linux-toradex.git/mm/filemap.c, branch v2.6.28

fs: remove prepare_write/commit_write

2008-10-30T18:38:45+00:00

Nothing uses prepare_write or commit_write. Remove them from the tree
completely.

[akpm@linux-foundation.org: schedule simple_prepare_write() for unexporting]
Signed-off-by: Nick Piggin 
Cc: Christoph Hellwig 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

memcg: make page->mapping NULL before uncharge

2008-10-20T15:52:38+00:00

This patch tries to make page->mapping to be NULL before
mem_cgroup_uncharge_cache_page() is called.

"page->mapping == NULL" is a good check for "whether the page is still
radix-tree or not".  This patch also adds BUG_ON() to
mem_cgroup_uncharge_cache_page();

Signed-off-by: KAMEZAWA Hiroyuki 
Reviewed-by: Daisuke Nishimura 
Cc: Balbir Singh 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: page lock use lock bitops

2008-10-20T15:52:32+00:00

trylock_page, unlock_page open and close a critical section. Hence,
we can use the lock bitops to get the desired memory ordering.

Also, mark trylock as likely to succeed (and remove the annotation from
callers).

Signed-off-by: Nick Piggin 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

vmscan: split LRU lists into anon & file sets

2008-10-20T15:50:25+00:00

Split the LRU lists in two, one set for pages that are backed by real file
systems ("file") and one for pages that are backed by memory and swap
("anon").  The latter includes tmpfs.

The advantage of doing this is that the VM will not have to scan over lots
of anonymous pages (which we generally do not want to swap out), just to
find the page cache pages that it should evict.

This patch has the infrastructure and a basic policy to balance how much
we scan the anon lists and how much we scan the file lists.  The big
policy changes are in separate patches.

[lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset]
[kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru]
[kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page]
[hugh@veritas.com: memcg swapbacked pages active]
[hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED]
[akpm@linux-foundation.org: fix /proc/vmstat units]
[nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration]
[kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo]
[kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()]
Signed-off-by: Rik van Riel 
Signed-off-by: Lee Schermerhorn 
Signed-off-by: KOSAKI Motohiro 
Signed-off-by: Hugh Dickins 
Signed-off-by: Daisuke Nishimura 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge branch 'core-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

2008-10-16T22:17:40+00:00

* 'core-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  do_generic_file_read: s/EINTR/EIO/ if lock_page_killable() fails
  softirq, warning fix: correct a format to avoid a warning
  softirqs, debug: preemption check
  x86, pci-hotplug, calgary / rio: fix EBDA ioremap()
  IO resources, x86: ioremap sanity check to catch mapping requests exceeding, fix
  IO resources, x86: ioremap sanity check to catch mapping requests exceeding the BAR sizes
  softlockup: Documentation/sysctl/kernel.txt: fix softlockup_thresh description
  dmi scan: warn about too early calls to dmi_check_system()
  generic: redefine resource_size_t as phys_addr_t
  generic: make PFN_PHYS explicitly return phys_addr_t
  generic: add phys_addr_t for holding physical addresses
  softirq: allocate less vectors
  IO resources: fix/remove printk
  printk: robustify printk, update comment
  printk: robustify printk, fix #2
  printk: robustify printk, fix
  printk: robustify printk

Fixed up conflicts in:
	arch/powerpc/include/asm/types.h
	arch/powerpc/platforms/Kconfig.cputype
manually.

mm: do_generic_file_read() never gets a NULL 'filp' argument

2008-10-16T18:21:29+00:00

The 'filp' argument to do_generic_file_read() is never NULL.

Signed-off-by: Krishna Kumar 
Reviewed-by: KOSAKI Motohiro 
Cc: Christoph Hellwig 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

do_generic_file_read: s/EINTR/EIO/ if lock_page_killable() fails

2008-10-14T15:15:33+00:00

If lock_page_killable() fails because the task was killed by SIGKILL or
any other fatal signal, do_generic_file_read() returns -EIO.

This seems to be OK, because in fact the userspace won't see this error,
the task will dequeue SIGKILL and exit.

However, /sbin/init is different, it will dequeue SIGKILL, ignore it, and
return to the user-space with the bogus -EIO.

Change the code to return the error code from lock_page_killable(), -EINTR.
This doesn't fix the bug, but perhaps makes sense anyway. Imho, with this
change the code looks a bit more logical, and the "good" init should handle
the spurious EINTR or short read.

Afaics we can also change lock_page_killable() to return -ERESTARTNOINTR,
but this can't prevent the short reads.

Signed-off-by: Oleg Nesterov 
Signed-off-by: Ingo Molnar

VFS: fix dio write returning EIO when try_to_release_page fails

2008-09-03T02:21:37+00:00

Dio write returns EIO when try_to_release_page fails because bh is
still referenced.

The patch

    commit 3f31fddfa26b7594b44ff2b34f9a04ba409e0f91
    Author: Mingming Cao 
    Date:   Fri Jul 25 01:46:22 2008 -0700

        jbd: fix race between free buffer and commit transaction

was merged into 2.6.27-rc1, but I noticed that this patch is not enough
to fix the race.

I did fsstress test heavily to 2.6.27-rc1, and found that dio write still
sometimes got EIO through this test.

The patch above fixed race between freeing buffer(dio) and committing
transaction(jbd) but I discovered that there is another race, freeing
buffer(dio) and ext3/4_ordered_writepage.

: background_writeout()
     ->write_cache_pages()
       ->ext3_ordered_writepage()
     	   walk_page_buffers() -> take a bh ref
 	   block_write_full_page() -> unlock_page
		: <- end_page_writeback
                : <- race! (dio write->try_to_release_page fails)
      	   walk_page_buffers() ->release a bh ref

ext3_ordered_writepage holds bh ref and does unlock_page remaining
taking a bh ref, so this causes the race and failure of
try_to_release_page.

To fix this race, I used the approach of falling back to buffered
writes if try_to_release_page() fails on a page.

[akpm@linux-foundation.org: cleanups]
Signed-off-by: Hisashi Hifumi 
Cc: Chris Mason 
Cc: Jan Kara 
Cc: Mingming Cao 
Cc: Zach Brown 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: rename page trylock

2008-08-05T04:31:34+00:00

Converting page lock to new locking bitops requires a change of page flag
operation naming, so we might as well convert it to something nicer
(!TestSetPageLocked_Lock => trylock_page, SetPageLocked => set_page_locked).

This also facilitates lockdeping of page lock.

Signed-off-by: Nick Piggin 
Acked-by: KOSAKI Motohiro 
Acked-by: Peter Zijlstra 
Acked-by: Andrew Morton 
Acked-by: Benjamin Herrenschmidt 
Signed-off-by: Linus Torvalds

Fix off-by-one error in iov_iter_advance()

2008-07-30T21:50:18+00:00

The iov_iter_advance() function would look at the iov->iov_len entry
even though it might have iterated over the whole array, and iov was
pointing past the end.  This would cause DEBUG_PAGEALLOC to trigger a
kernel page fault if the allocation was at the end of a page, and the
next page was unallocated.

The quick fix is to just change the order of the tests: check that there
is any iovec data left before we check the iov entry itself.

Thanks to Alexey Dobriyan for finding this case, and testing the fix.

Reported-and-tested-by: Alexey Dobriyan 
Cc: Nick Piggin 
Cc: Andrew Morton 
Cc:  [2.6.25.x, 2.6.26.x]
Signed-off-by: Linus Torvalds