linux-toradex.git/kernel, branch v3.12.34 Linux kernel for Apalis and Colibri modules rcu: Use rcu_gp_kthread_wake() to wake up grace period kthreads 2014-11-19T17:38:26+00:00 Pranith Kumar bobby.prani@gmail.com 2014-08-12T17:07:47+00:00 4ffc1f8b153b3b0e322fbac381ed4c240d1b7106 commit 2aa792e6faf1a00f5accf1f69e87e11a390ba2cd upstream. The rcu_gp_kthread_wake() function checks for three conditions before waking up grace period kthreads: * Is the thread we are trying to wake up the current thread? * Are the gp_flags zero? (all threads wait on non-zero gp_flags condition) * Is there no thread created for this flavour, hence nothing to wake up? If any one of these condition is true, we do not call wake_up(). It was found that there are quite a few avoidable wake ups both during idle time and under stress induced by rcutorture. Idle: Total:66000, unnecessary:66000, case1:61827, case2:66000, case3:0 Total:68000, unnecessary:68000, case1:63696, case2:68000, case3:0 rcutorture: Total:254000, unnecessary:254000, case1:199913, case2:254000, case3:0 Total:256000, unnecessary:256000, case1:201784, case2:256000, case3:0 Here case{1-3} are the cases listed above. We can avoid these wake ups by using rcu_gp_kthread_wake() to conditionally wake up the grace period kthreads. There is a comment about an implied barrier supplied by the wake_up() logic. This barrier is necessary for the awakened thread to see the updated ->gp_flags. This flag is always being updated with the root node lock held. Also, the awakened thread tries to acquire the root node lock before reading ->gp_flags because of which there is proper ordering. Hence this commit tries to avoid calling wake_up() whenever we can by using rcu_gp_kthread_wake() function. Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> CC: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit 2aa792e6faf1a00f5accf1f69e87e11a390ba2cd upstream.

The rcu_gp_kthread_wake() function checks for three conditions before
waking up grace period kthreads:

*  Is the thread we are trying to wake up the current thread?
*  Are the gp_flags zero? (all threads wait on non-zero gp_flags condition)
*  Is there no thread created for this flavour, hence nothing to wake up?

If any one of these condition is true, we do not call wake_up().
It was found that there are quite a few avoidable wake ups both during
idle time and under stress induced by rcutorture.

Idle:

Total:66000, unnecessary:66000, case1:61827, case2:66000, case3:0
Total:68000, unnecessary:68000, case1:63696, case2:68000, case3:0

rcutorture:

Total:254000, unnecessary:254000, case1:199913, case2:254000, case3:0
Total:256000, unnecessary:256000, case1:201784, case2:256000, case3:0

Here case{1-3} are the cases listed above. We can avoid these wake
ups by using rcu_gp_kthread_wake() to conditionally wake up the grace
period kthreads.

There is a comment about an implied barrier supplied by the wake_up()
logic.  This barrier is necessary for the awakened thread to see the
updated ->gp_flags.  This flag is always being updated with the root node
lock held. Also, the awakened thread tries to acquire the root node lock
before reading ->gp_flags because of which there is proper ordering.

Hence this commit tries to avoid calling wake_up() whenever we can by
using rcu_gp_kthread_wake() function.

Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
CC: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
rcu: Make callers awaken grace-period kthread 2014-11-19T17:38:26+00:00 Paul E. McKenney paulmck@linux.vnet.ibm.com 2014-03-11T20:02:16+00:00 9b3128c465d0ad59ca8739b8028bcad4042eb170 commit 48a7639ce80cf279834d0d44865e49ecd714f37d upstream. The rcu_start_gp_advanced() function currently uses irq_work_queue() to defer wakeups of the RCU grace-period kthread. This deferring is necessary to avoid RCU-scheduler deadlocks involving the rcu_node structure's lock, meaning that RCU cannot call any of the scheduler's wake-up functions while holding one of these locks. Unfortunately, the second and subsequent calls to irq_work_queue() are ignored, and the first call will be ignored (aside from queuing the work item) if the scheduler-clock tick is turned off. This is OK for many uses, especially those where irq_work_queue() is called from an interrupt or softirq handler, because in those cases the scheduler-clock-tick state will be re-evaluated, which will turn the scheduler-clock tick back on. On the next tick, any deferred work will then be processed. However, this strategy does not always work for RCU, which can be invoked at process level from idle CPUs. In this case, the tick might never be turned back on, indefinitely defering a grace-period start request. Note that the RCU CPU stall detector cannot see this condition, because there is no RCU grace period in progress. Therefore, we can (and do!) see long tens-of-seconds stalls in grace-period handling. In theory, we could see a full grace-period hang, but rcutorture testing to date has seen only the tens-of-seconds stalls. Event tracing demonstrates that irq_work_queue() is being called repeatedly to no effect during these stalls: The "newreq" event appears repeatedly from a task that is not one of the grace-period kthreads. In theory, irq_work_queue() might be fixed to avoid this sort of issue, but RCU's requirements are unusual and it is quite straightforward to pass wake-up responsibility up through RCU's call chain, so that the wakeup happens when the offending locks are released. This commit therefore makes this change. The rcu_start_gp_advanced(), rcu_start_future_gp(), rcu_accelerate_cbs(), rcu_advance_cbs(), __note_gp_changes(), and rcu_start_gp() functions now return a boolean which indicates when a wake-up is needed. A new rcu_gp_kthread_wake() does the wakeup when it is necessary and safe to do so: No self-wakes, no wake-ups if the ->gp_flags field indicates there is no need (as in someone else did the wake-up before we got around to it), and no wake-ups before the grace-period kthread has been created. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> [ Pranith: backport to 3.13-stable: just rcu_gp_kthread_wake(), prereq for 2aa792e "rcu: Use rcu_gp_kthread_wake() to wake up grace period kthreads" ] Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit 48a7639ce80cf279834d0d44865e49ecd714f37d upstream.

The rcu_start_gp_advanced() function currently uses irq_work_queue()
to defer wakeups of the RCU grace-period kthread.  This deferring
is necessary to avoid RCU-scheduler deadlocks involving the rcu_node
structure's lock, meaning that RCU cannot call any of the scheduler's
wake-up functions while holding one of these locks.

Unfortunately, the second and subsequent calls to irq_work_queue() are
ignored, and the first call will be ignored (aside from queuing the work
item) if the scheduler-clock tick is turned off.  This is OK for many
uses, especially those where irq_work_queue() is called from an interrupt
or softirq handler, because in those cases the scheduler-clock-tick state
will be re-evaluated, which will turn the scheduler-clock tick back on.
On the next tick, any deferred work will then be processed.

However, this strategy does not always work for RCU, which can be invoked
at process level from idle CPUs.  In this case, the tick might never
be turned back on, indefinitely defering a grace-period start request.
Note that the RCU CPU stall detector cannot see this condition, because
there is no RCU grace period in progress.  Therefore, we can (and do!)
see long tens-of-seconds stalls in grace-period handling.  In theory,
we could see a full grace-period hang, but rcutorture testing to date
has seen only the tens-of-seconds stalls.  Event tracing demonstrates
that irq_work_queue() is being called repeatedly to no effect during
these stalls: The "newreq" event appears repeatedly from a task that is
not one of the grace-period kthreads.

In theory, irq_work_queue() might be fixed to avoid this sort of issue,
but RCU's requirements are unusual and it is quite straightforward to pass
wake-up responsibility up through RCU's call chain, so that the wakeup
happens when the offending locks are released.

This commit therefore makes this change.  The rcu_start_gp_advanced(),
rcu_start_future_gp(), rcu_accelerate_cbs(), rcu_advance_cbs(),
__note_gp_changes(), and rcu_start_gp() functions now return a boolean
which indicates when a wake-up is needed.  A new rcu_gp_kthread_wake()
does the wakeup when it is necessary and safe to do so: No self-wakes,
no wake-ups if the ->gp_flags field indicates there is no need (as in
someone else did the wake-up before we got around to it), and no wake-ups
before the grace-period kthread has been created.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
[ Pranith: backport to 3.13-stable: just rcu_gp_kthread_wake(),
  prereq for 2aa792e "rcu: Use rcu_gp_kthread_wake() to wake up grace
  period kthreads" ]
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
audit: keep inode pinned 2014-11-19T17:38:16+00:00 Miklos Szeredi mszeredi@suse.cz 2014-11-04T10:27:12+00:00 24c0902a16c983802418f4a77b7fca0604f3a3e6 commit 799b601451b21ebe7af0e6e8f6e2ccd4683c5064 upstream. Audit rules disappear when an inode they watch is evicted from the cache. This is likely not what we want. The guilty commit is "fsnotify: allow marks to not pin inodes in core", which didn't take into account that audit_tree adds watches with a zero mask. Adding any mask should fix this. Fixes: 90b1e7a57880 ("fsnotify: allow marks to not pin inodes in core") Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Paul Moore <pmoore@redhat.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit 799b601451b21ebe7af0e6e8f6e2ccd4683c5064 upstream.

Audit rules disappear when an inode they watch is evicted from the cache.
This is likely not what we want.

The guilty commit is "fsnotify: allow marks to not pin inodes in core",
which didn't take into account that audit_tree adds watches with a zero
mask.

Adding any mask should fix this.

Fixes: 90b1e7a57880 ("fsnotify: allow marks to not pin inodes in core")
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
posix-timers: Fix stack info leak in timer_create() 2014-11-13T18:03:02+00:00 Mathias Krause minipli@googlemail.com 2014-10-04T21:06:39+00:00 5bc8c3bd8e5784110da1e8c8aaff086672107a1d commit 6891c4509c792209c44ced55a60f13954cb50ef4 upstream. If userland creates a timer without specifying a sigevent info, we'll create one ourself, using a stack local variable. Particularly will we use the timer ID as sival_int. But as sigev_value is a union containing a pointer and an int, that assignment will only partially initialize sigev_value on systems where the size of a pointer is bigger than the size of an int. On such systems we'll copy the uninitialized stack bytes from the timer_create() call to userland when the timer actually fires and we're going to deliver the signal. Initialize sigev_value with 0 to plug the stack info leak. Found in the PaX patch, written by the PaX Team. Fixes: 5a9fa7307285 ("posix-timers: kill ->it_sigev_signo and...") Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Brad Spengler <spender@grsecurity.net> Cc: PaX Team <pageexec@freemail.hu> Link: http://lkml.kernel.org/r/1412456799-32339-1-git-send-email-minipli@googlemail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit 6891c4509c792209c44ced55a60f13954cb50ef4 upstream.

If userland creates a timer without specifying a sigevent info, we'll
create one ourself, using a stack local variable. Particularly will we
use the timer ID as sival_int. But as sigev_value is a union containing
a pointer and an int, that assignment will only partially initialize
sigev_value on systems where the size of a pointer is bigger than the
size of an int. On such systems we'll copy the uninitialized stack bytes
from the timer_create() call to userland when the timer actually fires
and we're going to deliver the signal.

Initialize sigev_value with 0 to plug the stack info leak.

Found in the PaX patch, written by the PaX Team.

Fixes: 5a9fa7307285 ("posix-timers: kill ->it_sigev_signo and...")
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Brad Spengler <spender@grsecurity.net>
Cc: PaX Team <pageexec@freemail.hu>
Link: http://lkml.kernel.org/r/1412456799-32339-1-git-send-email-minipli@googlemail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
PM / Sleep: fix recovery during resuming from hibernation 2014-11-13T18:03:01+00:00 Imre Deak imre.deak@intel.com 2014-10-24T17:29:10+00:00 f40d14580cb56b248d3e744b94c9324778983c19 commit 94fb823fcb4892614f57e59601bb9d4920f24711 upstream. If a device's dev_pm_ops::freeze callback fails during the QUIESCE phase, we don't rollback things correctly calling the thaw and complete callbacks. This could leave some devices in a suspended state in case of an error during resuming from hibernation. Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit 94fb823fcb4892614f57e59601bb9d4920f24711 upstream.

If a device's dev_pm_ops::freeze callback fails during the QUIESCE
phase, we don't rollback things correctly calling the thaw and complete
callbacks. This could leave some devices in a suspended state in case of
an error during resuming from hibernation.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
OOM, PM: OOM killed task shouldn't escape PM suspend 2014-11-13T18:02:40+00:00 Michal Hocko mhocko@suse.cz 2014-10-20T16:12:32+00:00 b76e04699452927c1881b5d364940a3381a692c8 commit 5695be142e203167e3cb515ef86a88424f3524eb upstream. PM freezer relies on having all tasks frozen by the time devices are getting frozen so that no task will touch them while they are getting frozen. But OOM killer is allowed to kill an already frozen task in order to handle OOM situtation. In order to protect from late wake ups OOM killer is disabled after all tasks are frozen. This, however, still keeps a window open when a killed task didn't manage to die by the time freeze_processes finishes. Reduce the race window by checking all tasks after OOM killer has been disabled. This is still not race free completely unfortunately because oom_killer_disable cannot stop an already ongoing OOM killer so a task might still wake up from the fridge and get killed without freeze_processes noticing. Full synchronization of OOM and freezer is, however, too heavy weight for this highly unlikely case. Introduce and check oom_kills counter which gets incremented early when the allocator enters __alloc_pages_may_oom path and only check all the tasks if the counter changes during the freezing attempt. The counter is updated so early to reduce the race window since allocator checked oom_killer_disabled which is set by PM-freezing code. A false positive will push the PM-freezer into a slow path but that is not a big deal. Changes since v1 - push the re-check loop out of freeze_processes into check_frozen_processes and invert the condition to make the code more readable as per Rafael Fixes: f660daac474c6f (oom: thaw threads if oom killed thread is frozen before deferring) Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit 5695be142e203167e3cb515ef86a88424f3524eb upstream.

PM freezer relies on having all tasks frozen by the time devices are
getting frozen so that no task will touch them while they are getting
frozen. But OOM killer is allowed to kill an already frozen task in
order to handle OOM situtation. In order to protect from late wake ups
OOM killer is disabled after all tasks are frozen. This, however, still
keeps a window open when a killed task didn't manage to die by the time
freeze_processes finishes.

Reduce the race window by checking all tasks after OOM killer has been
disabled. This is still not race free completely unfortunately because
oom_killer_disable cannot stop an already ongoing OOM killer so a task
might still wake up from the fridge and get killed without
freeze_processes noticing. Full synchronization of OOM and freezer is,
however, too heavy weight for this highly unlikely case.

Introduce and check oom_kills counter which gets incremented early when
the allocator enters __alloc_pages_may_oom path and only check all the
tasks if the counter changes during the freezing attempt. The counter
is updated so early to reduce the race window since allocator checked
oom_killer_disabled which is set by PM-freezing code. A false positive
will push the PM-freezer into a slow path but that is not a big deal.

Changes since v1
- push the re-check loop out of freeze_processes into
  check_frozen_processes and invert the condition to make the code more
  readable as per Rafael

Fixes: f660daac474c6f (oom: thaw threads if oom killed thread is frozen before deferring)
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
freezer: Do not freeze tasks killed by OOM killer 2014-11-13T18:02:40+00:00 Cong Wang xiyou.wangcong@gmail.com 2014-10-21T07:27:12+00:00 a8b7bdeab0c35d96b7acdf94f90c0594d2a50245 commit 51fae6da640edf9d266c94f36bc806c63c301991 upstream. Since f660daac474c6f (oom: thaw threads if oom killed thread is frozen before deferring) OOM killer relies on being able to thaw a frozen task to handle OOM situation but a3201227f803 (freezer: make freezing() test freeze conditions in effect instead of TIF_FREEZE) has reorganized the code and stopped clearing freeze flag in __thaw_task. This means that the target task only wakes up and goes into the fridge again because the freezing condition hasn't changed for it. This reintroduces the bug fixed by f660daac474c6f. Fix the issue by checking for TIF_MEMDIE thread flag in freezing_slow_path and exclude the task from freezing completely. If a task was already frozen it would get woken by __thaw_task from OOM killer and get out of freezer after rechecking freezing(). Changes since v1 - put TIF_MEMDIE check into freezing_slowpath rather than in __refrigerator as per Oleg - return __thaw_task into oom_scan_process_thread because oom_kill_process will not wake task in the fridge because it is sleeping uninterruptible [mhocko@suse.cz: rewrote the changelog] Fixes: a3201227f803 (freezer: make freezing() test freeze conditions in effect instead of TIF_FREEZE) Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Michal Hocko <mhocko@suse.cz> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit 51fae6da640edf9d266c94f36bc806c63c301991 upstream.

Since f660daac474c6f (oom: thaw threads if oom killed thread is frozen
before deferring) OOM killer relies on being able to thaw a frozen task
to handle OOM situation but a3201227f803 (freezer: make freezing() test
freeze conditions in effect instead of TIF_FREEZE) has reorganized the
code and stopped clearing freeze flag in __thaw_task. This means that
the target task only wakes up and goes into the fridge again because the
freezing condition hasn't changed for it. This reintroduces the bug
fixed by f660daac474c6f.

Fix the issue by checking for TIF_MEMDIE thread flag in
freezing_slow_path and exclude the task from freezing completely. If a
task was already frozen it would get woken by __thaw_task from OOM killer
and get out of freezer after rechecking freezing().

Changes since v1
- put TIF_MEMDIE check into freezing_slowpath rather than in __refrigerator
  as per Oleg
- return __thaw_task into oom_scan_process_thread because
  oom_kill_process will not wake task in the fridge because it is
  sleeping uninterruptible

[mhocko@suse.cz: rewrote the changelog]
Fixes: a3201227f803 (freezer: make freezing() test freeze conditions in effect instead of TIF_FREEZE)
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
modules, lock around setting of MODULE_STATE_UNFORMED 2014-11-13T18:02:22+00:00 Prarit Bhargava prarit@redhat.com 2014-10-13T16:21:39+00:00 860ce42432c4a884c78dec67f03f7b2c22644457 commit d3051b489aa81ca9ba62af366149ef42b8dae97c upstream. A panic was seen in the following sitation. There are two threads running on the system. The first thread is a system monitoring thread that is reading /proc/modules. The second thread is loading and unloading a module (in this example I'm using my simple dummy-module.ko). Note, in the "real world" this occurred with the qlogic driver module. When doing this, the following panic occurred: ------------[ cut here ]------------ kernel BUG at kernel/module.c:3739! invalid opcode: 0000 [#1] SMP Modules linked in: binfmt_misc sg nfsv3 rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache intel_powerclamp coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel lrw igb gf128mul glue_helper iTCO_wdt iTCO_vendor_support ablk_helper ptp sb_edac cryptd pps_core edac_core shpchp i2c_i801 pcspkr wmi lpc_ich ioatdma mfd_core dca ipmi_si nfsd ipmi_msghandler auth_rpcgss nfs_acl lockd sunrpc xfs libcrc32c sr_mod cdrom sd_mod crc_t10dif crct10dif_common mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit drm_kms_helper ttm isci drm libsas ahci libahci scsi_transport_sas libata i2c_core dm_mirror dm_region_hash dm_log dm_mod [last unloaded: dummy_module] CPU: 37 PID: 186343 Comm: cat Tainted: GF O-------------- 3.10.0+ #7 Hardware name: Intel Corporation S2600CP/S2600CP, BIOS RMLSDP.86I.00.29.D696.1311111329 11/11/2013 task: ffff8807fd2d8000 ti: ffff88080fa7c000 task.ti: ffff88080fa7c000 RIP: 0010:[<ffffffff810d64c5>] [<ffffffff810d64c5>] module_flags+0xb5/0xc0 RSP: 0018:ffff88080fa7fe18 EFLAGS: 00010246 RAX: 0000000000000003 RBX: ffffffffa03b5200 RCX: 0000000000000000 RDX: 0000000000001000 RSI: ffff88080fa7fe38 RDI: ffffffffa03b5000 RBP: ffff88080fa7fe28 R08: 0000000000000010 R09: 0000000000000000 R10: 0000000000000000 R11: 000000000000000f R12: ffffffffa03b5000 R13: ffffffffa03b5008 R14: ffffffffa03b5200 R15: ffffffffa03b5000 FS: 00007f6ae57ef740(0000) GS:ffff88101e7a0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000404f70 CR3: 0000000ffed48000 CR4: 00000000001407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffffffffa03b5200 ffff8810101e4800 ffff88080fa7fe70 ffffffff810d666c ffff88081e807300 000000002e0f2fbf 0000000000000000 ffff88100f257b00 ffffffffa03b5008 ffff88080fa7ff48 ffff8810101e4800 ffff88080fa7fee0 Call Trace: [<ffffffff810d666c>] m_show+0x19c/0x1e0 [<ffffffff811e4d7e>] seq_read+0x16e/0x3b0 [<ffffffff812281ed>] proc_reg_read+0x3d/0x80 [<ffffffff811c0f2c>] vfs_read+0x9c/0x170 [<ffffffff811c1a58>] SyS_read+0x58/0xb0 [<ffffffff81605829>] system_call_fastpath+0x16/0x1b Code: 48 63 c2 83 c2 01 c6 04 03 29 48 63 d2 eb d9 0f 1f 80 00 00 00 00 48 63 d2 c6 04 13 2d 41 8b 0c 24 8d 50 02 83 f9 01 75 b2 eb cb <0f> 0b 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 RIP [<ffffffff810d64c5>] module_flags+0xb5/0xc0 RSP <ffff88080fa7fe18> Consider the two processes running on the system. CPU 0 (/proc/modules reader) CPU 1 (loading/unloading module) CPU 0 opens /proc/modules, and starts displaying data for each module by traversing the modules list via fs/seq_file.c:seq_open() and fs/seq_file.c:seq_read(). For each module in the modules list, seq_read does op->start() <-- this is a pointer to m_start() op->show() <- this is a pointer to m_show() op->stop() <-- this is a pointer to m_stop() The m_start(), m_show(), and m_stop() module functions are defined in kernel/module.c. The m_start() and m_stop() functions acquire and release the module_mutex respectively. ie) When reading /proc/modules, the module_mutex is acquired and released for each module. m_show() is called with the module_mutex held. It accesses the module struct data and attempts to write out module data. It is in this code path that the above BUG_ON() warning is encountered, specifically m_show() calls static char *module_flags(struct module *mod, char *buf) { int bx = 0; BUG_ON(mod->state == MODULE_STATE_UNFORMED); ... The other thread, CPU 1, in unloading the module calls the syscall delete_module() defined in kernel/module.c. The module_mutex is acquired for a short time, and then released. free_module() is called without the module_mutex. free_module() then sets mod->state = MODULE_STATE_UNFORMED, also without the module_mutex. Some additional code is called and then the module_mutex is reacquired to remove the module from the modules list: /* Now we can delete it from the lists */ mutex_lock(&module_mutex); stop_machine(__unlink_module, mod, NULL); mutex_unlock(&module_mutex); This is the sequence of events that leads to the panic. CPU 1 is removing dummy_module via delete_module(). It acquires the module_mutex, and then releases it. CPU 1 has NOT set dummy_module->state to MODULE_STATE_UNFORMED yet. CPU 0, which is reading the /proc/modules, acquires the module_mutex and acquires a pointer to the dummy_module which is still in the modules list. CPU 0 calls m_show for dummy_module. The check in m_show() for MODULE_STATE_UNFORMED passed for dummy_module even though it is being torn down. Meanwhile CPU 1, which has been continuing to remove dummy_module without holding the module_mutex, now calls free_module() and sets dummy_module->state to MODULE_STATE_UNFORMED. CPU 0 now calls module_flags() with dummy_module and ... static char *module_flags(struct module *mod, char *buf) { int bx = 0; BUG_ON(mod->state == MODULE_STATE_UNFORMED); and BOOM. Acquire and release the module_mutex lock around the setting of MODULE_STATE_UNFORMED in the teardown path, which should resolve the problem. Testing: In the unpatched kernel I can panic the system within 1 minute by doing while (true) do insmod dummy_module.ko; rmmod dummy_module.ko; done and while (true) do cat /proc/modules; done in separate terminals. In the patched kernel I was able to run just over one hour without seeing any issues. I also verified the output of panic via sysrq-c and the output of /proc/modules looks correct for all three states for the dummy_module. dummy_module 12661 0 - Unloading 0xffffffffa03a5000 (OE-) dummy_module 12661 0 - Live 0xffffffffa03bb000 (OE) dummy_module 14015 1 - Loading 0xffffffffa03a5000 (OE+) Signed-off-by: Prarit Bhargava <prarit@redhat.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit d3051b489aa81ca9ba62af366149ef42b8dae97c upstream.

A panic was seen in the following sitation.

There are two threads running on the system. The first thread is a system
monitoring thread that is reading /proc/modules. The second thread is
loading and unloading a module (in this example I'm using my simple
dummy-module.ko).  Note, in the "real world" this occurred with the qlogic
driver module.

When doing this, the following panic occurred:

 ------------[ cut here ]------------
 kernel BUG at kernel/module.c:3739!
 invalid opcode: 0000 [#1] SMP
 Modules linked in: binfmt_misc sg nfsv3 rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache intel_powerclamp coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel lrw igb gf128mul glue_helper iTCO_wdt iTCO_vendor_support ablk_helper ptp sb_edac cryptd pps_core edac_core shpchp i2c_i801 pcspkr wmi lpc_ich ioatdma mfd_core dca ipmi_si nfsd ipmi_msghandler auth_rpcgss nfs_acl lockd sunrpc xfs libcrc32c sr_mod cdrom sd_mod crc_t10dif crct10dif_common mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit drm_kms_helper ttm isci drm libsas ahci libahci scsi_transport_sas libata i2c_core dm_mirror dm_region_hash dm_log dm_mod [last unloaded: dummy_module]
 CPU: 37 PID: 186343 Comm: cat Tainted: GF          O--------------   3.10.0+ #7
 Hardware name: Intel Corporation S2600CP/S2600CP, BIOS RMLSDP.86I.00.29.D696.1311111329 11/11/2013
 task: ffff8807fd2d8000 ti: ffff88080fa7c000 task.ti: ffff88080fa7c000
 RIP: 0010:[<ffffffff810d64c5>]  [<ffffffff810d64c5>] module_flags+0xb5/0xc0
 RSP: 0018:ffff88080fa7fe18  EFLAGS: 00010246
 RAX: 0000000000000003 RBX: ffffffffa03b5200 RCX: 0000000000000000
 RDX: 0000000000001000 RSI: ffff88080fa7fe38 RDI: ffffffffa03b5000
 RBP: ffff88080fa7fe28 R08: 0000000000000010 R09: 0000000000000000
 R10: 0000000000000000 R11: 000000000000000f R12: ffffffffa03b5000
 R13: ffffffffa03b5008 R14: ffffffffa03b5200 R15: ffffffffa03b5000
 FS:  00007f6ae57ef740(0000) GS:ffff88101e7a0000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000404f70 CR3: 0000000ffed48000 CR4: 00000000001407e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
 Stack:
  ffffffffa03b5200 ffff8810101e4800 ffff88080fa7fe70 ffffffff810d666c
  ffff88081e807300 000000002e0f2fbf 0000000000000000 ffff88100f257b00
  ffffffffa03b5008 ffff88080fa7ff48 ffff8810101e4800 ffff88080fa7fee0
 Call Trace:
  [<ffffffff810d666c>] m_show+0x19c/0x1e0
  [<ffffffff811e4d7e>] seq_read+0x16e/0x3b0
  [<ffffffff812281ed>] proc_reg_read+0x3d/0x80
  [<ffffffff811c0f2c>] vfs_read+0x9c/0x170
  [<ffffffff811c1a58>] SyS_read+0x58/0xb0
  [<ffffffff81605829>] system_call_fastpath+0x16/0x1b
 Code: 48 63 c2 83 c2 01 c6 04 03 29 48 63 d2 eb d9 0f 1f 80 00 00 00 00 48 63 d2 c6 04 13 2d 41 8b 0c 24 8d 50 02 83 f9 01 75 b2 eb cb <0f> 0b 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41
 RIP  [<ffffffff810d64c5>] module_flags+0xb5/0xc0
  RSP <ffff88080fa7fe18>

    Consider the two processes running on the system.

    CPU 0 (/proc/modules reader)
    CPU 1 (loading/unloading module)

    CPU 0 opens /proc/modules, and starts displaying data for each module by
    traversing the modules list via fs/seq_file.c:seq_open() and
    fs/seq_file.c:seq_read().  For each module in the modules list, seq_read
    does

            op->start()  <-- this is a pointer to m_start()
            op->show()   <- this is a pointer to m_show()
            op->stop()   <-- this is a pointer to m_stop()

    The m_start(), m_show(), and m_stop() module functions are defined in
    kernel/module.c. The m_start() and m_stop() functions acquire and release
    the module_mutex respectively.

    ie) When reading /proc/modules, the module_mutex is acquired and released
    for each module.

    m_show() is called with the module_mutex held.  It accesses the module
    struct data and attempts to write out module data.  It is in this code
    path that the above BUG_ON() warning is encountered, specifically m_show()
    calls

    static char *module_flags(struct module *mod, char *buf)
    {
            int bx = 0;

            BUG_ON(mod->state == MODULE_STATE_UNFORMED);
    ...

    The other thread, CPU 1, in unloading the module calls the syscall
    delete_module() defined in kernel/module.c.  The module_mutex is acquired
    for a short time, and then released.  free_module() is called without the
    module_mutex.  free_module() then sets mod->state = MODULE_STATE_UNFORMED,
    also without the module_mutex.  Some additional code is called and then the
    module_mutex is reacquired to remove the module from the modules list:

        /* Now we can delete it from the lists */
        mutex_lock(&module_mutex);
        stop_machine(__unlink_module, mod, NULL);
        mutex_unlock(&module_mutex);

This is the sequence of events that leads to the panic.

CPU 1 is removing dummy_module via delete_module().  It acquires the
module_mutex, and then releases it.  CPU 1 has NOT set dummy_module->state to
MODULE_STATE_UNFORMED yet.

CPU 0, which is reading the /proc/modules, acquires the module_mutex and
acquires a pointer to the dummy_module which is still in the modules list.
CPU 0 calls m_show for dummy_module.  The check in m_show() for
MODULE_STATE_UNFORMED passed for dummy_module even though it is being
torn down.

Meanwhile CPU 1, which has been continuing to remove dummy_module without
holding the module_mutex, now calls free_module() and sets
dummy_module->state to MODULE_STATE_UNFORMED.

CPU 0 now calls module_flags() with dummy_module and ...

static char *module_flags(struct module *mod, char *buf)
{
        int bx = 0;

        BUG_ON(mod->state == MODULE_STATE_UNFORMED);

and BOOM.

Acquire and release the module_mutex lock around the setting of
MODULE_STATE_UNFORMED in the teardown path, which should resolve the
problem.

Testing: In the unpatched kernel I can panic the system within 1 minute by
doing

while (true) do insmod dummy_module.ko; rmmod dummy_module.ko; done

and

while (true) do cat /proc/modules; done

in separate terminals.

In the patched kernel I was able to run just over one hour without seeing
any issues.  I also verified the output of panic via sysrq-c and the output
of /proc/modules looks correct for all three states for the dummy_module.

        dummy_module 12661 0 - Unloading 0xffffffffa03a5000 (OE-)
        dummy_module 12661 0 - Live 0xffffffffa03bb000 (OE)
        dummy_module 14015 1 - Loading 0xffffffffa03a5000 (OE+)

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
tracing/syscalls: Ignore numbers outside NR_syscalls' range 2014-11-13T18:02:06+00:00 Rabin Vincent rabin@rab.in 2014-10-29T22:06:58+00:00 abc07cd01c51fb54088c6bc8ee654d104a5ec7d9 commit 086ba77a6db00ed858ff07451bedee197df868c9 upstream. ARM has some private syscalls (for example, set_tls(2)) which lie outside the range of NR_syscalls. If any of these are called while syscall tracing is being performed, out-of-bounds array access will occur in the ftrace and perf sys_{enter,exit} handlers. # trace-cmd record -e raw_syscalls:* true && trace-cmd report ... true-653 [000] 384.675777: sys_enter: NR 192 (0, 1000, 3, 4000022, ffffffff, 0) true-653 [000] 384.675812: sys_exit: NR 192 = 1995915264 true-653 [000] 384.675971: sys_enter: NR 983045 (76f74480, 76f74000, 76f74b28, 76f74480, 76f76f74, 1) true-653 [000] 384.675988: sys_exit: NR 983045 = 0 ... # trace-cmd record -e syscalls:* true [ 17.289329] Unable to handle kernel paging request at virtual address aaaaaace [ 17.289590] pgd = 9e71c000 [ 17.289696] [aaaaaace] *pgd=00000000 [ 17.289985] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [ 17.290169] Modules linked in: [ 17.290391] CPU: 0 PID: 704 Comm: true Not tainted 3.18.0-rc2+ #21 [ 17.290585] task: 9f4dab00 ti: 9e710000 task.ti: 9e710000 [ 17.290747] PC is at ftrace_syscall_enter+0x48/0x1f8 [ 17.290866] LR is at syscall_trace_enter+0x124/0x184 Fix this by ignoring out-of-NR_syscalls-bounds syscall numbers. Commit cd0980fc8add "tracing: Check invalid syscall nr while tracing syscalls" added the check for less than zero, but it should have also checked for greater than NR_syscalls. Link: http://lkml.kernel.org/p/1414620418-29472-1-git-send-email-rabin@rab.in Fixes: cd0980fc8add "tracing: Check invalid syscall nr while tracing syscalls" Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit 086ba77a6db00ed858ff07451bedee197df868c9 upstream.

ARM has some private syscalls (for example, set_tls(2)) which lie
outside the range of NR_syscalls.  If any of these are called while
syscall tracing is being performed, out-of-bounds array access will
occur in the ftrace and perf sys_{enter,exit} handlers.

 # trace-cmd record -e raw_syscalls:* true && trace-cmd report
 ...
 true-653   [000]   384.675777: sys_enter:            NR 192 (0, 1000, 3, 4000022, ffffffff, 0)
 true-653   [000]   384.675812: sys_exit:             NR 192 = 1995915264
 true-653   [000]   384.675971: sys_enter:            NR 983045 (76f74480, 76f74000, 76f74b28, 76f74480, 76f76f74, 1)
 true-653   [000]   384.675988: sys_exit:             NR 983045 = 0
 ...

 # trace-cmd record -e syscalls:* true
 [   17.289329] Unable to handle kernel paging request at virtual address aaaaaace
 [   17.289590] pgd = 9e71c000
 [   17.289696] [aaaaaace] *pgd=00000000
 [   17.289985] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
 [   17.290169] Modules linked in:
 [   17.290391] CPU: 0 PID: 704 Comm: true Not tainted 3.18.0-rc2+ #21
 [   17.290585] task: 9f4dab00 ti: 9e710000 task.ti: 9e710000
 [   17.290747] PC is at ftrace_syscall_enter+0x48/0x1f8
 [   17.290866] LR is at syscall_trace_enter+0x124/0x184

Fix this by ignoring out-of-NR_syscalls-bounds syscall numbers.

Commit cd0980fc8add "tracing: Check invalid syscall nr while tracing syscalls"
added the check for less than zero, but it should have also checked
for greater than NR_syscalls.

Link: http://lkml.kernel.org/p/1414620418-29472-1-git-send-email-rabin@rab.in

Fixes: cd0980fc8add "tracing: Check invalid syscall nr while tracing syscalls"
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
perf: Handle compat ioctl 2014-10-31T14:11:31+00:00 Pawel Moll pawel.moll@arm.com 2014-06-13T15:03:32+00:00 470023f49367ce285fc8c5644192e6ab6ea2772b commit b3f207855f57b9c8f43a547a801340bb5cbc59e5 upstream. When running a 32-bit userspace on a 64-bit kernel (eg. i386 application on x86_64 kernel or 32-bit arm userspace on arm64 kernel) some of the perf ioctls must be treated with special care, as they have a pointer size encoded in the command. For example, PERF_EVENT_IOC_ID in 32-bit world will be encoded as 0x80042407, but 64-bit kernel will expect 0x80082407. In result the ioctl will fail returning -ENOTTY. This patch solves the problem by adding code fixing up the size as compat_ioctl file operation. Reported-by: Drew Richardson <drew.richardson@arm.com> Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1402671812-9078-1-git-send-email-pawel.moll@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit b3f207855f57b9c8f43a547a801340bb5cbc59e5 upstream.

When running a 32-bit userspace on a 64-bit kernel (eg. i386
application on x86_64 kernel or 32-bit arm userspace on arm64
kernel) some of the perf ioctls must be treated with special
care, as they have a pointer size encoded in the command.

For example, PERF_EVENT_IOC_ID in 32-bit world will be encoded
as 0x80042407, but 64-bit kernel will expect 0x80082407. In
result the ioctl will fail returning -ENOTTY.

This patch solves the problem by adding code fixing up the
size as compat_ioctl file operation.

Reported-by: Drew Richardson <drew.richardson@arm.com>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1402671812-9078-1-git-send-email-pawel.moll@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>