linux-toradex.git/kernel/tsacct.c, branch v3.15-rc8

cputime: Use accessors to read task cputime stats

2013-01-27T18:23:31+00:00

This is in preparation for the full dynticks feature. While
remotely reading the cputime of a task running in a full
dynticks CPU, we'll need to do some extra-computation. This
way we can account the time it spent tickless in userspace
since its last cputime snapshot.

Signed-off-by: Frederic Weisbecker 
Cc: Andrew Morton 
Cc: Ingo Molnar 
Cc: Li Zhong 
Cc: Namhyung Kim 
Cc: Paul E. McKenney 
Cc: Paul Gortmaker 
Cc: Peter Zijlstra 
Cc: Steven Rostedt 
Cc: Thomas Gleixner

userns: Convert taskstats to handle the user and pid namespaces.

2012-09-18T08:01:32+00:00

- Explicitly limit exit task stat broadcast to the initial user and
  pid namespaces, as it is already limited to the initial network
  namespace.

- For broadcast task stats explicitly generate all of the idenitiers
  in terms of the initial user namespace and the initial pid
  namespace.

- For request stats report them in terms of the current user namespace
  and the current pid namespace.  Netlink messages are delivered
  syncrhonously to the kernel allowing us to get the user namespace
  and the pid namespace from the current task.

- Pass the namespaces for representing pids and uids and gids
  into bacct_add_task.

Cc: Balbir Singh 
Signed-off-by: Eric W. Biederman

[S390] cputime: add sparse checking and cleanup

2011-12-15T13:56:19+00:00

Make cputime_t and cputime64_t nocast to enable sparse checking to
detect incorrect use of cputime. Drop the cputime macros for simple
scalar operations. The conversion macros are still needed.

Signed-off-by: Martin Schwidefsky

Make taskstats round statistics down to nearest 1k bytes/events

2011-09-20T00:10:57+00:00

Even with just the interface limited to admin, there really is little to
reason to give byte-per-byte counts for taskstats.  So round it down to
something less intrusive.

Acked-by: Balbir Singh 
Signed-off-by: Linus Torvalds

taskstats: use real microsecond granularity for CPU times

2010-10-28T01:03:17+00:00

The taskstats interface uses microsecond granularity for the user and
system time values.  The conversion from cputime to the taskstats values
uses the cputime_to_msecs primitive which effectively limits the
granularity to milliseconds.  Add the cputime_to_usecs primitive for
architectures that have better, more precise CPU time values.  Remove
cputime_to_msecs primitive because there are no more users left.

Signed-off-by: Michael Holzheu 
Acked-by: Balbir Singh 
Cc: Luck Tony 
Cc: Shailabh Nagar 
Cc: Martin Schwidefsky 
Cc: Oleg Nesterov 
Cc: Benjamin Herrenschmidt 
Cc: Heiko Carstens 
Cc: Thomas Gleixner 
Cc: Shailabh Nagar 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: clean up mm_counter

2010-03-06T19:26:23+00:00

Presently, per-mm statistics counter is defined by macro in sched.h

This patch modifies it to
  - defined in mm.h as inlinf functions
  - use array instead of macro's name creation.

This patch is for reducing patch size in future patch to modify
implementation of per-mm counter.

Signed-off-by: KAMEZAWA Hiroyuki 
Reviewed-by: Minchan Kim 
Cc: Christoph Lameter 
Cc: Lee Schermerhorn 
Cc: David Rientjes 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Fix fixpoint divide exception in acct_update_integrals

2009-03-09T15:13:35+00:00

Frans Pop reported the crash below when running an s390 kernel under Hercules:

  Kernel BUG at 000738b4  verbose debug info unavailable!
  fixpoint divide exception: 0009  #1! SMP
  Modules linked in: nfs lockd nfs_acl sunrpc ctcm fsm tape_34xx
     cu3088 tape ccwgroup tape_class ext3 jbd mbcache dm_mirror dm_log dm_snapshot
     dm_mod dasd_eckd_mod dasd_mod
  CPU: 0 Not tainted 2.6.27.19 #13
  Process awk (pid: 2069, task: 0f9ed9b8, ksp: 0f4f7d18)
  Krnl PSW : 070c1000 800738b4 (acct_update_integrals+0x4c/0x118)
             R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:1 PM:0
  Krnl GPRS: 00000000 000007d0 7fffffff fffff830
             00000000 ffffffff 00000002 0f9ed9b8
             00000000 00008ca0 00000000 0f9ed9b8
             0f9edda4 8007386e 0f4f7ec8 0f4f7e98
  Krnl Code: 800738aa: a71807d0         lhi     %r1,2000
             800738ae: 8c200001         srdl    %r2,1
             800738b2: 1d21             dr      %r2,%r1
            >800738b4: 5810d10e         l       %r1,270(%r13)
             800738b8: 1823             lr      %r2,%r3
             800738ba: 4130f060         la      %r3,96(%r15)
             800738be: 0de1             basr    %r14,%r1
             800738c0: 5800f060         l       %r0,96(%r15)
  Call Trace:
  ( <000000000004fdea>! blocking_notifier_call_chain+0x1e/0x2c)
    <0000000000038502>! do_exit+0x106/0x7c0
    <0000000000038c36>! do_group_exit+0x7a/0xb4
    <0000000000038c8e>! SyS_exit_group+0x1e/0x30
    <0000000000021c28>! sysc_do_restart+0x12/0x16
    <0000000077e7e924>! 0x77e7e924

Reason for this is that cpu time accounting usually only happens from
interrupt context, but acct_update_integrals gets also called from
process context with interrupts enabled.

So in acct_update_integrals we may end up with the following scenario:

Between reading tsk->stime/tsk->utime and tsk->acct_timexpd an interrupt
happens which updates accouting values.  This causes acct_timexpd to be
greater than the former stime + utime.  The subsequent calculation of

	dtime = cputime_sub(time, tsk->acct_timexpd);

will be negative and the division performed by

	cputime_to_jiffies(dtime)

will generate an exception since the result won't fit into a 32 bit
register.

In order to fix this just always disable interrupts while accessing any
of the accounting values.

Reported by: Frans Pop 
Tested by: Frans Pop 
Cc: stable@kernel.org
Cc: Martin Schwidefsky 
Signed-off-by: Heiko Carstens 
Signed-off-by: Linus Torvalds

mm: introduce get_mm_hiwater_xxx(), fix taskstats->hiwater_xxx accounting

2009-01-06T23:59:09+00:00

xacct_add_tsk() relies on do_exit()->update_hiwater_xxx() and uses
mm->hiwater_xxx directly, this leads to 2 problems:

- taskstats_user_cmd() can call fill_pid()->xacct_add_tsk() at any
  moment before the task exits, so we should check the current values of
  rss/vm anyway.

- do_exit()->update_hiwater_xxx() calls are racy.  An exiting thread can
  be preempted right before mm->hiwater_xxx = new_val, and another thread
  can use A_LOT of memory and exit in between.  When the first thread
  resumes it can be the last thread in the thread group, in that case we
  report the wrong hiwater_xxx values which do not take A_LOT into
  account.

Introduce get_mm_hiwater_rss() and get_mm_hiwater_vm() helpers and change
xacct_add_tsk() to use them.  The first helper will also be used by
rusage->ru_maxrss accounting.

Kill do_exit()->update_hiwater_xxx() calls.  Unless we are going to
decrease rss/vm there is no point to update mm->hiwater_xxx, and nobody
can look at this mm_struct when exit_mmap() actually unmaps the memory.

Signed-off-by: Oleg Nesterov 
Acked-by: Hugh Dickins 
Reviewed-by: KOSAKI Motohiro 
Acked-by: Balbir Singh 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

CRED: Use RCU to access another task's creds and to release a task's own creds

2008-11-13T23:39:19+00:00

Use RCU to access another task's creds and to release a task's own creds.
This means that it will be possible for the credentials of a task to be
replaced without another task (a) requiring a full lock to read them, and (b)
seeing deallocated memory.

Signed-off-by: David Howells 
Acked-by: James Morris 
Acked-by: Serge Hallyn 
Signed-off-by: James Morris

CRED: Separate task security context from task_struct

2008-11-13T23:39:16+00:00

Separate the task security context from task_struct.  At this point, the
security data is temporarily embedded in the task_struct with two pointers
pointing to it.

Note that the Alpha arch is altered as it refers to (E)UID and (E)GID in
entry.S via asm-offsets.

With comment fixes Signed-off-by: Marc Dionne 

Signed-off-by: David Howells 
Acked-by: James Morris 
Acked-by: Serge Hallyn 
Signed-off-by: James Morris