linux-toradex.git/kernel/trace/trace_output.c, branch v3.5-rc6

tracing: Fix stacktrace of latency tracers (irqsoff and friends)

2012-04-19T21:00:13+00:00

While debugging a latency with someone on IRC (mirage335) on #linux-rt (OFTC),
we discovered that the stacktrace output of the latency tracers
(preemptirqsoff) was empty.

This bug was caused by the creation of the dynamic length stack trace
again (like commit 12b5da3 "tracing: Fix ent_size in trace output" was).

This bug is caused by the latency tracers requiring the next event
to determine the time between the current event and the next. But by
grabbing the next event, the iter->ent_size is set to the next event
instead of the current one. As the stacktrace event is the last event,
this makes the ent_size zero and causes nothing to be printed for
the stack trace. The dynamic stacktrace uses the ent_size to determine
how much of the stack can be printed. The ent_size of zero means
no stack.

The simple fix is to save the iter->ent_size before finding the next event.

Note, mirage335 asked to remain anonymous from LKML and git, so I will
not add the Reported-by and Tested-by tags, even though he did report
the issue and tested the fix.

Cc: stable@vger.kernel.org # 3.1+
Signed-off-by: Steven Rostedt

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2012-03-21T20:36:41+00:00

Pull vfs pile 1 from Al Viro:
 "This is _not_ all; in particular, Miklos' and Jan's stuff is not there
  yet."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (64 commits)
  ext4: initialization of ext4_li_mtx needs to be done earlier
  debugfs-related mode_t whack-a-mole
  hfsplus: add an ioctl to bless files
  hfsplus: change finder_info to u32
  hfsplus: initialise userflags
  qnx4: new helper - try_extent()
  qnx4: get rid of qnx4_bread/qnx4_getblk
  take removal of PF_FORKNOEXEC to flush_old_exec()
  trim includes in inode.c
  um: uml_dup_mmap() relies on ->mmap_sem being held, but activate_mm() doesn't hold it
  um: embed ->stub_pages[] into mmu_context
  gadgetfs: list_for_each_safe() misuse
  ocfs2: fix leaks on failure exits in module_init
  ecryptfs: make register_filesystem() the last potential failure exit
  ntfs: forgets to unregister sysctls on register_filesystem() failure
  logfs: missing cleanup on register_filesystem() failure
  jfs: mising cleanup on register_filesystem() failure
  make configfs_pin_fs() return root dentry on success
  configfs: configfs_create_dir() has parent dentry in dentry->d_parent
  configfs: sanitize configfs_create()
  ...

constify path argument of trace_seq_path()

2012-03-21T01:29:40+00:00

Signed-off-by: Al Viro

tracing: Don't use p->len field to determine output in __print_*() functions

2012-02-21T16:08:13+00:00

If more than one __print_*() function is used in a tracepoint
(__print_flags(), __print_symbols(), etc), then the temp seq buffer will
not be zero on entry. Using the temp seq buffer's length to know if
data has been printed or not in the current function is incorrect and
may produce incorrect results.

Currently, no in-tree tracepoint causes this bug, but new ones may
be created.

Cc: Andrew Vagin 
Signed-off-by: Steven Rostedt

tracing: Don't print an extra separator of flags

2012-02-21T01:33:31+00:00

If __print_flags() is used after another __print_*() function, the
temp seq_file buffer will not be empty on entry, and the delimiter will
be printed even though there's just one field. We get something like:

	|S

instead of just:

	S

This is because the length of the temp seq buffer is used to determine
if the delimiter is printed or not. But this algorithm fails when
the seq buffer is not empty on entry, and the delimiter will be printed
because it thinks that a previous field was already printed.

Link: http://lkml.kernel.org/r/1329650167-480655-1-git-send-email-avagin@openvz.org

Signed-off-by: Andrew Vagin 
Cc: Ingo Molnar 
Cc: Frederic Weisbecker 
Signed-off-by: Steven Rostedt

tracing: Add irq, preempt-count and need resched info to default trace output

2011-11-17T14:58:48+00:00

People keep asking how to get the preempt count, irq, and need resched info
and we keep telling them to enable the latency format. Some developers think
that traces without this info is completely useless, and for a lot of tasks
it is useless.

The first option was to enable the latency trace as the default format, but
the header for the latency format is pretty useless for most tracers and
it also does the timestamp in straight microseconds from the time the trace
started. This is sometimes more difficult to read as the default trace is
seconds from the start of boot up.

Latency format:

 # tracer: nop
 #
 # nop latency trace v1.1.5 on 3.2.0-rc1-test+
 # --------------------------------------------------------------------
 # latency: 0 us, #159771/64234230, CPU#1 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:4)
 #    -----------------
 #    | task: -0 (uid:0 nice:0 policy:0 rt_prio:0)
 #    -----------------
 #
 #                  _------=> CPU#
 #                 / _-----=> irqs-off
 #                | / _----=> need-resched
 #                || / _---=> hardirq/softirq
 #                ||| / _--=> preempt-depth
 #                |||| /     delay
 #  cmd     pid   ||||| time  |   caller
 #     \   /      |||||  \    |   /
 migratio-6       0...2 41778231us+: rcu_note_context_switch <-__schedule
 migratio-6       0...2 41778233us : trace_rcu_utilization <-rcu_note_context_switch
 migratio-6       0...2 41778235us+: rcu_sched_qs <-rcu_note_context_switch
 migratio-6       0d..2 41778236us+: rcu_preempt_qs <-rcu_note_context_switch
 migratio-6       0...2 41778238us : trace_rcu_utilization <-rcu_note_context_switch
 migratio-6       0...2 41778239us+: debug_lockdep_rcu_enabled <-__schedule

default format:

 # tracer: nop
 #
 #           TASK-PID    CPU#    TIMESTAMP  FUNCTION
 #              | |       |          |         |
      migration/0-6     [000]    50.025810: rcu_note_context_switch <-__schedule
      migration/0-6     [000]    50.025812: trace_rcu_utilization <-rcu_note_context_switch
      migration/0-6     [000]    50.025813: rcu_sched_qs <-rcu_note_context_switch
      migration/0-6     [000]    50.025815: rcu_preempt_qs <-rcu_note_context_switch
      migration/0-6     [000]    50.025817: trace_rcu_utilization <-rcu_note_context_switch
      migration/0-6     [000]    50.025818: debug_lockdep_rcu_enabled <-__schedule
      migration/0-6     [000]    50.025820: debug_lockdep_rcu_enabled <-__schedule

The latency format header has latency information that is pretty meaningless
for most tracers. Although some of the header is useful, and we can add that
later to the default format as well.

What is really useful with the latency format is the irqs-off, need-resched
hard/softirq context and the preempt count.

This commit adds the option irq-info which is on by default that adds this
information:

 # tracer: nop
 #
 #                              _-----=> irqs-off
 #                             / _----=> need-resched
 #                            | / _---=> hardirq/softirq
 #                            || / _--=> preempt-depth
 #                            ||| /     delay
 #           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
 #              | |       |   ||||       |         |
           -0     [000] d..2    49.309305: cpuidle_get_driver <-cpuidle_idle_call
           -0     [000] d..2    49.309307: mwait_idle <-cpu_idle
           -0     [000] d..2    49.309309: need_resched <-mwait_idle
           -0     [000] d..2    49.309310: test_ti_thread_flag <-need_resched
           -0     [000] d..2    49.309312: trace_power_start.constprop.13 <-mwait_idle
           -0     [000] d..2    49.309313: trace_cpu_idle <-mwait_idle
           -0     [000] d..2    49.309315: need_resched <-mwait_idle

If a user wants the old format, they can disable the 'irq-info' option:

 # tracer: nop
 #
 #           TASK-PID   CPU#      TIMESTAMP  FUNCTION
 #              | |       |          |         |
           -0     [000]     49.309305: cpuidle_get_driver <-cpuidle_idle_call
           -0     [000]     49.309307: mwait_idle <-cpu_idle
           -0     [000]     49.309309: need_resched <-mwait_idle
           -0     [000]     49.309310: test_ti_thread_flag <-need_resched
           -0     [000]     49.309312: trace_power_start.constprop.13 <-mwait_idle
           -0     [000]     49.309313: trace_cpu_idle <-mwait_idle
           -0     [000]     49.309315: need_resched <-mwait_idle

Requested-by: Thomas Gleixner 
Signed-off-by: Steven Rostedt

tracing: Have dynamic size event stack traces

2011-07-14T20:36:53+00:00

Currently the stack trace per event in ftace is only 8 frames.
This can be quite limiting and sometimes useless. Especially when
the "ignore frames" is wrong and we also use up stack frames for
the event processing itself.

Change this to be dynamic by adding a percpu buffer that we can
write a large stack frame into and then copy into the ring buffer.

For interrupts and NMIs that come in while another event is being
process, will only get to use the 8 frame stack. That should be enough
as the task that it interrupted will have the full stack frame anyway.

Requested-by: Thomas Gleixner 
Signed-off-by: Steven Rostedt

tracing: Add __print_symbolic_u64 to avoid warnings on 32bit machine

2011-05-26T02:13:44+00:00

Filesystem, like Btrfs, has some "ULL" macros, and when these macros are passed
to tracepoints'__print_symbolic(), there will be 64->32 truncate WARNINGS during
compiling on 32bit box.

Signed-off-by: Liu Bo 
Link: http://lkml.kernel.org/r/4DACE6E0.7000507@cn.fujitsu.com
Signed-off-by: Steven Rostedt

tracing: Avoid soft lockup in trace_pipe

2011-04-04T16:18:24+00:00

running following commands:

  # enable the binary option
  echo 1 > ./options/bin
  # disable context info option
  echo 0 > ./options/context-info
  # tracing only events
  echo 1 > ./events/enable
  cat trace_pipe

plus forcing system to generate many tracing events,
is causing lockup (in NON preemptive kernels) inside
tracing_read_pipe function.

The issue is also easily reproduced by running ltp stress test.
(ftrace_stress_test.sh)

The reasons are:
 - bin/hex/raw output functions for events are set to
   trace_nop_print function, which prints nothing and
   returns TRACE_TYPE_HANDLED value
 - LOST EVENT trace do not handle trace_seq overflow

These reasons force the while loop in tracing_read_pipe
function never to break.

The attached patch fixies handling of lost event trace, and
changes trace_nop_print to print minimal info, which is needed
for the correct tracing_read_pipe processing.

v2 changes:
 - omit the cond_resched changes by trace_nop_print changes
 - WARN changed to WARN_ONCE and added info to be able
   to find out the culprit

v3 changes:
 - make more accurate patch comment

Signed-off-by: Jiri Olsa 
LKML-Reference: <20110325110518.GC1922@jolsa.brq.redhat.com>
Signed-off-by: Steven Rostedt

tracing: Adjust conditional expression latency formatting.

2011-03-10T15:34:35+00:00

Formatting change only to improve code readability. No code changes except to
introduce intermediate variables.

Signed-off-by: David Sharp 
LKML-Reference: <1291421609-14665-13-git-send-email-dhsharp@google.com>

[ Keep variable declarations and assignment separate ]

Signed-off-by: Steven Rostedt