linux-toradex.git/kernel, branch v4.4.153

tracing: Use __printf markup to silence compiler

2018-08-24T11:26:58+00:00

[ Upstream commit 26b68dd2f48fe7699a89f0cfbb9f4a650dc1c837 ]

Silence warnings (triggered at W=1) by adding relevant __printf attributes.

  CC      kernel/trace/trace.o
kernel/trace/trace.c: In function ‘__trace_array_vprintk’:
kernel/trace/trace.c:2979:2: warning: function might be possible candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
  len = vscnprintf(tbuffer, TRACE_BUF_SIZE, fmt, args);
  ^~~
  AR      kernel/trace/built-in.o

Link: http://lkml.kernel.org/r/20180308205843.27447-1-malat@debian.org

Signed-off-by: Mathieu Malaterre 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

locking/lockdep: Do not record IRQ state within lockdep code

2018-08-24T11:26:55+00:00

[ Upstream commit fcc784be837714a9173b372ff9fb9b514590dad9 ]

While debugging where things were going wrong with mapping
enabling/disabling interrupts with the lockdep state and actual real
enabling and disabling interrupts, I had to silent the IRQ
disabling/enabling in debug_check_no_locks_freed() because it was
always showing up as it was called before the splat was.

Use raw_local_irq_save/restore() for not only debug_check_no_locks_freed()
but for all internal lockdep functions, as they hide useful information
about where interrupts were used incorrectly last.

Signed-off-by: Steven Rostedt (VMware) 
Cc: Andrew Morton 
Cc: Linus Torvalds 
Cc: Paul E. McKenney 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: Will Deacon 
Link: https://lkml.kernel.org/lkml/20180404140630.3f4f4c7a@gandalf.local.home
Signed-off-by: Ingo Molnar 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ring_buffer: tracing: Inherit the tracing setting to next ring buffer

2018-08-09T10:19:28+00:00

commit 73c8d8945505acdcbae137c2e00a1232e0be709f upstream.

Maintain the tracing on/off setting of the ring_buffer when switching
to the trace buffer snapshot.

Taking a snapshot is done by swapping the backup ring buffer
(max_tr_buffer). But since the tracing on/off setting is defined
by the ring buffer, when swapping it, the tracing on/off setting
can also be changed. This causes a strange result like below:

  /sys/kernel/debug/tracing # cat tracing_on
  1
  /sys/kernel/debug/tracing # echo 0 > tracing_on
  /sys/kernel/debug/tracing # cat tracing_on
  0
  /sys/kernel/debug/tracing # echo 1 > snapshot
  /sys/kernel/debug/tracing # cat tracing_on
  1
  /sys/kernel/debug/tracing # echo 1 > snapshot
  /sys/kernel/debug/tracing # cat tracing_on
  0

We don't touch tracing_on, but snapshot changes tracing_on
setting each time. This is an anomaly, because user doesn't know
that each "ring_buffer" stores its own tracing-enable state and
the snapshot is done by swapping ring buffers.

Link: http://lkml.kernel.org/r/153149929558.11274.11730609978254724394.stgit@devbox

Cc: Ingo Molnar 
Cc: Shuah Khan 
Cc: Tom Zanussi 
Cc: Hiraku Toyooka 
Cc: stable@vger.kernel.org
Fixes: debdd57f5145 ("tracing: Make a snapshot feature available from userspace")
Signed-off-by: Masami Hiramatsu 
[ Updated commit log and comment in the code ]
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Sudip Mukherjee 
Signed-off-by: Greg Kroah-Hartman

nohz: Fix local_timer_softirq_pending()

2018-08-09T10:19:27+00:00

commit 80d20d35af1edd632a5e7a3b9c0ab7ceff92769e upstream.

local_timer_softirq_pending() checks whether the timer softirq is
pending with: local_softirq_pending() & TIMER_SOFTIRQ.

This is wrong because TIMER_SOFTIRQ is the softirq number and not a
bitmask. So the test checks for the wrong bit.

Use BIT(TIMER_SOFTIRQ) instead.

Fixes: 5d62c183f9e9 ("nohz: Prevent a timer interrupt storm in tick_nohz_stop_sched_tick()")
Signed-off-by: Anna-Maria Gleixner 
Signed-off-by: Thomas Gleixner 
Reviewed-by: Paul E. McKenney 
Reviewed-by: Daniel Bristot de Oliveira 
Acked-by: Frederic Weisbecker 
Cc: bigeasy@linutronix.de
Cc: peterz@infradead.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180731161358.29472-1-anna-maria@linutronix.de
Signed-off-by: Greg Kroah-Hartman

genirq: Make force irq threading setup more robust

2018-08-09T10:19:27+00:00

commit d1f0301b3333eef5efbfa1fe0f0edbea01863d5d upstream.

The support of force threading interrupts which are set up with both a
primary and a threaded handler wreckaged the setup of regular requested
threaded interrupts (primary handler == NULL).

The reason is that it does not check whether the primary handler is set to
the default handler which wakes the handler thread. Instead it replaces the
thread handler with the primary handler as it would do with force threaded
interrupts which have been requested via request_irq(). So both the primary
and the thread handler become the same which then triggers the warnon that
the thread handler tries to wakeup a not configured secondary thread.

Fortunately this only happens when the driver omits the IRQF_ONESHOT flag
when requesting the threaded interrupt, which is normaly caught by the
sanity checks when force irq threading is disabled.

Fix it by skipping the force threading setup when a regular threaded
interrupt is requested. As a consequence the interrupt request which lacks
the IRQ_ONESHOT flag is rejected correctly instead of silently wreckaging
it.

Fixes: 2a1d3ab8986d ("genirq: Handle force threading of irqs with primary and thread handler")
Reported-by: Kurt Kanzenbach 
Signed-off-by: Thomas Gleixner 
Tested-by: Kurt Kanzenbach 
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman

audit: allow not equal op for audit by executable

2018-08-06T14:24:38+00:00

[ Upstream commit 23bcc480dac204c7dbdf49d96b2c918ed98223c2 ]

Current implementation of auditing by executable name only implements
the 'equal' operator. This patch extends it to also support the 'not
equal' operator.

See: https://github.com/linux-audit/audit-kernel/issues/53

Signed-off-by: Ondrej Mosnacek 
Reviewed-by: Richard Guy Briggs 
Signed-off-by: Paul Moore 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

bpf: fix references to free_bpf_prog_info() in comments

2018-08-06T14:24:37+00:00

[ Upstream commit ab7f5bf0928be2f148d000a6eaa6c0a36e74750e ]

Comments in the verifier refer to free_bpf_prog_info() which
seems to have never existed in tree.  Replace it with
free_used_maps().

Signed-off-by: Jakub Kicinski 
Reviewed-by: Quentin Monnet 
Signed-off-by: Daniel Borkmann 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

tracing: Quiet gcc warning about maybe unused link variable

2018-08-06T14:24:30+00:00

commit 2519c1bbe38d7acacc9aacba303ca6f97482ed53 upstream.

Commit 57ea2a34adf4 ("tracing/kprobes: Fix trace_probe flags on
enable_trace_kprobe() failure") added an if statement that depends on another
if statement that gcc doesn't see will initialize the "link" variable and
gives the warning:

 "warning: 'link' may be used uninitialized in this function"

It is really a false positive, but to quiet the warning, and also to make
sure that it never actually is used uninitialized, initialize the "link"
variable to NULL and add an if (!WARN_ON_ONCE(!link)) where the compiler
thinks it could be used uninitialized.

Cc: stable@vger.kernel.org
Fixes: 57ea2a34adf4 ("tracing/kprobes: Fix trace_probe flags on enable_trace_kprobe() failure")
Reported-by: kbuild test robot 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman

tracing/kprobes: Fix trace_probe flags on enable_trace_kprobe() failure

2018-08-06T14:24:29+00:00

commit 57ea2a34adf40f3a6e88409aafcf803b8945619a upstream.

If enable_trace_kprobe fails to enable the probe in enable_k(ret)probe
it returns an error, but does not unset the tp flags it set previously.
This results in a probe being considered enabled and failures like being
unable to remove the probe through kprobe_events file since probes_open()
expects every probe to be disabled.

Link: http://lkml.kernel.org/r/20180725102826.8300-1-asavkov@redhat.com
Link: http://lkml.kernel.org/r/20180725142038.4765-1-asavkov@redhat.com

Cc: Ingo Molnar 
Cc: stable@vger.kernel.org
Fixes: 41a7dd420c57 ("tracing/kprobes: Support ftrace_event_file base multibuffer")
Acked-by: Masami Hiramatsu 
Reviewed-by: Josh Poimboeuf 
Signed-off-by: Artem Savkov 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman

tracing: Fix possible double free in event_enable_trigger_func()

2018-08-06T14:24:29+00:00

commit 15cc78644d0075e76d59476a4467e7143860f660 upstream.

There was a case that triggered a double free in event_trigger_callback()
due to the called reg() function freeing the trigger_data and then it
getting freed again by the error return by the caller. The solution there
was to up the trigger_data ref count.

Code inspection found that event_enable_trigger_func() has the same issue,
but is not as easy to trigger (requires harder to trigger failures). It
needs to be solved slightly different as it needs more to clean up when the
reg() function fails.

Link: http://lkml.kernel.org/r/20180725124008.7008e586@gandalf.local.home

Cc: stable@vger.kernel.org
Fixes: 7862ad1846e99 ("tracing: Add 'enable_event' and 'disable_event' event trigger commands")
Reivewed-by: Masami Hiramatsu 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman