linux-toradex.git/kernel, branch v3.12.32

perf: Handle compat ioctl

2014-10-31T14:11:31+00:00

commit b3f207855f57b9c8f43a547a801340bb5cbc59e5 upstream.

When running a 32-bit userspace on a 64-bit kernel (eg. i386
application on x86_64 kernel or 32-bit arm userspace on arm64
kernel) some of the perf ioctls must be treated with special
care, as they have a pointer size encoded in the command.

For example, PERF_EVENT_IOC_ID in 32-bit world will be encoded
as 0x80042407, but 64-bit kernel will expect 0x80082407. In
result the ioctl will fail returning -ENOTTY.

This patch solves the problem by adding code fixing up the
size as compat_ioctl file operation.

Reported-by: Drew Richardson 
Signed-off-by: Pawel Moll 
Signed-off-by: Peter Zijlstra 
Cc: Arnaldo Carvalho de Melo 
Cc: Jiri Olsa 
Link: http://lkml.kernel.org/r/1402671812-9078-1-git-send-email-pawel.moll@arm.com
Signed-off-by: Ingo Molnar 
Signed-off-by: Jiri Slaby

jiffies: Fix timeval conversion to jiffies

2014-10-13T14:09:20+00:00

commit d78c9300c51d6ceed9f6d078d4e9366f259de28c upstream.

timeval_to_jiffies tried to round a timeval up to an integral number
of jiffies, but the logic for doing so was incorrect: intervals
corresponding to exactly N jiffies would become N+1. This manifested
itself particularly repeatedly stopping/starting an itimer:

setitimer(ITIMER_PROF, &val, NULL);
setitimer(ITIMER_PROF, NULL, &val);

would add a full tick to val, _even if it was exactly representable in
terms of jiffies_ (say, the result of a previous rounding.)  Doing
this repeatedly would cause unbounded growth in val.  So fix the math.

Here's what was wrong with the conversion: we essentially computed
(eliding seconds)

jiffies = usec  * (NSEC_PER_USEC/TICK_NSEC)

by using scaling arithmetic, which took the best approximation of
NSEC_PER_USEC/TICK_NSEC with denominator of 2^USEC_JIFFIE_SC =
x/(2^USEC_JIFFIE_SC), and computed:

jiffies = (usec * x) >> USEC_JIFFIE_SC

and rounded this calculation up in the intermediate form (since we
can't necessarily exactly represent TICK_NSEC in usec.) But the
scaling arithmetic is a (very slight) *over*approximation of the true
value; that is, instead of dividing by (1 usec/ 1 jiffie), we
effectively divided by (1 usec/1 jiffie)-epsilon (rounding
down). This would normally be fine, but we want to round timeouts up,
and we did so by adding 2^USEC_JIFFIE_SC - 1 before the shift; this
would be fine if our division was exact, but dividing this by the
slightly smaller factor was equivalent to adding just _over_ 1 to the
final result (instead of just _under_ 1, as desired.)

In particular, with HZ=1000, we consistently computed that 10000 usec
was 11 jiffies; the same was true for any exact multiple of
TICK_NSEC.

We could possibly still round in the intermediate form, adding
something less than 2^USEC_JIFFIE_SC - 1, but easier still is to
convert usec->nsec, round in nanoseconds, and then convert using
time*spec*_to_jiffies.  This adds one constant multiplication, and is
not observably slower in microbenchmarks on recent x86 hardware.

Tested: the following program:

int main() {
  struct itimerval zero = {{0, 0}, {0, 0}};
  /* Initially set to 10 ms. */
  struct itimerval initial = zero;
  initial.it_interval.tv_usec = 10000;
  setitimer(ITIMER_PROF, &initial, NULL);
  /* Save and restore several times. */
  for (size_t i = 0; i < 10; ++i) {
    struct itimerval prev;
    setitimer(ITIMER_PROF, &zero, &prev);
    /* on old kernels, this goes up by TICK_USEC every iteration */
    printf("previous value: %ld %ld %ld %ld\n",
           prev.it_interval.tv_sec, prev.it_interval.tv_usec,
           prev.it_value.tv_sec, prev.it_value.tv_usec);
    setitimer(ITIMER_PROF, &prev, NULL);
  }
    return 0;
}


Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Cc: Paul Turner 
Cc: Richard Cochran 
Cc: Prarit Bhargava 
Reviewed-by: Paul Turner 
Reported-by: Aaron Jacobs 
Signed-off-by: Andrew Hunter 
[jstultz: Tweaked to apply to 3.17-rc]
Signed-off-by: John Stultz 
[bwh: Backported to 3.16: adjust filename]
Signed-off-by: Ben Hutchings 
Signed-off-by: Jiri Slaby

ring-buffer: Fix infinite spin in reading buffer

2014-10-13T14:09:19+00:00

commit 24607f114fd14f2f37e3e0cb3d47bce96e81e848 upstream.

Commit 651e22f2701b "ring-buffer: Always reset iterator to reader page"
fixed one bug but in the process caused another one. The reset is to
update the header page, but that fix also changed the way the cached
reads were updated. The cache reads are used to test if an iterator
needs to be updated or not.

A ring buffer iterator, when created, disables writes to the ring buffer
but does not stop other readers or consuming reads from happening.
Although all readers are synchronized via a lock, they are only
synchronized when in the ring buffer functions. Those functions may
be called by any number of readers. The iterator continues down when
its not interrupted by a consuming reader. If a consuming read
occurs, the iterator starts from the beginning of the buffer.

The way the iterator sees that a consuming read has happened since
its last read is by checking the reader "cache". The cache holds the
last counts of the read and the reader page itself.

Commit 651e22f2701b changed what was saved by the cache_read when
the rb_iter_reset() occurred, making the iterator never match the cache.
Then if the iterator calls rb_iter_reset(), it will go into an
infinite loop by checking if the cache doesn't match, doing the reset
and retrying, just to see that the cache still doesn't match! Which
should never happen as the reset is suppose to set the cache to the
current value and there's locks that keep a consuming reader from
having access to the data.

Fixes: 651e22f2701b "ring-buffer: Always reset iterator to reader page"
Signed-off-by: Steven Rostedt 
Signed-off-by: Jiri Slaby

perf: fix perf bug in fork()

2014-10-13T14:09:18+00:00

commit 6c72e3501d0d62fc064d3680e5234f3463ec5a86 upstream.

Oleg noticed that a cleanup by Sylvain actually uncovered a bug; by
calling perf_event_free_task() when failing sched_fork() we will not yet
have done the memset() on ->perf_event_ctxp[] and will therefore try and
'free' the inherited contexts, which are still in use by the parent
process.  This is bad..

Suggested-by: Oleg Nesterov 
Reported-by: Oleg Nesterov 
Reported-by: Sylvain 'ythier' Hitier 
Signed-off-by: Peter Zijlstra (Intel) 
Cc: Ingo Molnar 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Jiri Slaby

PM / sleep: Use valid_state() for platform-dependent sleep states only

2014-10-13T13:41:38+00:00

commit 43e8317b0bba1d6eb85f38a4a233d82d7c20d732 upstream.

Use the observation that, for platform-dependent sleep states
(PM_SUSPEND_STANDBY, PM_SUSPEND_MEM), a given state is either
always supported or always unsupported and store that information
in pm_states[] instead of calling valid_state() every time we
need to check it.

Also do not use valid_state() for PM_SUSPEND_FREEZE, which is always
valid, and move the pm_test_level validity check for PM_SUSPEND_FREEZE
directly into enter_state().

Signed-off-by: Rafael J. Wysocki 
Cc: Brian Norris 
Signed-off-by: Jiri Slaby

PM / sleep: Add state field to pm_states[] entries

2014-10-13T13:41:38+00:00

commit 27ddcc6596e50cb8f03d2e83248897667811d8f6 upstream.

To allow sleep states corresponding to the "mem", "standby" and
"freeze" lables to be different from the pm_states[] indexes of
those strings, introduce struct pm_sleep_state, consisting of
a string label and a state number, and turn pm_states[] into an
array of objects of that type.

This modification should not lead to any functional changes.

Signed-off-by: Rafael J. Wysocki 
Cc: Brian Norris 
Signed-off-by: Jiri Slaby

perf: Fix a race condition in perf_remove_from_context()

2014-10-13T13:41:35+00:00

commit 3577af70a2ce4853d58e57d832e687d739281479 upstream.

We saw a kernel soft lockup in perf_remove_from_context(),
it looks like the `perf` process, when exiting, could not go
out of the retry loop. Meanwhile, the target process was forking
a child. So either the target process should execute the smp
function call to deactive the event (if it was running) or it should
do a context switch which deactives the event.

It seems we optimize out a context switch in perf_event_context_sched_out(),
and what's more important, we still test an obsolete task pointer when
retrying, so no one actually would deactive that event in this situation.
Fix it directly by reloading the task pointer in perf_remove_from_context().

This should cure the above soft lockup.

Signed-off-by: Cong Wang 
Signed-off-by: Cong Wang 
Signed-off-by: Peter Zijlstra 
Cc: Paul Mackerras 
Cc: Arnaldo Carvalho de Melo 
Cc: Linus Torvalds 
Link: http://lkml.kernel.org/r/1409696840-843-1-git-send-email-xiyou.wangcong@gmail.com
Signed-off-by: Ingo Molnar 
Signed-off-by: Jiri Slaby

alarmtimer: Lock k_itimer during timer callback

2014-10-13T13:41:34+00:00

commit 474e941bed9262f5fa2394f9a4a67e24499e5926 upstream.

Locks the k_itimer's it_lock member when handling the alarm timer's
expiry callback.

The regular posix timers defined in posix-timers.c have this lock held
during timout processing because their callbacks are routed through
posix_timer_fn().  The alarm timers follow a different path, so they
ought to grab the lock somewhere else.

Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Cc: Richard Cochran 
Cc: Prarit Bhargava 
Cc: Sharvil Nanavati 
Signed-off-by: Richard Larocque 
Signed-off-by: John Stultz 
Signed-off-by: Jiri Slaby

alarmtimer: Do not signal SIGEV_NONE timers

2014-10-13T13:41:33+00:00

commit 265b81d23a46c39df0a735a3af4238954b41a4c2 upstream.

Avoids sending a signal to alarm timers created with sigev_notify set to
SIGEV_NONE by checking for that special case in the timeout callback.

The regular posix timers avoid sending signals to SIGEV_NONE timers by
not scheduling any callbacks for them in the first place.  Although it
would be possible to do something similar for alarm timers, it's simpler
to handle this as a special case in the timeout.

Prior to this patch, the alarm timer would ignore the sigev_notify value
and try to deliver signals to the process anyway.  Even worse, the
sanity check for the value of sigev_signo is skipped when SIGEV_NONE was
specified, so the signal number could be bogus.  If sigev_signo was an
unitialized value (as it often would be if SIGEV_NONE is used), then
it's hard to predict which signal will be sent.

Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Cc: Richard Cochran 
Cc: Prarit Bhargava 
Cc: Sharvil Nanavati 
Signed-off-by: Richard Larocque 
Signed-off-by: John Stultz 
Signed-off-by: Jiri Slaby

alarmtimer: Return relative times in timer_gettime

2014-10-13T13:41:33+00:00

commit e86fea764991e00a03ff1e56409ec9cacdbda4c9 upstream.

Returns the time remaining for an alarm timer, rather than the time at
which it is scheduled to expire.  If the timer has already expired or it
is not currently scheduled, the it_value's members are set to zero.

This new behavior matches that of the other posix-timers and the POSIX
specifications.

This is a change in user-visible behavior, and may break existing
applications.  Hopefully, few users rely on the old incorrect behavior.

Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Cc: Richard Cochran 
Cc: Prarit Bhargava 
Cc: Sharvil Nanavati 
Signed-off-by: Richard Larocque 
[jstultz: minor style tweak]
Signed-off-by: John Stultz 
Signed-off-by: Jiri Slaby