linux-toradex.git/kernel, branch v4.4.74

alarmtimer: Rate limit periodic intervals

2017-06-26T05:13:11+00:00

commit ff86bf0c65f14346bf2440534f9ba5ac232c39a0 upstream.

The alarmtimer code has another source of potentially rearming itself too
fast. Interval timers with a very samll interval have a similar CPU hog
effect as the previously fixed overflow issue.

The reason is that alarmtimers do not implement the normal protection
against this kind of problem which the other posix timer use:

  timer expires -> queue signal -> deliver signal -> rearm timer

This scheme brings the rearming under scheduler control and prevents
permanently firing timers which hog the CPU.

Bringing this scheme to the alarm timer code is a major overhaul because it
lacks all the necessary mechanisms completely.

So for a quick fix limit the interval to one jiffie. This is not
problematic in practice as alarmtimers are usually backed by an RTC for
suspend which have 1 second resolution. It could be therefor argued that
the resolution of this clock should be set to 1 second in general, but
that's outside the scope of this fix.

Signed-off-by: Thomas Gleixner 
Cc: Peter Zijlstra 
Cc: Kostya Serebryany 
Cc: syzkaller 
Cc: John Stultz 
Cc: Dmitry Vyukov 
Link: http://lkml.kernel.org/r/20170530211655.896767100@linutronix.de
Signed-off-by: Greg Kroah-Hartman

alarmtimer: Prevent overflow of relative timers

2017-06-26T05:13:10+00:00

commit f4781e76f90df7aec400635d73ea4c35ee1d4765 upstream.

Andrey reported a alartimer related RCU stall while fuzzing the kernel with
syzkaller.

The reason for this is an overflow in ktime_add() which brings the
resulting time into negative space and causes immediate expiry of the
timer. The following rearm with a small interval does not bring the timer
back into positive space due to the same issue.

This results in a permanent firing alarmtimer which hogs the CPU.

Use ktime_add_safe() instead which detects the overflow and clamps the
result to KTIME_SEC_MAX.

Reported-by: Andrey Konovalov 
Signed-off-by: Thomas Gleixner 
Cc: Peter Zijlstra 
Cc: Kostya Serebryany 
Cc: syzkaller 
Cc: John Stultz 
Cc: Dmitry Vyukov 
Link: http://lkml.kernel.org/r/20170530211655.802921648@linutronix.de
Signed-off-by: Greg Kroah-Hartman

genirq: Release resources in __setup_irq() error path

2017-06-26T05:13:10+00:00

commit fa07ab72cbb0d843429e61bf179308aed6cbe0dd upstream.

In case __irq_set_trigger() fails the resources requested via
irq_request_resources() are not released.

Add the missing release call into the error handling path.

Fixes: c1bacbae8192 ("genirq: Provide irq_request/release_resources chip callbacks")
Signed-off-by: Heiner Kallweit 
Signed-off-by: Thomas Gleixner 
Link: http://lkml.kernel.org/r/655538f5-cb20-a892-ff15-fbd2dd1fa4ec@gmail.com
Signed-off-by: Greg Kroah-Hartman

perf/core: Drop kernel samples even though :u is specified

2017-06-14T11:16:25+00:00

commit cc1582c231ea041fbc68861dfaf957eaf902b829 upstream.

When doing sampling, for example:

  perf record -e cycles:u ...

On workloads that do a lot of kernel entry/exits we see kernel
samples, even though :u is specified. This is due to skid existing.

This might be a security issue because it can leak kernel addresses even
though kernel sampling support is disabled.

The patch drops the kernel samples if exclude_kernel is specified.

For example, test on Haswell desktop:

  perf record -e cycles:u 
  perf report --stdio

Before patch applied:

    99.77%  mgen     mgen              [.] buf_read
     0.20%  mgen     mgen              [.] rand_buf_init
     0.01%  mgen     [kernel.vmlinux]  [k] apic_timer_interrupt
     0.00%  mgen     mgen              [.] last_free_elem
     0.00%  mgen     libc-2.23.so      [.] __random_r
     0.00%  mgen     libc-2.23.so      [.] _int_malloc
     0.00%  mgen     mgen              [.] rand_array_init
     0.00%  mgen     [kernel.vmlinux]  [k] page_fault
     0.00%  mgen     libc-2.23.so      [.] __random
     0.00%  mgen     libc-2.23.so      [.] __strcasestr
     0.00%  mgen     ld-2.23.so        [.] strcmp
     0.00%  mgen     ld-2.23.so        [.] _dl_start
     0.00%  mgen     libc-2.23.so      [.] sched_setaffinity@@GLIBC_2.3.4
     0.00%  mgen     ld-2.23.so        [.] _start

We can see kernel symbols apic_timer_interrupt and page_fault.

After patch applied:

    99.79%  mgen     mgen           [.] buf_read
     0.19%  mgen     mgen           [.] rand_buf_init
     0.00%  mgen     libc-2.23.so   [.] __random_r
     0.00%  mgen     mgen           [.] rand_array_init
     0.00%  mgen     mgen           [.] last_free_elem
     0.00%  mgen     libc-2.23.so   [.] vfprintf
     0.00%  mgen     libc-2.23.so   [.] rand
     0.00%  mgen     libc-2.23.so   [.] __random
     0.00%  mgen     libc-2.23.so   [.] _int_malloc
     0.00%  mgen     libc-2.23.so   [.] _IO_doallocbuf
     0.00%  mgen     ld-2.23.so     [.] do_lookup_x
     0.00%  mgen     ld-2.23.so     [.] open_verify.constprop.7
     0.00%  mgen     ld-2.23.so     [.] _dl_important_hwcaps
     0.00%  mgen     libc-2.23.so   [.] sched_setaffinity@@GLIBC_2.3.4
     0.00%  mgen     ld-2.23.so     [.] _start

There are only userspace symbols.

Signed-off-by: Jin Yao 
Signed-off-by: Peter Zijlstra (Intel) 
Cc: Alexander Shishkin 
Cc: Arnaldo Carvalho de Melo 
Cc: Jiri Olsa 
Cc: Linus Torvalds 
Cc: Namhyung Kim 
Cc: Peter Zijlstra 
Cc: Stephane Eranian 
Cc: Thomas Gleixner 
Cc: Vince Weaver 
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Cc: kan.liang@intel.com
Cc: mark.rutland@arm.com
Cc: will.deacon@arm.com
Cc: yao.jin@intel.com
Link: http://lkml.kernel.org/r/1495706947-3744-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Ingo Molnar 
Signed-off-by: Greg Kroah-Hartman

cpuset: consider dying css as offline

2017-06-14T11:16:23+00:00

commit 41c25707d21716826e3c1f60967f5550610ec1c9 upstream.

In most cases, a cgroup controller don't care about the liftimes of
cgroups.  For the controller, a css becomes online when ->css_online()
is called on it and offline when ->css_offline() is called.

However, cpuset is special in that the user interface it exposes cares
whether certain cgroups exist or not.  Combined with the RCU delay
between cgroup removal and css offlining, this can lead to user
visible behavior oddities where operations which should succeed after
cgroup removals fail for some time period.  The effects of cgroup
removals are delayed when seen from userland.

This patch adds css_is_dying() which tests whether offline is pending
and updates is_cpuset_online() so that the function returns false also
while offline is pending.  This gets rid of the userland visible
delays.

Signed-off-by: Tejun Heo 
Reported-by: Daniel Jordan 
Link: http://lkml.kernel.org/r/327ca1f5-7957-fbb9-9e5f-9ba149d40ba2@oracle.com
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

stackprotector: Increase the per-task stack canary's random range from 32 bits to 64 bits on 64-bit platforms

2017-06-14T11:16:23+00:00

commit 5ea30e4e58040cfd6434c2f33dc3ea76e2c15b05 upstream.

The stack canary is an 'unsigned long' and should be fully initialized to
random data rather than only 32 bits of random data.

Signed-off-by: Daniel Micay 
Acked-by: Arjan van de Ven 
Acked-by: Rik van Riel 
Acked-by: Kees Cook 
Cc: Arjan van Ven 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: kernel-hardening@lists.openwall.com
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20170504133209.3053-1-danielmicay@gmail.com
Signed-off-by: Ingo Molnar 
Signed-off-by: Greg Kroah-Hartman

ptrace: Properly initialize ptracer_cred on fork

2017-06-14T11:16:20+00:00

commit c70d9d809fdeecedb96972457ee45c49a232d97f upstream.

When I introduced ptracer_cred I failed to consider the weirdness of
fork where the task_struct copies the old value by default.  This
winds up leaving ptracer_cred set even when a process forks and
the child process does not wind up being ptraced.

Because ptracer_cred is not set on non-ptraced processes whose
parents were ptraced this has broken the ability of the enlightenment
window manager to start setuid children.

Fix this by properly initializing ptracer_cred in ptrace_init_task

This must be done with a little bit of care to preserve the current value
of ptracer_cred when ptrace carries through fork.  Re-reading the
ptracer_cred from the ptracing process at this point is inconsistent
with how PT_PTRACE_CAP has been maintained all of these years.

Tested-by: Takashi Iwai 
Fixes: 64b875f7ac8a ("ptrace: Capture the ptracer's creds not PT_PTRACE_CAP")
Signed-off-by: "Eric W. Biederman" 
Signed-off-by: Greg Kroah-Hartman

tracing/kprobes: Enforce kprobes teardown after testing

2017-05-25T12:30:17+00:00

commit 30e7d894c1478c88d50ce94ddcdbd7f9763d9cdd upstream.

Enabling the tracer selftest triggers occasionally the warning in
text_poke(), which warns when the to be modified page is not marked
reserved.

The reason is that the tracer selftest installs kprobes on functions marked
__init for testing. These probes are removed after the tests, but that
removal schedules the delayed kprobes_optimizer work, which will do the
actual text poke. If the work is executed after the init text is freed,
then the warning triggers. The bug can be reproduced reliably when the work
delay is increased.

Flush the optimizer work and wait for the optimizing/unoptimizing lists to
become empty before returning from the kprobes tracer selftest. That
ensures that all operations which were queued due to the probes removal
have completed.

Link: http://lkml.kernel.org/r/20170516094802.76a468bb@gandalf.local.home

Signed-off-by: Thomas Gleixner 
Acked-by: Masami Hiramatsu 
Fixes: 6274de498 ("kprobes: Support delayed unoptimizing")
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman

genirq: Fix chained interrupt data ordering

2017-05-25T12:30:17+00:00

commit 2c4569ca26986d18243f282dd727da27e9adae4c upstream.

irq_set_chained_handler_and_data() sets up the chained interrupt and then
stores the handler data.

That's racy against an immediate interrupt which gets handled before the
store of the handler data happened. The handler will dereference a NULL
pointer and crash.

Cure it by storing handler data before installing the chained handler.

Reported-by: Borislav Petkov 
Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

sched/fair: Initialize throttle_count for new task-groups lazily

2017-05-25T12:30:12+00:00

commit 094f469172e00d6ab0a3130b0e01c83b3cf3a98d upstream.

Cgroup created inside throttled group must inherit current throttle_count.
Broken throttle_count allows to nominate throttled entries as a next buddy,
later this leads to null pointer dereference in pick_next_task_fair().

This patch initialize cfs_rq->throttle_count at first enqueue: laziness
allows to skip locking all rq at group creation. Lazy approach also allows
to skip full sub-tree scan at throttling hierarchy (not in this patch).

Signed-off-by: Konstantin Khlebnikov 
Signed-off-by: Peter Zijlstra (Intel) 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: bsegall@google.com
Link: http://lkml.kernel.org/r/146608182119.21870.8439834428248129633.stgit@buzz
Signed-off-by: Ingo Molnar 
Cc: Ben Pineau 
Signed-off-by: Greg Kroah-Hartman