Pull more tracing fixes from Steven Rostedt:
 "Two more fixes:

   - Change idx variable in DO_TRACE macro to __idx to avoid name
     conflicts. A kvm event had "idx" as a parameter and it confused the
     macro.

   - Fix a race where interrupts would be traced when set_graph_function
     was set. The previous patch set increased a race window that
     tricked the function graph tracer to think it should trace
     interrupts when it really should not have.

     The bug has been there before, but was seldom hit. Only the last
     patch series made it more common"

* tag 'trace-v4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing/fgraph: Fix set_graph_function from showing interrupts
  tracepoint: Use __idx instead of idx in DO_TRACE macro to make it unique

Pull tracing fixes from Steven Rostedt:
 "While rewriting the function graph tracer, I discovered a design flaw
  that was introduced by a patch that tried to fix one bug, but by doing
  so created another bug.

  As both bugs corrupt the output (but they do not crash the kernel), I
  decided to fix the design such that it could have both bugs fixed. The
  original fix, fixed time reporting of the function graph tracer when
  doing a max_depth of one. This was code that can test how much the
  kernel interferes with userspace. But in doing so, it could corrupt
  the time keeping of the function profiler.

  The issue is that the curr_ret_stack variable was being used for two
  different meanings. One was to keep track of the stack pointer on the
  ret_stack (shadow stack used by the function graph tracer), and the
  other use case was the graph call depth. Although, the two may be
  closely related, where they got updated was the issue that lead to the
  two different bugs that required the two use cases to be updated
  differently.

  The big issue with this fix is that it requires changing each
  architecture. The good news is, I was able to remove a lot of code
  that was duplicated within the architectures and place it into a
  single location. Then I could make the fix in one place.

  I pushed this code into linux-next to let it settle over a week, and
  before doing so, I cross compiled all the affected architectures to
  make sure that they built fine.

  In the mean time, I also pulled in a patch that fixes the sched_switch
  previous tasks state output, that was not actually correct"

* tag 'trace-v4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  sched, trace: Fix prev_state output in sched_switch tracepoint
  function_graph: Have profiler use curr_ret_stack and not depth
  function_graph: Reverse the order of pushing the ret_stack and the callback
  function_graph: Move return callback before update of curr_ret_stack
  function_graph: Use new curr_ret_depth to manage depth instead of curr_ret_stack
  function_graph: Make ftrace_push_return_trace() static
  sparc/function_graph: Simplify with function_graph_enter()
  sh/function_graph: Simplify with function_graph_enter()
  s390/function_graph: Simplify with function_graph_enter()
  riscv/function_graph: Simplify with function_graph_enter()
  powerpc/function_graph: Simplify with function_graph_enter()
  parisc: function_graph: Simplify with function_graph_enter()
  nds32: function_graph: Simplify with function_graph_enter()
  MIPS: function_graph: Simplify with function_graph_enter()
  microblaze: function_graph: Simplify with function_graph_enter()
  arm64: function_graph: Simplify with function_graph_enter()
  ARM: function_graph: Simplify with function_graph_enter()
  x86/function_graph: Simplify with function_graph_enter()
  function_graph: Create function_graph_enter() to consolidate architecture code

The tracefs file set_graph_function is used to only function graph functions
that are listed in that file (or all functions if the file is empty). The
way this is implemented is that the function graph tracer looks at every
function, and if the current depth is zero and the function matches
something in the file then it will trace that function. When other functions
are called, the depth will be greater than zero (because the original
function will be at depth zero), and all functions will be traced where the
depth is greater than zero.

The issue is that when a function is first entered, and the handler that
checks this logic is called, the depth is set to zero. If an interrupt comes
in and a function in the interrupt handler is traced, its depth will be
greater than zero and it will automatically be traced, even if the original
function was not. But because the logic only looks at depth it may trace
interrupts when it should not be.

The recent design change of the function graph tracer to fix other bugs
caused the depth to be zero while the function graph callback handler is
being called for a longer time, widening the race of this happening. This
bug was actually there for a longer time, but because the race window was so
small it seldom happened. The Fixes tag below is for the commit that widen
the race window, because that commit belongs to a series that will also help
fix the original bug.

Cc: stable@kernel.org
Fixes: 39eb456dacb5 ("function_graph: Use new curr_ret_depth to manage depth instead of curr_ret_stack")
Reported-by: Joe Lawrence <joe.lawrence@redhat.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

The profiler uses trace->depth to find its entry on the ret_stack, but the
depth may not match the actual location of where its entry is (if an
interrupt were to preempt the processing of the profiler for another
function, the depth and the curr_ret_stack will be different).

Have it use the curr_ret_stack as the index to find its ret_stack entry
instead of using the depth variable, as that is no longer guaranteed to be
the same.

Cc: stable@kernel.org
Fixes: 03274a3ffb449 ("tracing/fgraph: Adjust fgraph depth before calling trace return callback")
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

The function graph profiler uses the ret_stack to store the "subtime" and
reuse it by nested functions and also on the return. But the current logic
has the profiler callback called before the ret_stack is updated, and it is
just modifying the ret_stack that will later be allocated (it's just lucky
that the "subtime" is not touched when it is allocated).

This could also cause a crash if we are at the end of the ret_stack when
this happens.

By reversing the order of the allocating the ret_stack and then calling the
callbacks attached to a function being traced, the ret_stack entry is no
longer used before it is allocated.

Cc: stable@kernel.org
Fixes: 03274a3ffb449 ("tracing/fgraph: Adjust fgraph depth before calling trace return callback")
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

In the past, curr_ret_stack had two functions. One was to denote the depth
of the call graph, the other is to keep track of where on the ret_stack the
data is used. Although they may be slightly related, there are two cases
where they need to be used differently.

The one case is that it keeps the ret_stack data from being corrupted by an
interrupt coming in and overwriting the data still in use. The other is just
to know where the depth of the stack currently is.

The function profiler uses the ret_stack to save a "subtime" variable that
is part of the data on the ret_stack. If curr_ret_stack is modified too
early, then this variable can be corrupted.

The "max_depth" option, when set to 1, will record the first functions going
into the kernel. To see all top functions (when dealing with timings), the
depth variable needs to be lowered before calling the return hook. But by
lowering the curr_ret_stack, it makes the data on the ret_stack still being
used by the return hook susceptible to being overwritten.

Now that there's two variables to handle both cases (curr_ret_depth), we can
move them to the locations where they can handle both cases.

Cc: stable@kernel.org
Fixes: 03274a3ffb449 ("tracing/fgraph: Adjust fgraph depth before calling trace return callback")
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Currently, the depth of the ret_stack is determined by curr_ret_stack index.
The issue is that there's a race between setting of the curr_ret_stack and
calling of the callback attached to the return of the function.

Commit 03274a3ffb44 ("tracing/fgraph: Adjust fgraph depth before calling
trace return callback") moved the calling of the callback to after the
setting of the curr_ret_stack, even stating that it was safe to do so, when
in fact, it was the reason there was a barrier() there (yes, I should have
commented that barrier()).

Not only does the curr_ret_stack keep track of the current call graph depth,
it also keeps the ret_stack content from being overwritten by new data.

The function profiler, uses the "subtime" variable of ret_stack structure
and by moving the curr_ret_stack, it allows for interrupts to use the same
structure it was using, corrupting the data, and breaking the profiler.

To fix this, there needs to be two variables to handle the call stack depth
and the pointer to where the ret_stack is being used, as they need to change
at two different locations.

Cc: stable@kernel.org
Fixes: 03274a3ffb449 ("tracing/fgraph: Adjust fgraph depth before calling trace return callback")
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

As all architectures now call function_graph_enter() to do the entry work,
no architecture should ever call ftrace_push_return_trace(). Make it static.

This is needed to prepare for a fix of a design bug on how the curr_ret_stack
is used.

Cc: stable@kernel.org
Fixes: 03274a3ffb449 ("tracing/fgraph: Adjust fgraph depth before calling trace return callback")
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Currently all the architectures do basically the same thing in preparing the
function graph tracer on entry to a function. This code can be pulled into a
generic location and then this will allow the function graph tracer to be
fixed, as well as extended.

Create a new function graph helper function_graph_enter() that will call the
hook function (ftrace_graph_entry) and the shadow stack operation
(ftrace_push_return_trace), and remove the need of the architecture code to
manage the shadow stack.

This is needed to prepare for a fix of a design bug on how the curr_ret_stack
is used.

Cc: stable@kernel.org
Fixes: 03274a3ffb449 ("tracing/fgraph: Adjust fgraph depth before calling trace return callback")
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

A format string consisting of "%p" or "%s" followed by an invalid
specifier (e.g. "%p%\n" or "%s%") could pass the check which
would make format_decode (lib/vsprintf.c) to warn.

Fixes: 9c959c863f82 ("tracing: Allow BPF programs to call bpf_trace_printk()")
Reported-by: syzbot+1ec5c5ec949c4adaa0c4@syzkaller.appspotmail.com
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>