Pull perf fixes from Ingo Molnar. * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: watchdog: Quiet down the boot messages perf/x86: Fix broken LBR fixup code tracing: Have tracing_off() actually turn tracing off
Pull core updates (RCU and locking) from Ingo Molnar:
"Most of the diffstat comes from the RCU slow boot regression fixes,
but there's also a debuggability improvements/fixes."
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
memblock: Document memblock_is_region_{memory,reserved}()
rcu: Precompute RCU_FAST_NO_HZ timer offsets
rcu: Move RCU_FAST_NO_HZ per-CPU variables to rcu_dynticks structure
rcu: Update RCU_FAST_NO_HZ tracing for lazy callbacks
rcu: RCU_FAST_NO_HZ detection of callback adoption
spinlock: Indicate that a lockup is only suspected
kdump: Execute kmsg_dump(KMSG_DUMP_PANIC) after smp_send_stop()
panic: Make panic_on_oops configurable
A bunch of bugzillas have complained how noisy the nmi_watchdog
is during boot-up especially with its expected failure cases
(like virt and bios resource contention).
This is my attempt to quiet them down and keep it less confusing
for the end user. What I did is print the message for cpu0 and
save it for future comparisons. If future cpus have an
identical message as cpu0, then don't print the redundant info.
However, if a future cpu has a different message, happily print
that loudly.
Before the change, you would see something like:
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 0a
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
NMI watchdog enabled, takes one hw-pmu counter.
#2
NMI watchdog enabled, takes one hw-pmu counter.
#3 Ok.
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 4 CPUs
Total of 4 processors activated (22607.24 BogoMIPS).
After the change, it is simplified to:
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 0a
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Booting Node 0, Processors #1 #2 #3 Ok.
Brought up 4 CPUs
V2: little changes based on Joe Perches' feedback
V3: printk cleanup based on Ingo's feedback; checkpatch fix
V4: keep printk as one long line
V5: Ingo fix ups
Reported-and-tested-by: Nathan Zimmer <nzimmer@sgi.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: nzimmer@sgi.com
Cc: joe@perches.com
Link: http://lkml.kernel.org/r/1339594548-17227-1-git-send-email-dzickus@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Merge RCU fixes from Paul E. McKenney: " This series has four patches, the major point of which is to eliminate some slowdowns (including boot-time slowdowns) resulting from some RCU_FAST_NO_HZ changes. The issue with the changes is that posting timers from the idle loop has no effect if the CPU has entered dyntick-idle mode because the CPU has already computed its wakeup time, and posting a timer does not cause it to be recomputed. The short-term fix is for RCU to precompute the timeout value so that the CPU's calculation is correct. " Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull scheduler fixes from Ingo Molnar. * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix the relax_domain_level boot parameter sched: Validate assumptions in sched_init_numa() sched: Always initialize cpu-power sched: Fix domain iteration sched/rt: Fix lockdep annotation within find_lock_lowest_rq() sched/numa: Load balance between remote nodes sched/x86: Calculate booted cores after construction of sibling_mask
Fix lots of new kernel-doc warnings in kernel/sched/fair.c: Warning(kernel/sched/fair.c:3625): No description found for parameter 'env' Warning(kernel/sched/fair.c:3625): Excess function parameter 'sd' description in 'update_sg_lb_stats' Warning(kernel/sched/fair.c:3735): No description found for parameter 'env' Warning(kernel/sched/fair.c:3735): Excess function parameter 'sd' description in 'update_sd_pick_busiest' Warning(kernel/sched/fair.c:3735): Excess function parameter 'this_cpu' description in 'update_sd_pick_busiest' .. more warnings Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull perf fixes from Ingo Molnar: "A bit larger than what I'd wish for - half of it is due to hw driver updates to Intel Ivy-Bridge which info got recently released, cycles:pp should work there now too, amongst other things. (but we are generally making exceptions for hardware enablement of this type.) There are also callchain fixes in it - responding to mostly theoretical (but valid) concerns. The tooling side sports perf.data endianness/portability fixes which did not make it for the merge window - and various other fixes as well." * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits) perf/x86: Check user address explicitly in copy_from_user_nmi() perf/x86: Check if user fp is valid perf: Limit callchains to 127 perf/x86: Allow multiple stacks perf/x86: Update SNB PEBS constraints perf/x86: Enable/Add IvyBridge hardware support perf/x86: Implement cycles:p for SNB/IVB perf/x86: Fix Intel shared extra MSR allocation x86/decoder: Fix bsr/bsf/jmpe decoding with operand-size prefix perf: Remove duplicate invocation on perf_event_for_each perf uprobes: Remove unnecessary check before strlist__delete perf symbols: Check for valid dso before creating map perf evsel: Fix 32 bit values endianity swap for sample_id_all header perf session: Handle endianity swap on sample_id_all header data perf symbols: Handle different endians properly during symbol load perf evlist: Pass third argument to ioctl explicitly perf tools: Update ioctl documentation for PERF_IOC_FLAG_GROUP perf tools: Make --version show kernel version instead of pull req tag perf tools: Check if callchain is corrupted perf callchain: Make callchain cursors TLS ...
Pull leap second timer fix from Thomas Gleixner. * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Fix CLOCK_MONOTONIC inconsistency during leapsecond
Pull brown paper bag fix from Steve Rostedt. Signed-off-by: Ingo Molnar <mingo@kernel.org>
This reverts commit 40af1bbdca47e5c8a2044039bb78ca8fd8b20f94. It's horribly and utterly broken for at least the following reasons: - calling sync_mm_rss() from mmput() is fundamentally wrong, because there's absolutely no reason to believe that the task that does the mmput() always does it on its own VM. Example: fork, ptrace, /proc - you name it. - calling it *after* having done mmdrop() on it is doubly insane, since the mm struct may well be gone now. - testing mm against NULL before you call it is insane too, since a NULL mm there would have caused oopses long before. .. and those are just the three bugs I found before I decided to give up looking for me and revert it asap. I should have caught it before I even took it, but I trusted Andrew too much. Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: Hugh Dickins <hughd@google.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>