"
is not yet loaded, it will store that string internally. When the module
is loaded, it will enable the events as if the module was loaded when the
string was written into the set_event file.

This can also be useful to enable events that are in the init section of
the module, as the events are enabled before the init section is executed.

This also works on the kernel command line:

 trace_event=:mod:<module>

Will enable the events for <module> when it is loaded.

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250116143533.514730995@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Commit c132be2c4fcc ("function_graph: Have the instances use their own
ftrace_ops for filtering"), function profiler (enabled via
function_profile_enabled) has been showing statistics for all functions,
ignoring set_ftrace_filter settings.

While tracers are instantiated, the function profiler is not. Therefore, it
should use the global set_ftrace_filter for consistency.  This patch
modifies the function profiler to use the global filter, fixing the
filtering functionality.

Before (filtering not working):
```
root@localhost:~# echo 'vfs*' > /sys/kernel/tracing/set_ftrace_filter
root@localhost:~# echo 1 > /sys/kernel/tracing/function_profile_enabled
root@localhost:~# sleep 1
root@localhost:~# echo 0 > /sys/kernel/tracing/function_profile_enabled
root@localhost:~# head /sys/kernel/tracing/trace_stat/*
  Function                               Hit    Time            Avg
     s^2
  --------                               ---    ----            ---
     ---
  schedule                               314    22290594 us     70989.15 us
     40372231 us
  x64_sys_call                          1527    8762510 us      5738.382 us
     3414354 us
  schedule_hrtimeout_range               176    8665356 us      49234.98 us
     405618876 us
  __x64_sys_ppoll                        324    5656635 us      17458.75 us
     19203976 us
  do_sys_poll                            324    5653747 us      17449.83 us
     19214945 us
  schedule_timeout                        67    5531396 us      82558.15 us
     2136740827 us
  __x64_sys_pselect6                      12    3029540 us      252461.7 us
     63296940171 us
  do_pselect.constprop.0                  12    3029532 us      252461.0 us
     63296952931 us
```

After (filtering working):
```
root@localhost:~# echo 'vfs*' > /sys/kernel/tracing/set_ftrace_filter
root@localhost:~# echo 1 > /sys/kernel/tracing/function_profile_enabled
root@localhost:~# sleep 1
root@localhost:~# echo 0 > /sys/kernel/tracing/function_profile_enabled
root@localhost:~# head /sys/kernel/tracing/trace_stat/*
  Function                               Hit    Time            Avg
     s^2
  --------                               ---    ----            ---
     ---
  vfs_write                              462    68476.43 us     148.217 us
     25874.48 us
  vfs_read                               641    9611.356 us     14.994 us
     28868.07 us
  vfs_fstat                              890    878.094 us      0.986 us
     1.667 us
  vfs_fstatat                            227    757.176 us      3.335 us
     18.928 us
  vfs_statx                              226    610.610 us      2.701 us
     17.749 us
  vfs_getattr_nosec                     1187    460.919 us      0.388 us
     0.326 us
  vfs_statx_path                         297    343.287 us      1.155 us
     11.116 us
  vfs_rename                               6    291.575 us      48.595 us
     9889.236 us
```

Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250101190820.72534-1-enjuk@amazon.com
Fixes: c132be2c4fcc ("function_graph: Have the instances use their own ftrace_ops for filtering")
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Pass ftrace_regs to the fgraph_ops::retfunc(). If ftrace_regs is not
available, it passes a NULL instead. User callback function can access
some registers (including return address) via this ftrace_regs.

Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/173518992972.391279.14055405490327765506.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Pass ftrace_regs to the fgraph_ops::entryfunc(). If ftrace_regs is not
available, it passes a NULL instead. User callback function can access
some registers (including return address) via this ftrace_regs.

Note that the ftrace_regs can be NULL when the arch does NOT define:
HAVE_DYNAMIC_FTRACE_WITH_ARGS or HAVE_DYNAMIC_FTRACE_WITH_REGS.
More specifically, if HAVE_DYNAMIC_FTRACE_WITH_REGS is defined but
not the HAVE_DYNAMIC_FTRACE_WITH_ARGS, and the ftrace ops used to
register the function callback does not set FTRACE_OPS_FL_SAVE_REGS.
In this case, ftrace_regs can be NULL in user callback.

Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/173518990044.391279.17406984900626078579.stgit@devnote2
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

There are a few functions in ftrace.c that have "goto out" or equivalent
on error in order to release locks that were taken. This can be error
prone or just simply make the code more complex.

Switch every location that ends with unlocking a mutex on error over to
using the guard(mutex)() infrastructure to let the compiler worry about
releasing locks. This makes the code easier to read and understand.

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20241223184941.718001540@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

There are some goto jumps to exit a program to just return a value. The
code after the label doesn't free anything nor does it do any unlocks. It
simply returns the variable that was set before the jump.

Remove these unneeded goto jumps.

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20241223184941.544855549@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>