linux-toradex.git/kernel, branch v3.2.42

kernel/signal.c: use __ARCH_HAS_SA_RESTORER instead of SA_RESTORER

2013-03-27T02:41:25+00:00

commit 522cff142d7d2f9230839c9e1f21a4d8bcc22a4a upstream.

__ARCH_HAS_SA_RESTORER is the preferred conditional for use in 3.9 and
later kernels, per Kees.

Cc: Emese Revfy 
Cc: Emese Revfy 
Cc: PaX Team 
Cc: Al Viro 
Cc: Oleg Nesterov 
Cc: "Eric W. Biederman" 
Cc: Serge Hallyn 
Cc: Julien Tinnes 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Ben Hutchings

tracing: Prevent buffer overwrite disabled for latency tracers

2013-03-27T02:41:15+00:00

commit 613f04a0f51e6e68ac6fe571ab79da3c0a5eb4da upstream.

The latency tracers require the buffers to be in overwrite mode,
otherwise they get screwed up. Force the buffers to stay in overwrite
mode when latency tracers are enabled.

Added a flag_changed() method to the tracer structure to allow
the tracers to see what flags are being changed, and also be able
to prevent the change from happing.

Signed-off-by: Steven Rostedt 
[bwh: Backported to 3.2:
 - Adjust context
 - Drop some changes that are not needed because trace_set_options() is not
   separate from tracing_trace_options_write()]
Signed-off-by: Ben Hutchings

tracing: Keep overwrite in sync between regular and snapshot buffers

2013-03-27T02:41:14+00:00

commit 80902822658aab18330569587cdb69ac1dfdcea8 upstream.

Changing the overwrite mode for the ring buffer via the trace
option only sets the normal buffer. But the snapshot buffer could
swap with it, and then the snapshot would be in non overwrite mode
and the normal buffer would be in overwrite mode, even though the
option flag states otherwise.

Keep the two buffers overwrite modes in sync.

Signed-off-by: Steven Rostedt 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

tracing: Protect tracer flags with trace_types_lock

2013-03-27T02:41:14+00:00

commit 69d34da2984c95b33ea21518227e1f9470f11d95 upstream.

Seems that the tracer flags have never been protected from
synchronous writes. Luckily, admins don't usually modify the
tracing flags via two different tasks. But if scripts were to
be used to modify them, then they could get corrupted.

Move the trace_types_lock that protects against tracers changing
to also protect the flags being set.

Signed-off-by: Steven Rostedt 
[bwh: Backported to 3.2: also move failure return in
 tracing_trace_options_write() after unlocking]
Signed-off-by: Ben Hutchings

tracing: Fix free of probe entry by calling call_rcu_sched()

2013-03-27T02:41:14+00:00

commit 740466bc89ad8bd5afcc8de220f715f62b21e365 upstream.

Because function tracing is very invasive, and can even trace
calls to rcu_read_lock(), RCU access in function tracing is done
with preempt_disable_notrace(). This requires a synchronize_sched()
for updates and not a synchronize_rcu().

Function probes (traceon, traceoff, etc) must be freed after
a synchronize_sched() after its entry has been removed from the
hash. But call_rcu() is used. Fix this by using call_rcu_sched().

Also fix the usage to use hlist_del_rcu() instead of hlist_del().

Cc: Paul McKenney 
Signed-off-by: Steven Rostedt 
Signed-off-by: Ben Hutchings

tracing: Fix race in snapshot swapping

2013-03-27T02:41:12+00:00

commit 2721e72dd10f71a3ba90f59781becf02638aa0d9 upstream.

Although the swap is wrapped with a spin_lock, the assignment
of the temp buffer used to swap is not within that lock.
It needs to be moved into that lock, otherwise two swaps
happening on two different CPUs, can end up using the wrong
temp buffer to assign in the swap.

Luckily, all current callers of the swap function appear to have
their own locks. But in case something is added that allows two
different callers to call the swap, then there's a chance that
this race can trigger and corrupt the buffers.

New code is coming soon that will allow for this race to trigger.

I've Cc'd stable, so this bug will not show up if someone backports
one of the changes that can trigger this bug.

Signed-off-by: Steven Rostedt 
Signed-off-by: Ben Hutchings

signal: always clear sa_restorer on execve

2013-03-20T15:03:36+00:00

commit 2ca39528c01a933f6689cd6505ce65bd6d68a530 upstream.

When the new signal handlers are set up, the location of sa_restorer is
not cleared, leaking a parent process's address space location to
children.  This allows for a potential bypass of the parent's ASLR by
examining the sa_restorer value returned when calling sigaction().

Based on what should be considered "secret" about addresses, it only
matters across the exec not the fork (since the VMAs haven't changed
until the exec).  But since exec sets SIG_DFL and keeps sa_restorer,
this is where it should be fixed.

Given the few uses of sa_restorer, a "set" function was not written
since this would be the only use.  Instead, we use
__ARCH_HAS_SA_RESTORER, as already done in other places.

Example of the leak before applying this patch:

  $ cat /proc/$$/maps
  ...
  7fb9f3083000-7fb9f3238000 r-xp 00000000 fd:01 404469 .../libc-2.15.so
  ...
  $ ./leak
  ...
  7f278bc74000-7f278be29000 r-xp 00000000 fd:01 404469 .../libc-2.15.so
  ...
  1 0 (nil) 0x7fb9f30b94a0
  2 4000000 (nil) 0x7f278bcaa4a0
  3 4000000 (nil) 0x7f278bcaa4a0
  4 0 (nil) 0x7fb9f30b94a0
  ...

[akpm@linux-foundation.org: use SA_RESTORER for backportability]
Signed-off-by: Kees Cook 
Reported-by: Emese Revfy 
Cc: Emese Revfy 
Cc: PaX Team 
Cc: Al Viro 
Cc: Oleg Nesterov 
Cc: "Eric W. Biederman" 
Cc: Serge Hallyn 
Cc: Julien Tinnes 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Ben Hutchings

ftrace: Update the kconfig for DYNAMIC_FTRACE

2013-03-20T15:03:28+00:00

commit db05021d49a994ee40a9735d9c3cb0060c9babb8 upstream.

The prompt to enable DYNAMIC_FTRACE (the ability to nop and
enable function tracing at run time) had a confusing statement:

 "enable/disable ftrace tracepoints dynamically"

This was written before tracepoints were added to the kernel,
but now that tracepoints have been added, this is very confusing
and has confused people enough to give wrong information during
presentations.

Not only that, I looked at the help text, and it still references
that dreaded daemon that use to wake up once a second to update
the nop locations and brick NICs, that hasn't been around for over
five years.

Time to bring the text up to the current decade.

Reported-by: Ezequiel Garcia 
Signed-off-by: Steven Rostedt 
Signed-off-by: Ben Hutchings

kmod: make __request_module() killable

2013-03-06T03:24:28+00:00

commit 1cc684ab75123efe7ff446eb821d44375ba8fa30 upstream.

As Tetsuo Handa pointed out, request_module() can stress the system
while the oom-killed caller sleeps in TASK_UNINTERRUPTIBLE.

The task T uses "almost all" memory, then it does something which
triggers request_module().  Say, it can simply call sys_socket().  This
in turn needs more memory and leads to OOM.  oom-killer correctly
chooses T and kills it, but this can't help because it sleeps in
TASK_UNINTERRUPTIBLE and after that oom-killer becomes "disabled" by the
TIF_MEMDIE task T.

Make __request_module() killable.  The only necessary change is that
call_modprobe() should kmalloc argv and module_name, they can't live in
the stack if we use UMH_KILLABLE.  This memory is freed via
call_usermodehelper_freeinfo()->cleanup.

Reported-by: Tetsuo Handa 
Signed-off-by: Oleg Nesterov 
Cc: Rusty Russell 
Cc: Tejun Heo 
Cc: David Rientjes 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Ben Hutchings

kmod: introduce call_modprobe() helper

2013-03-06T03:24:28+00:00

commit 3e63a93b987685f02421e18b2aa452d20553a88b upstream.

No functional changes.  Move the call_usermodehelper code from
__request_module() into the new simple helper, call_modprobe().

Signed-off-by: Oleg Nesterov 
Cc: Tetsuo Handa 
Cc: Rusty Russell 
Cc: Tejun Heo 
Cc: David Rientjes 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Ben Hutchings