linux-toradex.git/mm/filemap.c, branch v4.4.57

mm: do not access page->mapping directly on page_endio

2017-03-12T05:37:25+00:00

commit dd8416c47715cf324c9a16f13273f9fda87acfed upstream.

With rw_page, page_endio is used for completing IO on a page and it
propagates write error to the address space if the IO fails.  The
problem is it accesses page->mapping directly which might be okay for
file-backed pages but it shouldn't for anonymous page.  Otherwise, it
can corrupt one of field from anon_vma under us and system goes panic
randomly.

swap_writepage
  bdev_writepage
    ops->rw_page

I encountered the BUG during developing new zram feature and it was
really hard to figure it out because it made random crash, somtime
mmap_sem lockdep, sometime other places where places never related to
zram/zsmalloc, and not reproducible with some configuration.

When I consider how that bug is subtle and people do fast-swap test with
brd, it's worth to add stable mark, I think.

Fixes: dd6bd0d9c7db ("swap: use bdev_read_page() / bdev_write_page()")
Signed-off-by: Minchan Kim 
Acked-by: Michal Hocko 
Cc: Matthew Wilcox 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

mm, fs: check for fatal signals in do_generic_file_read()

2017-02-09T07:02:46+00:00

commit 5abf186a30a89d5b9c18a6bf93a2c192c9fd52f6 upstream.

do_generic_file_read() can be told to perform a large request from
userspace.  If the system is under OOM and the reading task is the OOM
victim then it has an access to memory reserves and finishing the full
request can lead to the full memory depletion which is dangerous.  Make
sure we rather go with a short read and allow the killed task to
terminate.

Link: http://lkml.kernel.org/r/20170201092706.9966-3-mhocko@kernel.org
Signed-off-by: Michal Hocko 
Reviewed-by: Christoph Hellwig 
Cc: Tetsuo Handa 
Cc: Al Viro 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

mm: filemap: fix mapping->nrpages double accounting in fuse

2016-10-28T07:01:34+00:00

commit 3ddf40e8c31964b744ff10abb48c8e36a83ec6e7 upstream.

Commit 22f2ac51b6d6 ("mm: workingset: fix crash in shadow node shrinker
caused by replace_page_cache_page()") switched replace_page_cache() from
raw radix tree operations to page_cache_tree_insert() but didn't take
into account that the latter function, unlike the raw radix tree op,
handles mapping->nrpages.  As a result, that counter is bumped for each
page replacement rather than balanced out even.

The mapping->nrpages counter is used to skip needless radix tree walks
when invalidating, truncating, syncing inodes without pages, as well as
statistics for userspace.  Since the error is positive, we'll do more
page cache tree walks than necessary; we won't miss a necessary one.
And we'll report more buffer pages to userspace than there are.  The
error is limited to fuse inodes.

Fixes: 22f2ac51b6d6 ("mm: workingset: fix crash in shadow node shrinker caused by replace_page_cache_page()")
Signed-off-by: Johannes Weiner 
Cc: Andrew Morton 
Cc: Miklos Szeredi 
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds 
Signed-off-by: Michal Hocko 
Signed-off-by: Greg Kroah-Hartman

mm: workingset: fix crash in shadow node shrinker caused by replace_page_cache_page()

2016-10-28T07:01:34+00:00

commit 22f2ac51b6d643666f4db093f13144f773ff3f3a upstream.

Antonio reports the following crash when using fuse under memory pressure:

  kernel BUG at /build/linux-a2WvEb/linux-4.4.0/mm/workingset.c:346!
  invalid opcode: 0000 [#1] SMP
  Modules linked in: all of them
  CPU: 2 PID: 63 Comm: kswapd0 Not tainted 4.4.0-36-generic #55-Ubuntu
  Hardware name: System manufacturer System Product Name/P8H67-M PRO, BIOS 3904 04/27/2013
  task: ffff88040cae6040 ti: ffff880407488000 task.ti: ffff880407488000
  RIP: shadow_lru_isolate+0x181/0x190
  Call Trace:
    __list_lru_walk_one.isra.3+0x8f/0x130
    list_lru_walk_one+0x23/0x30
    scan_shadow_nodes+0x34/0x50
    shrink_slab.part.40+0x1ed/0x3d0
    shrink_zone+0x2ca/0x2e0
    kswapd+0x51e/0x990
    kthread+0xd8/0xf0
    ret_from_fork+0x3f/0x70

which corresponds to the following sanity check in the shadow node
tracking:

  BUG_ON(node->count & RADIX_TREE_COUNT_MASK);

The workingset code tracks radix tree nodes that exclusively contain
shadow entries of evicted pages in them, and this (somewhat obscure)
line checks whether there are real pages left that would interfere with
reclaim of the radix tree node under memory pressure.

While discussing ways how fuse might sneak pages into the radix tree
past the workingset code, Miklos pointed to replace_page_cache_page(),
and indeed there is a problem there: it properly accounts for the old
page being removed - __delete_from_page_cache() does that - but then
does a raw raw radix_tree_insert(), not accounting for the replacement
page.  Eventually the page count bits in node->count underflow while
leaving the node incorrectly linked to the shadow node LRU.

To address this, make sure replace_page_cache_page() uses the tracked
page insertion code, page_cache_tree_insert().  This fixes the page
accounting and makes sure page-containing nodes are properly unlinked
from the shadow node LRU again.

Also, make the sanity checks a bit less obscure by using the helpers for
checking the number of pages and shadows in a radix tree node.

[mhocko@suse.com: backport for 4.4]
Fixes: 449dd6984d0e ("mm: keep page cache radix tree nodes in check")
Link: http://lkml.kernel.org/r/20160919155822.29498-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner 
Reported-by: Antonio SJ Musumeci 
Debugged-by: Miklos Szeredi 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Michal Hocko 
Signed-off-by: Greg Kroah-Hartman

mm: filemap: don't plant shadow entries without radix tree node

2016-10-28T07:01:32+00:00

commit d3798ae8c6f3767c726403c2ca6ecc317752c9dd upstream.

When the underflow checks were added to workingset_node_shadow_dec(),
they triggered immediately:

  kernel BUG at ./include/linux/swap.h:276!
  invalid opcode: 0000 [#1] SMP
  Modules linked in: isofs usb_storage fuse xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 tun nf_conntrack_netbios_ns nf_conntrack_broadcast ip6t_REJECT nf_reject_ipv6
   soundcore wmi acpi_als pinctrl_sunrisepoint kfifo_buf tpm_tis industrialio acpi_pad pinctrl_intel tpm_tis_core tpm nfsd auth_rpcgss nfs_acl lockd grace sunrpc dm_crypt
  CPU: 0 PID: 20929 Comm: blkid Not tainted 4.8.0-rc8-00087-gbe67d60ba944 #1
  Hardware name: System manufacturer System Product Name/Z170-K, BIOS 1803 05/06/2016
  task: ffff8faa93ecd940 task.stack: ffff8faa7f478000
  RIP: page_cache_tree_insert+0xf1/0x100
  Call Trace:
    __add_to_page_cache_locked+0x12e/0x270
    add_to_page_cache_lru+0x4e/0xe0
    mpage_readpages+0x112/0x1d0
    blkdev_readpages+0x1d/0x20
    __do_page_cache_readahead+0x1ad/0x290
    force_page_cache_readahead+0xaa/0x100
    page_cache_sync_readahead+0x3f/0x50
    generic_file_read_iter+0x5af/0x740
    blkdev_read_iter+0x35/0x40
    __vfs_read+0xe1/0x130
    vfs_read+0x96/0x130
    SyS_read+0x55/0xc0
    entry_SYSCALL_64_fastpath+0x13/0x8f
  Code: 03 00 48 8b 5d d8 65 48 33 1c 25 28 00 00 00 44 89 e8 75 19 48 83 c4 18 5b 41 5c 41 5d 41 5e 5d c3 0f 0b 41 bd ef ff ff ff eb d7 <0f> 0b e8 88 68 ef ff 0f 1f 84 00
  RIP  page_cache_tree_insert+0xf1/0x100

This is a long-standing bug in the way shadow entries are accounted in
the radix tree nodes. The shrinker needs to know when radix tree nodes
contain only shadow entries, no pages, so node->count is split in half
to count shadows in the upper bits and pages in the lower bits.

Unfortunately, the radix tree implementation doesn't know of this and
assumes all entries are in node->count. When there is a shadow entry
directly in root->rnode and the tree is later extended, the radix tree
implementation will copy that entry into the new node and and bump its
node->count, i.e. increases the page count bits. Once the shadow gets
removed and we subtract from the upper counter, node->count underflows
and triggers the warning. Afterwards, without node->count reaching 0
again, the radix tree node is leaked.

Limit shadow entries to when we have actual radix tree nodes and can
count them properly. That means we lose the ability to detect refaults
from files that had only the first page faulted in at eviction time.

Fixes: 449dd6984d0e ("mm: keep page cache radix tree nodes in check")
Signed-off-by: Johannes Weiner 
Reported-and-tested-by: Linus Torvalds 
Reviewed-by: Jan Kara 
Cc: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

mm, fs: introduce mapping_gfp_constraint()

2015-11-07T01:50:42+00:00

There are many places which use mapping_gfp_mask to restrict a more
generic gfp mask which would be used for allocations which are not
directly related to the page cache but they are performed in the same
context.

Let's introduce a helper function which makes the restriction explicit and
easier to track.  This patch doesn't introduce any functional changes.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Michal Hocko 
Suggested-by: Andrew Morton 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm, page_alloc: rename __GFP_WAIT to __GFP_RECLAIM

2015-11-07T01:50:42+00:00

__GFP_WAIT was used to signal that the caller was in atomic context and
could not sleep.  Now it is possible to distinguish between true atomic
context and callers that are not willing to sleep.  The latter should
clear __GFP_DIRECT_RECLAIM so kswapd will still wake.  As clearing
__GFP_WAIT behaves differently, there is a risk that people will clear the
wrong flags.  This patch renames __GFP_WAIT to __GFP_RECLAIM to clearly
indicate what it does -- setting it allows all reclaim activity, clearing
them prevents it.

[akpm@linux-foundation.org: fix build]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Mel Gorman 
Acked-by: Michal Hocko 
Acked-by: Vlastimil Babka 
Acked-by: Johannes Weiner 
Cc: Christoph Lameter 
Acked-by: David Rientjes 
Cc: Vitaly Wool 
Cc: Rik van Riel 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: rename mem_cgroup_migrate to mem_cgroup_replace_page

2015-11-06T03:34:48+00:00

After v4.3's commit 0610c25daa3e ("memcg: fix dirty page migration")
mem_cgroup_migrate() doesn't have much to offer in page migration: convert
migrate_misplaced_transhuge_page() to set_page_memcg() instead.

Then rename mem_cgroup_migrate() to mem_cgroup_replace_page(), since its
remaining callers are replace_page_cache_page() and shmem_replace_page():
both of whom passed lrucare true, so just eliminate that argument.

Signed-off-by: Hugh Dickins 
Cc: Christoph Lameter 
Cc: "Kirill A. Shutemov" 
Cc: Rik van Riel 
Cc: Vlastimil Babka 
Cc: Davidlohr Bueso 
Cc: Oleg Nesterov 
Cc: Sasha Levin 
Cc: Dmitry Vyukov 
Cc: KOSAKI Motohiro 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm/filemap.c: make global sync not clear error status of individual inodes

2015-11-06T03:34:48+00:00

filemap_fdatawait() is a function to wait for on-going writeback to
complete but also consume and clear error status of the mapping set during
writeback.

The latter functionality is critical for applications to detect writeback
error with system calls like fsync(2)/fdatasync(2).

However filemap_fdatawait() is also used by sync(2) or FIFREEZE ioctl,
which don't check error status of individual mappings.

As a result, fsync() may not be able to detect writeback error if events
happen in the following order:

   Application                    System admin
   ----------------------------------------------------------
   write data on page cache
                                  Run sync command
                                  writeback completes with error
                                  filemap_fdatawait() clears error
   fsync returns success
   (but the data is not on disk)

This patch adds filemap_fdatawait_keep_errors() for call sites where
writeback error is not handled so that they don't clear error status.

Signed-off-by: Jun'ichi Nomura 
Acked-by: Andi Kleen 
Reviewed-by: Tejun Heo 
Cc: Fengguang Wu 
Cc: Dave Chinner 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: use only per-device readahead limit

2015-11-06T03:34:48+00:00

Maximal readahead size is limited now by two values:
 1) by global 2Mb constant (MAX_READAHEAD in max_sane_readahead())
 2) by configurable per-device value* (bdi->ra_pages)

There are devices, which require custom readahead limit.
For instance, for RAIDs it's calculated as number of devices
multiplied by chunk size times 2.

Readahead size can never be larger than bdi->ra_pages * 2 value
(POSIX_FADV_SEQUNTIAL doubles readahead size).

If so, why do we need two limits?
I suggest to completely remove this max_sane_readahead() stuff and
use per-device readahead limit everywhere.

Also, using right readahead size for RAID disks can significantly
increase i/o performance:

before:
  dd if=/dev/md2 of=/dev/null bs=100M count=100
  100+0 records in
  100+0 records out
  10485760000 bytes (10 GB) copied, 12.9741 s, 808 MB/s

after:
  $ dd if=/dev/md2 of=/dev/null bs=100M count=100
  100+0 records in
  100+0 records out
  10485760000 bytes (10 GB) copied, 8.91317 s, 1.2 GB/s

(It's an 8-disks RAID5 storage).

This patch doesn't change sys_readahead and madvise(MADV_WILLNEED)
behavior introduced by 6d2be915e589b58 ("mm/readahead.c: fix readahead
failure for memoryless NUMA nodes and limit readahead pages").

Signed-off-by: Roman Gushchin 
Cc: Raghavendra K T 
Cc: Jan Kara 
Cc: Wu Fengguang 
Cc: David Rientjes 
Cc: onstantin Khlebnikov 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds