The Linux kernel adopted the SPDX License format headers to ease license
compliance management, and uses the C++ '//' style comments for the SPDX
header tags. Some files in the tracing directory used the C style /* */
comments for them. To be consistent across all files, replace the /* */
C style SPDX tags with the C++ // SPDX tags.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

seq_print_user_ip() is used in only one location in one file. Turn it into a
static function. We could inject its code into the caller, but that would
make the code a bit too complex. Keep the code separate.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

seq_print_userip_objs() is used only in one location, in one file. Instead
of having it as an external function, go one further than making it static,
but inject is code into its only user. It doesn't make the calling function
much more complex.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

The name "ftrace" really refers to the function hook infrastructure. It
is not about the trace_events. The functions (un)register_ftrace_event() is
really about trace_events, and the name should be register_trace_event()
instead.

Also renamed ftrace_event_reg() to trace_event_reg() for the same reason.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Adding a trace_seq_has_overflowed() which returns true if the trace_seq
had too much written into it allows us to simplify the code.

Instead of checking the return value of every call to trace_seq_printf()
and friends, they can all be called normally, and at the end we can
return !trace_seq_has_overflowed() instead.

Several functions also return TRACE_TYPE_PARTIAL_LINE when the trace_seq
overflowed and TRACE_TYPE_HANDLED otherwise. Another helper function
was created called trace_handle_return() which takes a trace_seq and
returns these enums. Using this helper function also simplifies the
code.

This change also makes it possible to remove the return values of
trace_seq_printf() and friends. They should instead just be
void functions.

Link: http://lkml.kernel.org/r/20141114011410.365183157@goodmis.org

Reviewed-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Currently trace_seq_putmem_hex() can only take as a parameter a pointer
to something that is 8 bytes or less, otherwise it will overflow the
buffer. This is protected by a macro that encompasses the call to
trace_seq_putmem_hex() that has a BUILD_BUG_ON() for the variable before
it is passed in. This is not very robust and if trace_seq_putmem_hex() ever
gets used outside that macro it will cause issues.

Instead of only being able to produce a hex output of memory that is for
a single word, change it to be more robust and allow any size input.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

The trace_seq_*() functions are a nice utility that allows users to manipulate
buffers with printf() like formats. It has its own trace_seq.h header in
include/linux and should be in its own file. Being tied with trace_output.c
is rather awkward.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

trace_event_mutex is an rw semaphore now, not a mutex, change the name.

Link: http://lkml.kernel.org/r/513D843B.40109@huawei.com

Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
[ Forward ported to my new code ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

The trace_printk() is extremely fast and is very handy as it can be
used in any context (including NMIs!). But it still requires scanning
the fmt string for parsing the args. Even the trace_bprintk() requires
a scan to know what args will be saved, although it doesn't copy the
format string itself.

Several times trace_printk() has no args, and wastes cpu cycles scanning
the fmt string.

Adding trace_puts() allows the developer to use an even faster
tracing method that only saves the pointer to the string in the
ring buffer without doing any format parsing at all. This will
help remove even more of the "Heisenbug" effect, when debugging.

Also fixed up the F_printk()s for the ftrace internal bprint and print events.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>