linux-toradex.git/kernel/tracepoint.c, branch v5.12-rc5

tracepoints: Code clean up

2021-02-09T17:27:29+00:00

Restructure the code a bit to make it simpler, fix some formatting problems
and add READ_ONCE/WRITE_ONCE to make sure there's no compiler load/store
tearing to the variables that can be accessed across CPUs.

Started with Mathieu Desnoyers's patch:

  Link: https://lore.kernel.org/lkml/20210203175741.20665-1-mathieu.desnoyers@efficios.com/

And will keep his signature, but I will take the responsibility of this
being correct, and keep the authorship.

Link: https://lkml.kernel.org/r/20210204143004.61126582@gandalf.local.home

Signed-off-by: Mathieu Desnoyers 
Signed-off-by: Steven Rostedt (VMware)

tracepoint: Do not fail unregistering a probe due to memory failure

2021-02-02T22:02:07+00:00

The list of tracepoint callbacks is managed by an array that is protected
by RCU. To update this array, a new array is allocated, the updates are
copied over to the new array, and then the list of functions for the
tracepoint is switched over to the new array. After a completion of an RCU
grace period, the old array is freed.

This process happens for both adding a callback as well as removing one.
But on removing a callback, if the new array fails to be allocated, the
callback is not removed, and may be used after it is freed by the clients
of the tracepoint.

There's really no reason to fail if the allocation for a new array fails
when removing a function. Instead, the function can simply be replaced by a
stub function that could be cleaned up on the next modification of the
array. That is, instead of calling the function registered to the
tracepoint, it would call a stub function in its place.

Link: https://lore.kernel.org/r/20201115055256.65625-1-mmullins@mmlx.us
Link: https://lore.kernel.org/r/20201116175107.02db396d@gandalf.local.home
Link: https://lore.kernel.org/r/20201117211836.54acaef2@oasis.local.home
Link: https://lkml.kernel.org/r/20201118093405.7a6d2290@gandalf.local.home

[ Note, this version does use undefined compiler behavior (assuming that
  a stub function with no parameters or return, can be called by a location
  that thinks it has parameters but still no return value. Static calls
  do the same thing, so this trick is not without precedent.

  There's another solution that uses RCU tricks and is more complex, but
  can be an alternative if this solution becomes an issue.

  Link: https://lore.kernel.org/lkml/20210127170721.58bce7cc@gandalf.local.home/
]

Cc: Peter Zijlstra 
Cc: Josh Poimboeuf 
Cc: Mathieu Desnoyers 
Cc: Ingo Molnar 
Cc: Alexei Starovoitov 
Cc: Daniel Borkmann 
Cc: Dmitry Vyukov 
Cc: Martin KaFai Lau 
Cc: Song Liu 
Cc: Yonghong Song 
Cc: Andrii Nakryiko 
Cc: John Fastabend 
Cc: KP Singh 
Cc: netdev 
Cc: bpf 
Cc: Kees Cook 
Cc: Florian Weimer 
Fixes: 97e1c18e8d17b ("tracing: Kernel Tracepoints")
Reported-by: syzbot+83aa762ef23b6f0d1991@syzkaller.appspotmail.com
Reported-by: syzbot+d29e58bb557324e55e5e@syzkaller.appspotmail.com
Reported-by: Matt Mullins 
Signed-off-by: Steven Rostedt (VMware) 
Tested-by: Matt Mullins

tracepoints: Migrate to use SYSCALL_WORK flag

2020-11-16T20:53:15+00:00

On architectures using the generic syscall entry code the architecture
independent syscall work is moved to flags in thread_info::syscall_work.
This removes architecture dependencies and frees up TIF bits.

Define SYSCALL_WORK_SYSCALL_TRACEPOINT, use it in the generic entry code
and convert the code which uses the TIF specific helper functions to use
the new *_syscall_work() helpers which either resolve to the new mode for
users of the generic entry code or to the TIF based functions for the other
architectures.

Signed-off-by: Gabriel Krisman Bertazi 
Signed-off-by: Thomas Gleixner 
Reviewed-by: Andy Lutomirski 
Link: https://lore.kernel.org/r/20201116174206.2639648-6-krisman@collabora.com

tracepoint: Replace zero-length array with flexible-array member

2020-10-29T22:22:59+00:00

There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays

Signed-off-by: Gustavo A. R. Silva

tracepoint: Fix out of sync data passing by static caller

2020-10-02T19:18:25+00:00

Naresh reported a bug that appears to be a side effect of the static
calls. It happens when going from more than one tracepoint callback to
a single one, and removing the first callback on the list. The list of
tracepoint callbacks holds data and a function to call with the
parameters of that tracepoint and a handler to the associated data.

 old_list:
	0: func = foo; data = NULL;
	1: func = bar; data = &bar_struct;

 new_list:
	0: func = bar; data = &bar_struct;

	CPU 0				CPU 1
	-----				-----
   tp_funcs = old_list;
   tp_static_caller = tp_interator

   __DO_TRACE()

    data = tp_funcs[0].data = NULL;

				   tp_funcs = new_list;
				   tracepoint_update_call()
				      tp_static_caller = tp_funcs[0] = bar;
    tp_static_caller(data)
       bar(data)
         x = data->item = NULL->item

       BOOM!

To solve this, add a tracepoint_synchronize_unregister() between
changing tp_funcs and updating the static tracepoint, that does both a
synchronize_rcu() and synchronize_srcu(). This will ensure that when
the static call is updated to the single callback that it will be
receiving the data that it registered with.

Fixes: d25e37d89dd2f ("tracepoint: Optimize using static_call()")
Reported-by: Naresh Kamboju 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Peter Zijlstra (Intel) 
Link: https://lore.kernel.org/linux-next/CA+G9fYvPXVRO0NV7yL=FxCmFEMYkCwdz7R=9W+_votpT824YJA@mail.gmail.com

tracepoint: Optimize using static_call()

2020-09-01T07:58:06+00:00

Currently the tracepoint site will iterate a vector and issue indirect
calls to however many handlers are registered (ie. the vector is
long).

Using static_call() it is possible to optimize this for the common
case of only having a single handler registered. In this case the
static_call() can directly call this handler. Otherwise, if the vector
is longer than 1, call a function that iterates the whole vector like
the current code.

[peterz: updated to new interface]

Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Peter Zijlstra (Intel) 
Signed-off-by: Ingo Molnar 
Cc: Linus Torvalds 
Link: https://lore.kernel.org/r/20200818135805.279421092@infradead.org

module: Fix up module_notifier return values

2020-09-01T07:58:03+00:00

While auditing all module notifiers I noticed a whole bunch of fail
wrt the return value. Notifiers have a 'special' return semantics.

As is; NOTIFY_DONE vs NOTIFY_OK is a bit vague; but
notifier_from_errno(0) results in NOTIFY_OK and NOTIFY_DONE has a
comment that says "Don't care".

From this I've used NOTIFY_DONE when the function completely ignores
the callback and notifier_to_error() isn't used.

Signed-off-by: Peter Zijlstra (Intel) 
Signed-off-by: Ingo Molnar 
Reviewed-by: Mathieu Desnoyers 
Reviewed-by: Joel Fernandes (Google) 
Reviewed-by: Robert Richter 
Acked-by: Steven Rostedt (VMware) 
Link: https://lore.kernel.org/r/20200818135804.385360407@infradead.org

Merge tag 'trace-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

2019-07-18T18:51:00+00:00

Pull tracing updates from Steven Rostedt:
 "The main changes in this release include:

   - Add user space specific memory reading for kprobes

   - Allow kprobes to be executed earlier in boot

  The rest are mostly just various clean ups and small fixes"

* tag 'trace-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (33 commits)
  tracing: Make trace_get_fields() global
  tracing: Let filter_assign_type() detect FILTER_PTR_STRING
  tracing: Pass type into tracing_generic_entry_update()
  ftrace/selftest: Test if set_event/ftrace_pid exists before writing
  ftrace/selftests: Return the skip code when tracing directory not configured in kernel
  tracing/kprobe: Check registered state using kprobe
  tracing/probe: Add trace_event_call accesses APIs
  tracing/probe: Add probe event name and group name accesses APIs
  tracing/probe: Add trace flag access APIs for trace_probe
  tracing/probe: Add trace_event_file access APIs for trace_probe
  tracing/probe: Add trace_event_call register API for trace_probe
  tracing/probe: Add trace_probe init and free functions
  tracing/uprobe: Set print format when parsing command
  tracing/kprobe: Set print format right after parsed command
  kprobes: Fix to init kprobes in subsys_initcall
  tracepoint: Use struct_size() in kmalloc()
  ring-buffer: Remove HAVE_64BIT_ALIGNED_ACCESS
  ftrace: Enable trampoline when rec count returns back to one
  tracing/kprobe: Do not run kprobe boot tests if kprobe_event is on cmdline
  tracing: Make a separate config for trace event self tests
  ...

tracepoint: Use struct_size() in kmalloc()

2019-06-18T01:13:32+00:00

One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:

struct tp_probes {
	...
        struct tracepoint_func probes[0];
};

instance = kmalloc(sizeof(sizeof(struct tp_probes) +
			sizeof(struct tracepoint_func) * count, GFP_KERNEL);

Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:

instance = kmalloc(struct_size(instance, probes, count) GFP_KERNEL);

This code was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva 
Signed-off-by: Steven Rostedt (VMware)

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156

2019-05-30T18:26:35+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not write to the free software foundation inc
  59 temple place suite 330 boston ma 02111 1307 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1334 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Reviewed-by: Richard Fontana 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman