Pull misc x86 fixes from Ingo Molnar:

 - Follow up fixes for the BHI mitigations code

 - Fix !SPECULATION_MITIGATIONS bug not turning off mitigations as
   expected

 - Work around an APIC emulation bug when the kernel is built with Clang
   and run as a SEV guest

 - Follow up x86 topology fixes

* tag 'x86-urgent-2024-04-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu/amd: Move TOPOEXT enablement into the topology parser
  x86/cpu/amd: Make the NODEID_MSR union actually work
  x86/cpu/amd: Make the CPUID 0x80000008 parser correct
  x86/bugs: Replace CONFIG_SPECTRE_BHI_{ON,OFF} with CONFIG_MITIGATION_SPECTRE_BHI
  x86/bugs: Remove CONFIG_BHI_MITIGATION_AUTO and spectre_bhi=auto
  x86/bugs: Clarify that syscall hardening isn't a BHI mitigation
  x86/bugs: Fix BHI handling of RRSBA
  x86/bugs: Rename various 'ia32_cap' variables to 'x86_arch_cap_msr'
  x86/bugs: Cache the value of MSR_IA32_ARCH_CAPABILITIES
  x86/bugs: Fix BHI documentation
  x86/cpu: Actually turn off mitigations by default for SPECULATION_MITIGATIONS=n
  x86/topology: Don't update cpu_possible_map in topo_set_cpuids()
  x86/bugs: Fix return type of spectre_bhi_state()
  x86/apic: Force native_apic_mem_read() to use the MOV instruction

Pull timer fixes from Ingo Molnar:

 - Address a (valid) W=1 build warning

 - Fix timer self-tests

 - Annotate a KCSAN warning wrt. accesses to the tick_do_timer_cpu
   global variable

 - Address a !CONFIG_BUG build warning

* tag 'timers-urgent-2024-04-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  selftests: kselftest: Fix build failure with NOLIBC
  selftests: timers: Fix abs() warning in posix_timers test
  selftests: kselftest: Mark functions that unconditionally call exit() as __noreturn
  selftests: timers: Fix posix_timers ksft_print_msg() warning
  selftests: timers: Fix valid-adjtimex signed left-shift undefined behavior
  bug: Fix no-return-statement warning with !CONFIG_BUG
  timekeeping: Use READ/WRITE_ONCE() for tick_do_timer_cpu
  selftests/timers/posix_timers: Reimplement check_timer_distribution()
  irqflags: Explicitly ignore lockdep_hrtimer_exit() argument

Pull dma-mapping fixes from Christoph Hellwig:

 - fix up swiotlb buffer padding even more (Petr Tesarik)

 - fix for partial dma_sync on swiotlb (Michael Kelley)

 - swiotlb debugfs fix (Dexuan Cui)

* tag 'dma-maping-6.9-2024-04-14' of git://git.infradead.org/users/hch/dma-mapping:
  swiotlb: do not set total_used to 0 in swiotlb_create_debugfs_files()
  swiotlb: fix swiotlb_bounce() to do partial sync's correctly
  swiotlb: extend buffer pre-padding to alloc_align_mask if necessary

Pull tracing fixes from Steven Rostedt:

 - Fix the buffer_percent accounting as it is dependent on three
   variables:

     1) pages_read - number of subbuffers read
     2) pages_lost - number of subbuffers lost due to overwrite
     3) pages_touched - number of pages that a writer entered

   These three counters only increment, and to know how many active
   pages there are on the buffer at any given time, the pages_read and
   pages_lost are subtracted from pages_touched.

   But the pages touched was incremented whenever any writer went to the
   next subbuffer even if it wasn't the only one, so it was incremented
   more than it should be causing the counter for how many subbuffers
   currently have content incorrect, which caused the buffer_percent
   that holds waiters until the ring buffer is filled to a given
   percentage to wake up early.

 - Fix warning of unused functions when PERF_EVENTS is not configured in

 - Replace bad tab with space in Kconfig for FTRACE_RECORD_RECURSION_SIZE

 - Fix to some kerneldoc function comments in eventfs code.

* tag 'trace-v6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  ring-buffer: Only update pages_touched when a new page is touched
  tracing: hide unused ftrace_event_id_fops
  tracing: Fix FTRACE_RECORD_RECURSION_SIZE Kconfig entry
  eventfs: Fix kernel-doc comments to functions

The "buffer_percent" logic that is used by the ring buffer splice code to
only wake up the tasks when there's no data after the buffer is filled to
the percentage of the "buffer_percent" file is dependent on three
variables that determine the amount of data that is in the ring buffer:

 1) pages_read - incremented whenever a new sub-buffer is consumed
 2) pages_lost - incremented every time a writer overwrites a sub-buffer
 3) pages_touched - incremented when a write goes to a new sub-buffer

The percentage is the calculation of:

  (pages_touched - (pages_lost + pages_read)) / nr_pages

Basically, the amount of data is the total number of sub-bufs that have been
touched, minus the number of sub-bufs lost and sub-bufs consumed. This is
divided by the total count to give the buffer percentage. When the
percentage is greater than the value in the "buffer_percent" file, it
wakes up splice readers waiting for that amount.

It was observed that over time, the amount read from the splice was
constantly decreasing the longer the trace was running. That is, if one
asked for 60%, it would read over 60% when it first starts tracing, but
then it would be woken up at under 60% and would slowly decrease the
amount of data read after being woken up, where the amount becomes much
less than the buffer percent.

This was due to an accounting of the pages_touched incrementation. This
value is incremented whenever a writer transfers to a new sub-buffer. But
the place where it was incremented was incorrect. If a writer overflowed
the current sub-buffer it would go to the next one. If it gets preempted
by an interrupt at that time, and the interrupt performs a trace, it too
will end up going to the next sub-buffer. But only one should increment
the counter. Unfortunately, that was not the case.

Change the cmpxchg() that does the real switch of the tail-page into a
try_cmpxchg(), and on success, perform the increment of pages_touched. This
will only increment the counter once for when the writer moves to a new
sub-buffer, and not when there's a race and is incremented for when a
writer and its preempting writer both move to the same new sub-buffer.

Link: https://lore.kernel.org/linux-trace-kernel/20240409151309.0d0e5056@gandalf.local.home

Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 2c2b0a78b3739 ("ring-buffer: Add percentage of ring buffer full to wake up reader")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

When CONFIG_PERF_EVENTS, a 'make W=1' build produces a warning about the
unused ftrace_event_id_fops variable:

kernel/trace/trace_events.c:2155:37: error: 'ftrace_event_id_fops' defined but not used [-Werror=unused-const-variable=]
 2155 | static const struct file_operations ftrace_event_id_fops = {

Hide this in the same #ifdef as the reference to it.

Link: https://lore.kernel.org/linux-trace-kernel/20240403080702.3509288-7-arnd@kernel.org

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Ajay Kaher <akaher@vmware.com>
Cc: Jinjie Ruan <ruanjinjie@huawei.com>
Cc: Clément Léger <cleger@rivosinc.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: "Tzvetomir Stoyanov (VMware)" <tz.stoyanov@gmail.com>
Fixes: 620a30e97feb ("tracing: Don't pass file_operations array to event_create_dir()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Fix FTRACE_RECORD_RECURSION_SIZE entry, replace tab with
a space character. It helps Kconfig parsers to read file
without error.

Link: https://lore.kernel.org/linux-trace-kernel/20240322121801.1803948-1-ppandit@redhat.com

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 773c16705058 ("ftrace: Add recording of functions that caused recursion")
Signed-off-by: Prasad Pandit <pjp@fedoraproject.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Pull power management fix from Rafael Wysocki:
 "Fix the suspend-to-idle core code to guarantee that timers queued on
  CPUs other than the one that has first left the idle state, which
  should expire directly after resume, will be handled (Anna-Maria
  Behnsen)"

* tag 'pm-6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM: s2idle: Make sure CPUs will wakeup directly on resume

When unloading a module, its state is changing MODULE_STATE_LIVE ->
 MODULE_STATE_GOING -> MODULE_STATE_UNFORMED. Each change will take
a time. `is_module_text_address()` and `__module_text_address()`
works with MODULE_STATE_LIVE and MODULE_STATE_GOING.
If we use `is_module_text_address()` and `__module_text_address()`
separately, there is a chance that the first one is succeeded but the
next one is failed because module->state becomes MODULE_STATE_UNFORMED
between those operations.

In `check_kprobe_address_safe()`, if the second `__module_text_address()`
is failed, that is ignored because it expected a kernel_text address.
But it may have failed simply because module->state has been changed
to MODULE_STATE_UNFORMED. In this case, arm_kprobe() will try to modify
non-exist module text address (use-after-free).

To fix this problem, we should not use separated `is_module_text_address()`
and `__module_text_address()`, but use only `__module_text_address()`
once and do `try_module_get(module)` which is only available with
MODULE_STATE_LIVE.

Link: https://lore.kernel.org/all/20240410015802.265220-1-zhengyejian1@huawei.com/

Fixes: 28f6c37a2910 ("kprobes: Forbid probing on trampoline and BPF code areas")
Cc: stable@vger.kernel.org
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

Initialize cpu_mitigations to CPU_MITIGATIONS_OFF if the kernel is built
with CONFIG_SPECULATION_MITIGATIONS=n, as the help text quite clearly
states that disabling SPECULATION_MITIGATIONS is supposed to turn off all
mitigations by default.

  │ If you say N, all mitigations will be disabled. You really
  │ should know what you are doing to say so.

As is, the kernel still defaults to CPU_MITIGATIONS_AUTO, which results in
some mitigations being enabled in spite of SPECULATION_MITIGATIONS=n.

Fixes: f43b9876e857 ("x86/retbleed: Add fine grained Kconfig knobs")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Cc: stable@vger.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240409175108.1512861-2-seanjc@google.com