linux-toradex.git/kernel, branch v3.14.52

perf: Fix PERF_EVENT_IOC_PERIOD migration race

2015-09-13T16:10:48+00:00

commit c7999c6f3fed9e383d3131474588f282ae6d56b9 upstream.

I ran the perf fuzzer, which triggered some WARN()s which are due to
trying to stop/restart an event on the wrong CPU.

Use the normal IPI pattern to ensure we run the code on the correct CPU.

Signed-off-by: Peter Zijlstra (Intel) 
Cc: Vince Weaver 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Fixes: bad7192b842c ("perf: Fix PERF_EVENT_IOC_PERIOD to force-reset the period")
Signed-off-by: Ingo Molnar 
Signed-off-by: Greg Kroah-Hartman

perf: Fix fasync handling on inherited events

2015-09-13T16:10:48+00:00

commit fed66e2cdd4f127a43fd11b8d92a99bdd429528c upstream.

Vince reported that the fasync signal stuff doesn't work proper for
inherited events. So fix that.

Installing fasync allocates memory and sets filp->f_flags |= FASYNC,
which upon the demise of the file descriptor ensures the allocation is
freed and state is updated.

Now for perf, we can have the events stick around for a while after the
original FD is dead because of references from child events. So we
cannot copy the fasync pointer around. We can however consistently use
the parent's fasync, as that will be updated.

Reported-and-Tested-by: Vince Weaver 
Signed-off-by: Peter Zijlstra (Intel) 
Cc: Arnaldo Carvalho deMelo 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1434011521.1495.71.camel@twins
Signed-off-by: Ingo Molnar 
Signed-off-by: Greg Kroah-Hartman

signal: fix information leak in copy_siginfo_from_user32

2015-08-17T03:51:52+00:00

commit 3c00cb5e68dc719f2fc73a33b1b230aadfcb1309 upstream.

This function can leak kernel stack data when the user siginfo_t has a
positive si_code value.  The top 16 bits of si_code descibe which fields
in the siginfo_t union are active, but they are treated inconsistently
between copy_siginfo_from_user32, copy_siginfo_to_user32 and
copy_siginfo_to_user.

copy_siginfo_from_user32 is called from rt_sigqueueinfo and
rt_tgsigqueueinfo in which the user has full control overthe top 16 bits
of si_code.

This fixes the following information leaks:
x86:   8 bytes leaked when sending a signal from a 32-bit process to
       itself. This leak grows to 16 bytes if the process uses x32.
       (si_code = __SI_CHLD)
x86:   100 bytes leaked when sending a signal from a 32-bit process to
       a 64-bit process. (si_code = -1)
sparc: 4 bytes leaked when sending a signal from a 32-bit process to a
       64-bit process. (si_code = any)

parsic and s390 have similar bugs, but they are not vulnerable because
rt_[tg]sigqueueinfo have checks that prevent sending a positive si_code
to a different process.  These bugs are also fixed for consistency.

Signed-off-by: Amanieu d'Antras 
Cc: Oleg Nesterov 
Cc: Ingo Molnar 
Cc: Russell King 
Cc: Ralf Baechle 
Cc: Benjamin Herrenschmidt 
Cc: Chris Metcalf 
Cc: Paul Mackerras 
Cc: Michael Ellerman 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

signal: fix information leak in copy_siginfo_to_user

2015-08-17T03:51:51+00:00

commit 26135022f85105ad725cda103fa069e29e83bd16 upstream.

This function may copy the si_addr_lsb, si_lower and si_upper fields to
user mode when they haven't been initialized, which can leak kernel
stack data to user mode.

Just checking the value of si_code is insufficient because the same
si_code value is shared between multiple signals.  This is solved by
checking the value of si_signo in addition to si_code.

Signed-off-by: Amanieu d'Antras 
Cc: Oleg Nesterov 
Cc: Ingo Molnar 
Cc: Russell King 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

genirq: Prevent resend to interrupts marked IRQ_NESTED_THREAD

2015-08-10T19:21:04+00:00

commit 75a06189fc508a2acf470b0b12710362ffb2c4b1 upstream.

The resend mechanism happily calls the interrupt handler of interrupts
which are marked IRQ_NESTED_THREAD from softirq context. This can
result in crashes because the interrupt handler is not the proper way
to invoke the device handlers. They must be invoked via
handle_nested_irq.

Prevent the resend even if the interrupt has no valid parent irq
set. Its better to have a lost interrupt than a crashing machine.

Reported-by: Uwe Kleine-König 
Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

security_syslog() should be called once only

2015-08-03T16:29:58+00:00

commit d194e5d666225b04c7754471df0948f645b6ab3a upstream.

The final version of commit 637241a900cb ("kmsg: honor dmesg_restrict
sysctl on /dev/kmsg") lost few hooks, as result security_syslog() are
processed incorrectly:

- open of /dev/kmsg checks syslog access permissions by using
  check_syslog_permissions() where security_syslog() is not called if
  dmesg_restrict is set.

- syslog syscall and /proc/kmsg calls do_syslog() where security_syslog
  can be executed twice (inside check_syslog_permissions() and then
  directly in do_syslog())

With this patch security_syslog() is called once only in all
syslog-related operations regardless of dmesg_restrict value.

Fixes: 637241a900cb ("kmsg: honor dmesg_restrict sysctl on /dev/kmsg")
Signed-off-by: Vasily Averin 
Cc: Kees Cook 
Cc: Josh Boyer 
Cc: Eric Paris 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

PM / sleep: Increase default DPM watchdog timeout to 60

2015-08-03T16:29:57+00:00

commit fff3b16d2754a061a3549c4307a186423a0128fd upstream.

Many harddisks (mostly WD ones) have firmware problems and take too
long, more than 10 seconds, to resume from suspend.  And this often
exceeds the default DPM watchdog timeout (12 seconds), resulting in a
kernel panic out of sudden.

Since most distros just take the default as is, we should give a bit
more safer value.  This patch increases the default value from 12
seconds to one minute, which has been confirmed to be long enough for
such problematic disks.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=91921
Fixes: 70fea60d888d (PM / Sleep: Detect device suspend/resume lockup and log event)
Signed-off-by: Takashi Iwai 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

tracing: Have branch tracer use recursive field of task struct

2015-08-03T16:29:57+00:00

commit 6224beb12e190ff11f3c7d4bf50cb2922878f600 upstream.

Fengguang Wu's tests triggered a bug in the branch tracer's start up
test when CONFIG_DEBUG_PREEMPT set. This was because that config
adds some debug logic in the per cpu field, which calls back into
the branch tracer.

The branch tracer has its own recursive checks, but uses a per cpu
variable to implement it. If retrieving the per cpu variable calls
back into the branch tracer, you can see how things will break.

Instead of using a per cpu variable, use the trace_recursion field
of the current task struct. Simply set a bit when entering the
branch tracing and clear it when leaving. If the bit is set on
entry, just don't do the tracing.

There's also the case with lockdep, as the local_irq_save() called
before the recursion can also trigger code that can call back into
the function. Changing that to a raw_local_irq_save() will protect
that as well.

This prevents the recursion and the inevitable crash that follows.

Link: http://lkml.kernel.org/r/20150630141803.GA28071@wfg-t540p.sh.intel.com

Reported-by: Fengguang Wu 
Tested-by: Fengguang Wu 
Signed-off-by: Steven Rostedt 
Signed-off-by: Greg Kroah-Hartman

tracing/filter: Do not allow infix to exceed end of string

2015-08-03T16:29:56+00:00

commit 6b88f44e161b9ee2a803e5b2b1fbcf4e20e8b980 upstream.

While debugging a WARN_ON() for filtering, I found that it is possible
for the filter string to be referenced after its end. With the filter:

 # echo '>' > /sys/kernel/debug/events/ext4/ext4_truncate_exit/filter

The filter_parse() function can call infix_get_op() which calls
infix_advance() that updates the infix filter pointers for the cnt
and tail without checking if the filter is already at the end, which
will put the cnt to zero and the tail beyond the end. The loop then calls
infix_next() that has

	ps->infix.cnt--;
	return ps->infix.string[ps->infix.tail++];

The cnt will now be below zero, and the tail that is returned is
already passed the end of the filter string. So far the allocation
of the filter string usually has some buffer that is zeroed out, but
if the filter string is of the exact size of the allocated buffer
there's no guarantee that the charater after the nul terminating
character will be zero.

Luckily, only root can write to the filter.

Signed-off-by: Steven Rostedt 
Signed-off-by: Greg Kroah-Hartman

tracing/filter: Do not WARN on operand count going below zero

2015-08-03T16:29:56+00:00

commit b4875bbe7e68f139bd3383828ae8e994a0df6d28 upstream.

When testing the fix for the trace filter, I could not come up with
a scenario where the operand count goes below zero, so I added a
WARN_ON_ONCE(cnt < 0) to the logic. But there is legitimate case
that it can happen (although the filter would be wrong).

 # echo '>' > /sys/kernel/debug/events/ext4/ext4_truncate_exit/filter

That is, a single operation without any operands will hit the path
where the WARN_ON_ONCE() can trigger. Although this is harmless,
and the filter is reported as a error. But instead of spitting out
a warning to the kernel dmesg, just fail nicely and report it via
the proper channels.

Link: http://lkml.kernel.org/r/558C6082.90608@oracle.com

Reported-by: Vince Weaver 
Reported-by: Sasha Levin 
Signed-off-by: Steven Rostedt 
Signed-off-by: Greg Kroah-Hartman