linux-toradex.git/kernel, branch v3.4.83

cgroup: cgroup_subsys->fork() should be called after the task is added to css_set

2014-03-11T23:10:03+00:00

commit 5edee61edeaaebafe584f8fb7074c1ef4658596b upstream.

cgroup core has a bug which violates a basic rule about event
notifications - when a new entity needs to be added, you add that to
the notification list first and then make the new entity conform to
the current state.  If done in the reverse order, an event happening
inbetween will be lost.

cgroup_subsys->fork() is invoked way before the new task is added to
the css_set.  Currently, cgroup_freezer is the only user of ->fork()
and uses it to make new tasks conform to the current state of the
freezer.  If FROZEN state is requested while fork is in progress
between cgroup_fork_callbacks() and cgroup_post_fork(), the child
could escape freezing - the cgroup isn't frozen when ->fork() is
called and the freezer couldn't see the new task on the css_set.

This patch moves cgroup_subsys->fork() invocation to
cgroup_post_fork() after the new task is added to the css_set.
cgroup_fork_callbacks() is removed.

Because now a task may be migrated during cgroup_subsys->fork(),
freezer_fork() is updated so that it adheres to the usual RCU locking
and the rather pointless comment on why locking can be different there
is removed (if it doesn't make anything simpler, why even bother?).

Signed-off-by: Tejun Heo 
Cc: Oleg Nesterov 
Cc: Rafael J. Wysocki 
[hq: Backported to 3.4:
 - Adjust context
 - Iterate over first CGROUP_BUILTIN_SUBSYS_COUNT elements of subsys]
Signed-off-by: Qiang Huang 
Signed-off-by: Greg Kroah-Hartman

perf: Fix hotplug splat

2014-03-11T23:10:02+00:00

commit e3703f8cdfcf39c25c4338c3ad8e68891cca3731 upstream.

Drew Richardson reported that he could make the kernel go *boom* when hotplugging
while having perf events active.

It turned out that when you have a group event, the code in
__perf_event_exit_context() fails to remove the group siblings from
the context.

We then proceed with destroying and freeing the event, and when you
re-plug the CPU and try and add another event to that CPU, things go
*boom* because you've still got dead entries there.

Reported-by: Drew Richardson 
Signed-off-by: Peter Zijlstra 
Cc: Will Deacon 
Link: http://lkml.kernel.org/n/tip-k6v5wundvusvcseqj1si0oz0@git.kernel.org
Signed-off-by: Ingo Molnar 
Signed-off-by: Greg Kroah-Hartman

workqueue: ensure @task is valid across kthread_stop()

2014-03-11T23:10:02+00:00

commit 5bdfff96c69a4d5ab9c49e60abf9e070ecd2acbb upstream.

When a kworker should die, the kworkre is notified through WORKER_DIE
flag instead of kthread_should_stop().  This, IIRC, is primarily to
keep the test synchronized inside worker_pool lock.  WORKER_DIE is
first set while holding pool->lock, the lock is dropped and
kthread_stop() is called.

Unfortunately, this means that there's a slight chance that the target
kworker may see WORKER_DIE before kthread_stop() finishes and exits
and frees the target task before or during kthread_stop().

Fix it by pinning the target task before setting WORKER_DIE and
putting it after kthread_stop() is done.

tj: Improved patch description and comment.  Moved pinning above
    WORKER_DIE for better signify what it's protecting.

Signed-off-by: Lai Jiangshan 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

genirq: Add missing irq_to_desc export for CONFIG_SPARSE_IRQ=n

2014-02-22T18:32:46+00:00

commit 2c45aada341121438affc4cb8d5b4cfaa2813d3d upstream.

In allmodconfig builds for sparc and any other arch which does
not set CONFIG_SPARSE_IRQ, the following will be seen at modpost:

  CC [M]  lib/cpu-notifier-error-inject.o
  CC [M]  lib/pm-notifier-error-inject.o
ERROR: "irq_to_desc" [drivers/gpio/gpio-mcp23s08.ko] undefined!
make[2]: *** [__modpost] Error 1

This happens because commit 3911ff30f5 ("genirq: export
handle_edge_irq() and irq_to_desc()") added one export for it, but
there were actually two instances of it, in an if/else clause for
CONFIG_SPARSE_IRQ.  Add the second one.

Signed-off-by: Paul Gortmaker 
Cc: Jiri Kosina 
Link: http://lkml.kernel.org/r/1392057610-11514-1-git-send-email-paul.gortmaker@windriver.com
Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

ring-buffer: Fix first commit on sub-buffer having non-zero delta

2014-02-22T18:32:46+00:00

commit d651aa1d68a2f0a7ee65697b04c6a92f8c0a12f2 upstream.

Each sub-buffer (buffer page) has a full 64 bit timestamp. The events on
that page use a 27 bit delta against that timestamp in order to save on
bits written to the ring buffer. If the time between events is larger than
what the 27 bits can hold, a "time extend" event is added to hold the
entire 64 bit timestamp again and the events after that hold a delta from
that timestamp.

As a "time extend" is always paired with an event, it is logical to just
allocate the event with the time extend, to make things a bit more efficient.

Unfortunately, when the pairing code was written, it removed the "delta = 0"
from the first commit on a page, causing the events on the page to be
slightly skewed.

Fixes: 69d1b839f7ee "ring-buffer: Bind time extend and data events together"
Signed-off-by: Steven Rostedt 
Signed-off-by: Greg Kroah-Hartman

time: Fix overflow when HZ is smaller than 60

2014-02-22T18:32:46+00:00

commit 80d767d770fd9c697e434fd080c2db7b5c60c6dd upstream.

When compiling for the IA-64 ski emulator, HZ is set to 32 because the
emulation is slow and we don't want to waste too many cycles processing
timers. Alpha also has an option to set HZ to 32.

This causes integer underflow in
kernel/time/jiffies.c:
kernel/time/jiffies.c:66:2: warning: large integer implicitly truncated to unsigned type [-Woverflow]
  .mult  = NSEC_PER_JIFFY << JIFFIES_SHIFT, /* details above */
  ^

This patch reduces the JIFFIES_SHIFT value to avoid the overflow.

Signed-off-by: Mikulas Patocka 
Link: http://lkml.kernel.org/r/alpine.LRH.2.02.1401241639100.23871@file01.intranet.prod.int.rdu2.redhat.com
Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

PM / Hibernate: Hibernate/thaw fixes/improvements

2014-02-20T18:45:33+00:00

commit 5a21d489fd9541a4a66b9a500659abaca1b19a51 upstream.

 1. Do not allocate memory for buffers from emergency pools, unless
    absolutely required. Do not warn about and do not retry non-essential
    failed allocations.

 2. Do not check the amount of free pages left on every single page
    write, but wait until one map is completely populated and then check.

 3. Set maximum number of pages for read buffering consistently, instead
    of inadvertently depending on the size of the sector type.

 4. Fix copyright line, which I missed when I submitted the hibernation
    threading patch.

 5. Dispense with bit shifting arithmetic to improve readability.

 6. Really recalculate the number of pages required to be free after all
    allocations have been done.

 7. Fix calculation of pages required for read buffering. Only count in
    pages that do not belong to high memory.

Signed-off-by: Bojan Smojver 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Ben Hutchings 
Cc: Li Zefan 
Signed-off-by: Greg Kroah-Hartman

sched/nohz: Fix rq->cpu_load calculations some more

2014-02-20T18:45:32+00:00

commit 5aaa0b7a2ed5b12692c9ffb5222182bd558d3146 upstream.

Follow up on commit 556061b00 ("sched/nohz: Fix rq->cpu_load[]
calculations") since while that fixed the busy case it regressed the
mostly idle case.

Add a callback from the nohz exit to also age the rq->cpu_load[]
array. This closes the hole where either there was no nohz load
balance pass during the nohz, or there was a 'significant' amount of
idle time between the last nohz balance and the nohz exit.

So we'll update unconditionally from the tick to not insert any
accidental 0 load periods while busy, and we try and catch up from
nohz idle balance and nohz exit. Both these are still prone to missing
a jiffy, but that has always been the case.

Signed-off-by: Peter Zijlstra 
Cc: pjt@google.com
Cc: Venkatesh Pallipadi 
Link: http://lkml.kernel.org/n/tip-kt0trz0apodbf84ucjfdbr1a@git.kernel.org
Signed-off-by: Ingo Molnar 
Cc: Li Zefan 
Signed-off-by: Greg Kroah-Hartman

sched/nohz: Fix rq->cpu_load[] calculations

2014-02-20T18:45:32+00:00

commit 556061b00c9f2fd6a5524b6bde823ef12f299ecf upstream.

While investigating why the load-balancer did funny I found that the
rq->cpu_load[] tables were completely screwy.. a bit more digging
revealed that the updates that got through were missing ticks followed
by a catchup of 2 ticks.

The catchup assumes the cpu was idle during that time (since only nohz
can cause missed ticks and the machine is idle etc..) this means that
esp. the higher indices were significantly lower than they ought to
be.

The reason for this is that its not correct to compare against jiffies
on every jiffy on any other cpu than the cpu that updates jiffies.

This patch cludges around it by only doing the catch-up stuff from
nohz_idle_balance() and doing the regular stuff unconditionally from
the tick.

Signed-off-by: Peter Zijlstra 
Cc: pjt@google.com
Cc: Venkatesh Pallipadi 
Link: http://lkml.kernel.org/n/tip-tp4kj18xdd5aj4vvj0qg55s2@git.kernel.org
Signed-off-by: Ingo Molnar 
Cc: Li Zefan 
Signed-off-by: Greg Kroah-Hartman

ftrace: Have function graph only trace based on global_ops filters

2014-02-20T18:45:32+00:00

commit 23a8e8441a0a74dd612edf81dc89d1600bc0a3d1 upstream.

Doing some different tests, I discovered that function graph tracing, when
filtered via the set_ftrace_filter and set_ftrace_notrace files, does
not always keep with them if another function ftrace_ops is registered
to trace functions.

The reason is that function graph just happens to trace all functions
that the function tracer enables. When there was only one user of
function tracing, the function graph tracer did not need to worry about
being called by functions that it did not want to trace. But now that there
are other users, this becomes a problem.

For example, one just needs to do the following:

 # cd /sys/kernel/debug/tracing
 # echo schedule > set_ftrace_filter
 # echo function_graph > current_tracer
 # cat trace
[..]
 0)               |  schedule() {
 ------------------------------------------
 0)    -0    =>   rcu_pre-7
 ------------------------------------------

 0) ! 2980.314 us |  }
 0)               |  schedule() {
 ------------------------------------------
 0)   rcu_pre-7    =>    -0
 ------------------------------------------

 0) + 20.701 us   |  }

 # echo 1 > /proc/sys/kernel/stack_tracer_enabled
 # cat trace
[..]
 1) + 20.825 us   |      }
 1) + 21.651 us   |    }
 1) + 30.924 us   |  } /* SyS_ioctl */
 1)               |  do_page_fault() {
 1)               |    __do_page_fault() {
 1)   0.274 us    |      down_read_trylock();
 1)   0.098 us    |      find_vma();
 1)               |      handle_mm_fault() {
 1)               |        _raw_spin_lock() {
 1)   0.102 us    |          preempt_count_add();
 1)   0.097 us    |          do_raw_spin_lock();
 1)   2.173 us    |        }
 1)               |        do_wp_page() {
 1)   0.079 us    |          vm_normal_page();
 1)   0.086 us    |          reuse_swap_page();
 1)   0.076 us    |          page_move_anon_rmap();
 1)               |          unlock_page() {
 1)   0.082 us    |            page_waitqueue();
 1)   0.086 us    |            __wake_up_bit();
 1)   1.801 us    |          }
 1)   0.075 us    |          ptep_set_access_flags();
 1)               |          _raw_spin_unlock() {
 1)   0.098 us    |            do_raw_spin_unlock();
 1)   0.105 us    |            preempt_count_sub();
 1)   1.884 us    |          }
 1)   9.149 us    |        }
 1) + 13.083 us   |      }
 1)   0.146 us    |      up_read();

When the stack tracer was enabled, it enabled all functions to be traced, which
now the function graph tracer also traces. This is a side effect that should
not occur.

To fix this a test is added when the function tracing is changed, as well as when
the graph tracer is enabled, to see if anything other than the ftrace global_ops
function tracer is enabled. If so, then the graph tracer calls a test trampoline
that will look at the function that is being traced and compare it with the
filters defined by the global_ops.

As an optimization, if there's no other function tracers registered, or if
the only registered function tracers also use the global ops, the function
graph infrastructure will call the registered function graph callback directly
and not go through the test trampoline.

Fixes: d2d45c7a03a2 "tracing: Have stack_tracer use a separate list of functions"
Signed-off-by: Steven Rostedt 
Signed-off-by: Greg Kroah-Hartman