Pull block fixes from Jens Axboe:

 - NVMe pull request via Christoph:
      - Don't access released socket during error recovery (Akinobu
        Mita)
      - Bring back auto-removal of deleted namespaces during sequential
        scan (Christoph Hellwig)
      - Fix an error code in nvme_auth_process_dhchap_challenge (Dan
        Carpenter)
      - Show well known discovery name (Daniel Wagner)
      - Add a missing endianess conversion in effects masking (Keith
        Busch)

 - Fix for a regression introduced in blk-rq-qos during init in this
   merge window (Breno)

 - Reorder a few fields in struct blk_mq_tag_set, eliminating a few
   holes and shrinking it (Christophe)

 - Remove redundant bdev_get_queue() NULL checks (Juhyung)

 - Add sed-opal single user mode support flag (Luca)

 - Remove SQE128 check in ublk as it isn't needed, saving some memory
   (Ming)

 - Op specific segment checking for cloned requests (Uday)

 - Exclusive open partition scan fixes (Yu)

 - Loop offset/size checking before assigning them in the device (Zhong)

 - Bio polling fixes (me)

* tag 'block-6.3-2023-03-03' of git://git.kernel.dk/linux:
  blk-mq: enforce op-specific segment limits in blk_insert_cloned_request
  nvme-fabrics: show well known discovery name
  nvme-tcp: don't access released socket during error recovery
  nvme-auth: fix an error code in nvme_auth_process_dhchap_challenge()
  nvme: bring back auto-removal of deleted namespaces during sequential scan
  blk-iocost: Pass gendisk to ioc_refresh_params
  nvme: fix sparse warning on effects masking
  block: be a bit more careful in checking for NULL bdev while polling
  block: clear bio->bi_bdev when putting a bio back in the cache
  loop: loop_set_status_from_info() check before assignment
  ublk: remove check IO_URING_F_SQE128 in ublk_ch_uring_cmd
  block: remove more NULL checks after bdev_get_queue()
  blk-mq: Reorder fields in 'struct blk_mq_tag_set'
  block: fix scan partition for exclusively open device again
  block: Revert "block: Do not reread partition table on exclusively open device"
  sed-opal: add support flag for SUM in status ioctl

Pull kprobes cleanup updates from Masami Hiramatsu:
 "These are probe events cleanups, no new features but improve
  readability:

   - Rename print_probe_args() to trace_probe_print_args() and
     un-inline it

   - Introduce a set of default data fetch functions for dynamic
     probe events

   - Extract common code of data fetch process of dynamic probe events"

* tag 'probes-v6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  kernel/trace: extract common part in process_fetch_insn
  kernel/trace: Provide default impelentations defined in trace_probe_tmpl.h
  kernel/trace: Introduce trace_probe_print_args and use it in *probes

Pull alpha updates from Al Viro:
 "Mostly small janitorial fixes but there's also more important ones: a
  patch to fix loading large modules from Edward Humes, and some fixes
  from Al Viro"

[ The fixes from Al mostly came in separately through Al's trees too and
  are now duplicated..   - Linus ]

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
  alpha: in_irq() cleanup
  alpha: lazy FPU switching
  alpha/boot/misc: trim unused declarations
  alpha/boot/tools/objstrip: fix the check for ELF header
  alpha/boot: fix the breakage from -isystem series...
  alpha: fix FEN fault handling
  alpha: Avoid comma separated statements
  alpha: fixed a typo in core_cia.c
  alpha: remove unused __SLOW_DOWN_IO and SLOW_DOWN_IO definitions
  alpha: update config files
  alpha: fix R_ALPHA_LITERAL reloc for large modules
  alpha: Add some spaces to ensure format specification
  alpha: replace NR_SYSCALLS by NR_syscalls
  alpha: Remove redundant local asm header redirections
  alpha: Implement "current_stack_pointer"
  alpha: remove redundant err variable
  alpha: osf_sys: reduce kernel log spamming on invalid osf_mount call typenr

Each probe has an instance of process_fetch_insn respectively,
but they have something in common.

This patch aims to extract the common part into
process_common_fetch_insn which can be shared by each probe,
and they only need to focus on their special cases.

Signed-off-by: Song Chen <chensong_2000@189.cn>
Suggested-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>

There are 6 function definitions in trace_probe_tmpl.h, they are:

1, fetch_store_strlen
2, fetch_store_string
3, fetch_store_strlen_user
4, fetch_store_string_user
5, probe_mem_read
6, probe_mem_read_user

Every C file which includes trace_probe_tmpl.h has to implement them,
otherwise it gets warnings and errors. However, some of them are identical,
like kprobe and eprobe, as a result, there is a lot redundant code in those
2 files.

This patch would like to provide default behaviors for those functions
which kprobe and eprobe can share by just including trace_probe_kernel.h
with trace_probe_tmpl.h together.

It removes redundant code, increases readability, and more importantly,
makes it easier to introduce a new feature based on trace probe
(it's possible).

Link: https://lore.kernel.org/all/1672382018-18347-1-git-send-email-chensong_2000@189.cn/

Signed-off-by: Song Chen <chensong_2000@189.cn>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

print_probe_args is currently inplemented in trace_probe_tmpl.h and
included by *probes, as a result, each probe has an identical copy.

This patch will move it to trace_probe.c as an new API, each probe
calls it to print their args in trace file.

Link: https://lore.kernel.org/all/1672382000-18304-1-git-send-email-chensong_2000@189.cn/

Signed-off-by: Song Chen <chensong_2000@189.cn>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

Pull kprobes updates from Masami Hiramatsu:

 - Skip negative return code check for snprintf in eprobe

 - Add recursive call test cases for kprobe unit test

 - Add 'char' type to probe events to show it as the character instead
   of value

 - Update kselftest kprobe-event testcase to ignore '__pfx_' symbols

 - Fix kselftest to check filter on eprobe event correctly

 - Add filter on eprobe to the README file in tracefs

 - Fix optprobes to check whether there is 'under unoptimizing' optprobe
   when optimizing another kprobe correctly

 - Fix optprobe to check whether there is 'under unoptimizing' optprobe
   when fetching the original instruction correctly

 - Fix optprobe to free 'forcibly unoptimized' optprobe correctly

* tag 'probes-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/eprobe: no need to check for negative ret value for snprintf
  test_kprobes: Add recursed kprobe test case
  tracing/probe: add a char type to show the character value of traced arguments
  selftests/ftrace: Fix probepoint testcase to ignore __pfx_* symbols
  selftests/ftrace: Fix eprobe syntax test case to check filter support
  tracing/eprobe: Fix to add filter on eprobe description in README file
  x86/kprobes: Fix arch_check_optimized_kprobe check within optimized_kprobe range
  x86/kprobes: Fix __recover_optprobed_insn check optimizing logic
  kprobes: Fix to handle forcibly unoptimized kprobes on freeing_list

Pull tracing updates from Steven Rostedt:

 - Add function names as a way to filter function addresses

 - Add sample module to test ftrace ops and dynamic trampolines

 - Allow stack traces to be passed from beginning event to end event for
   synthetic events. This will allow seeing the stack trace of when a
   task is scheduled out and recorded when it gets scheduled back in.

 - Add trace event helper __get_buf() to use as a temporary buffer when
   printing out trace event output.

 - Add kernel command line to create trace instances on boot up.

 - Add enabling of events to instances created at boot up.

 - Add trace_array_puts() to write into instances.

 - Allow boot instances to take a snapshot at the end of boot up.

 - Allow live patch modules to include trace events

 - Minor fixes and clean ups

* tag 'trace-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (31 commits)
  tracing: Remove unnecessary NULL assignment
  tracepoint: Allow livepatch module add trace event
  tracing: Always use canonical ftrace path
  tracing/histogram: Fix stacktrace histogram Documententation
  tracing/histogram: Fix stacktrace key
  tracing/histogram: Fix a few problems with stacktrace variable printing
  tracing: Add BUILD_BUG() to make sure stacktrace fits in strings
  tracing/histogram: Don't use strlen to find length of stacktrace variables
  tracing: Allow boot instances to have snapshot buffers
  tracing: Add trace_array_puts() to write into instance
  tracing: Add enabling of events to boot instances
  tracing: Add creation of instances at boot command line
  tracing: Fix trace_event_raw_event_synth() if else statement
  samples: ftrace: Make some global variables static
  ftrace: sample: avoid open-coded 64-bit division
  samples: ftrace: Include the nospec-branch.h only for x86
  tracing: Acquire buffer from temparary trace sequence
  tracing/histogram: Wrap remaining shell snippets in code blocks
  tracing/osnoise: No need for schedule_hrtimeout range
  bpf/tracing: Use stage6 of tracing to not duplicate macros
  ...

Pull tracing fix from Steven Rostedt:
 "Fix race that causes a warning of corrupt ring buffer

  With the change that allows to read the "trace" file without disabling
  writing to the ring buffer, there was an integrity check of the ring
  buffer in the iterator read code, that expected the ring buffer to be
  write disabled. This caused the integrity check to trigger when stress
  reading the "trace" file while writing was happening.

  The integrity check is a bit aggressive (and has never triggered in
  practice). Change it so that it checks just the integrity of the
  linked pages without clearing the flags inside the pointers. This
  removes the warning that was being triggered"

[ Heh. This was supposed to have gone in last week before the 6.2
  release, but Steven forgot to actually add me to the participants of
  the pull request, so here it is, a week later   - Linus ]

* tag 'trace-v6.2-rc7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  ring-buffer: Handle race between rb_move_tail and rb_check_pages

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...