linux-toradex.git/mm/filemap.c, branch v5.16

filemap: remove PageHWPoison check from next_uptodate_page()

2021-12-11T01:10:55+00:00

Pages are individually marked as suffering from hardware poisoning.
Checking that the head page is not hardware poisoned doesn't make
sense; we might be after a subpage.  We check each page individually
before we use it, so this was an optimisation gone wrong.  It will
cause us to fall back to the slow path when there was no need to do
that

Link: https://lkml.kernel.org/r/20211120174429.2596303-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) 
Reviewed-by: Naoya Horiguchi 
Cc: Yang Shi 
Cc: "Kirill A . Shutemov" 
Cc: Hugh Dickins 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge branch 'akpm' (patches from Andrew)

2021-11-09T18:11:53+00:00

Merge more updates from Andrew Morton:
 "87 patches.

  Subsystems affected by this patch series: mm (pagecache and hugetlb),
  procfs, misc, MAINTAINERS, lib, checkpatch, binfmt, kallsyms, ramfs,
  init, codafs, nilfs2, hfs, crash_dump, signals, seq_file, fork,
  sysvfs, kcov, gdb, resource, selftests, and ipc"

* emailed patches from Andrew Morton : (87 commits)
  ipc/ipc_sysctl.c: remove fallback for !CONFIG_PROC_SYSCTL
  ipc: check checkpoint_restore_ns_capable() to modify C/R proc files
  selftests/kselftest/runner/run_one(): allow running non-executable files
  virtio-mem: disallow mapping virtio-mem memory via /dev/mem
  kernel/resource: disallow access to exclusive system RAM regions
  kernel/resource: clean up and optimize iomem_is_exclusive()
  scripts/gdb: handle split debug for vmlinux
  kcov: replace local_irq_save() with a local_lock_t
  kcov: avoid enable+disable interrupts if !in_task()
  kcov: allocate per-CPU memory on the relevant node
  Documentation/kcov: define `ip' in the example
  Documentation/kcov: include types.h in the example
  sysv: use BUILD_BUG_ON instead of runtime check
  kernel/fork.c: unshare(): use swap() to make code cleaner
  seq_file: fix passing wrong private data
  seq_file: move seq_escape() to a header
  signal: remove duplicate include in signal.h
  crash_dump: remove duplicate include in crash_dump.h
  crash_dump: fix boolreturn.cocci warning
  hfs/hfsplus: use WARN_ON for sanity check
  ...

vfs: keep inodes with page cache off the inode shrinker LRU

2021-11-09T18:02:48+00:00

Historically (pre-2.5), the inode shrinker used to reclaim only empty
inodes and skip over those that still contained page cache.  This caused
problems on highmem hosts: struct inode could put fill lowmem zones
before the cache was getting reclaimed in the highmem zones.

To address this, the inode shrinker started to strip page cache to
facilitate reclaiming lowmem.  However, this comes with its own set of
problems: the shrinkers may drop actively used page cache just because
the inodes are not currently open or dirty - think working with a large
git tree.  It further doesn't respect cgroup memory protection settings
and can cause priority inversions between containers.

Nowadays, the page cache also holds non-resident info for evicted cache
pages in order to detect refaults.  We've come to rely heavily on this
data inside reclaim for protecting the cache workingset and driving swap
behavior.  We also use it to quantify and report workload health through
psi.  The latter in turn is used for fleet health monitoring, as well as
driving automated memory sizing of workloads and containers, proactive
reclaim and memory offloading schemes.

The consequences of dropping page cache prematurely is that we're seeing
subtle and not-so-subtle failures in all of the above-mentioned
scenarios, with the workload generally entering unexpected thrashing
states while losing the ability to reliably detect it.

To fix this on non-highmem systems at least, going back to rotating
inodes on the LRU isn't feasible.  We've tried (commit a76cf1a474d7
("mm: don't reclaim inodes with many attached pages")) and failed
(commit 69056ee6a8a3 ("Revert "mm: don't reclaim inodes with many
attached pages"")).

The issue is mostly that shrinker pools attract pressure based on their
size, and when objects get skipped the shrinkers remember this as
deferred reclaim work.  This accumulates excessive pressure on the
remaining inodes, and we can quickly eat into heavily used ones, or
dirty ones that require IO to reclaim, when there potentially is plenty
of cold, clean cache around still.

Instead, this patch keeps populated inodes off the inode LRU in the
first place - just like an open file or dirty state would.  An otherwise
clean and unused inode then gets queued when the last cache entry
disappears.  This solves the problem without reintroducing the reclaim
issues, and generally is a bit more scalable than having to wade through
potentially hundreds of thousands of busy inodes.

Locking is a bit tricky because the locks protecting the inode state
(i_lock) and the inode LRU (lru_list.lock) don't nest inside the
irq-safe page cache lock (i_pages.xa_lock).  Page cache deletions are
serialized through i_lock, taken before the i_pages lock, to make sure
depopulated inodes are queued reliably.  Additions may race with
deletions, but we'll check again in the shrinker.  If additions race
with the shrinker itself, we're protected by the i_lock: if find_inode()
or iput() win, the shrinker will bail on the elevated i_count or
I_REFERENCED; if the shrinker wins and goes ahead with the inode, it
will set I_FREEING and inhibit further igets(), which will cause the
other side to create a new instance of the inode instead.

Link: https://lkml.kernel.org/r/20210614211904.14420-4-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner 
Cc: Roman Gushchin 
Cc: Tejun Heo 
Cc: Dave Chinner 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge branch 'akpm' (patches from Andrew)

2021-11-06T21:08:17+00:00

Merge misc updates from Andrew Morton:
 "257 patches.

  Subsystems affected by this patch series: scripts, ocfs2, vfs, and
  mm (slab-generic, slab, slub, kconfig, dax, kasan, debug, pagecache,
  gup, swap, memcg, pagemap, mprotect, mremap, iomap, tracing, vmalloc,
  pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, tools,
  memblock, oom-kill, hugetlbfs, migration, thp, readahead, nommu, ksm,
  vmstat, madvise, memory-hotplug, rmap, zsmalloc, highmem, zram,
  cleanups, kfence, and damon)"

* emailed patches from Andrew Morton : (257 commits)
  mm/damon: remove return value from before_terminate callback
  mm/damon: fix a few spelling mistakes in comments and a pr_debug message
  mm/damon: simplify stop mechanism
  Docs/admin-guide/mm/pagemap: wordsmith page flags descriptions
  Docs/admin-guide/mm/damon/start: simplify the content
  Docs/admin-guide/mm/damon/start: fix a wrong link
  Docs/admin-guide/mm/damon/start: fix wrong example commands
  mm/damon/dbgfs: add adaptive_targets list check before enable monitor_on
  mm/damon: remove unnecessary variable initialization
  Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM
  mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM)
  selftests/damon: support watermarks
  mm/damon/dbgfs: support watermarks
  mm/damon/schemes: activate schemes based on a watermarks mechanism
  tools/selftests/damon: update for regions prioritization of schemes
  mm/damon/dbgfs: support prioritization weights
  mm/damon/vaddr,paddr: support pageout prioritization
  mm/damon/schemes: prioritize regions within the quotas
  mm/damon/selftests: support schemes quotas
  mm/damon/dbgfs: support quotas of schemes
  ...

mm/vmscan: throttle reclaim until some writeback completes if congested

2021-11-06T20:30:40+00:00

Patch series "Remove dependency on congestion_wait in mm/", v5.

This series that removes all calls to congestion_wait in mm/ and deletes
wait_iff_congested.  It's not a clever implementation but
congestion_wait has been broken for a long time [1].

Even if congestion throttling worked, it was never a great idea.  While
excessive dirty/writeback pages at the tail of the LRU is one
possibility that reclaim may be slow, there is also the problem of too
many pages being isolated and reclaim failing for other reasons
(elevated references, too many pages isolated, excessive LRU contention
etc).

This series replaces the "congestion" throttling with 3 different types.

 - If there are too many dirty/writeback pages, sleep until a timeout or
   enough pages get cleaned

 - If too many pages are isolated, sleep until enough isolated pages are
   either reclaimed or put back on the LRU

 - If no progress is being made, direct reclaim tasks sleep until
   another task makes progress with acceptable efficiency.

This was initially tested with a mix of workloads that used to trigger
corner cases that no longer work.  A new test case was created called
"stutterp" (pagereclaim-stutterp-noreaders in mmtests) using a freshly
created XFS filesystem.  Note that it may be necessary to increase the
timeout of ssh if executing remotely as ssh itself can get throttled and
the connection may timeout.

stutterp varies the number of "worker" processes from 4 up to NR_CPUS*4
to check the impact as the number of direct reclaimers increase.  It has
four types of worker.

 - One "anon latency" worker creates small mappings with mmap() and
   times how long it takes to fault the mapping reading it 4K at a time

 - X file writers which is fio randomly writing X files where the total
   size of the files add up to the allowed dirty_ratio. fio is allowed
   to run for a warmup period to allow some file-backed pages to
   accumulate. The duration of the warmup is based on the best-case
   linear write speed of the storage.

 - Y file readers which is fio randomly reading small files

 - Z anon memory hogs which continually map (100-dirty_ratio)% of memory

 - Total estimated WSS = (100+dirty_ration) percentage of memory

X+Y+Z+1 == NR_WORKERS varying from 4 up to NR_CPUS*4

The intent is to maximise the total WSS with a mix of file and anon
memory where some anonymous memory must be swapped and there is a high
likelihood of dirty/writeback pages reaching the end of the LRU.

The test can be configured to have no background readers to stress
dirty/writeback pages.  The results below are based on having zero
readers.

The short summary of the results is that the series works and stalls
until some event occurs but the timeouts may need adjustment.

The test results are not broken down by patch as the series should be
treated as one block that replaces a broken throttling mechanism with a
working one.

Finally, three machines were tested but I'm reporting the worst set of
results.  The other two machines had much better latencies for example.

First the results of the "anon latency" latency

  stutterp
                                5.15.0-rc1             5.15.0-rc1
                                   vanilla mm-reclaimcongest-v5r4
  Amean     mmap-4      31.4003 (   0.00%)   2661.0198 (-8374.52%)
  Amean     mmap-7      38.1641 (   0.00%)    149.2891 (-291.18%)
  Amean     mmap-12     60.0981 (   0.00%)    187.8105 (-212.51%)
  Amean     mmap-21    161.2699 (   0.00%)    213.9107 ( -32.64%)
  Amean     mmap-30    174.5589 (   0.00%)    377.7548 (-116.41%)
  Amean     mmap-48   8106.8160 (   0.00%)   1070.5616 (  86.79%)
  Stddev    mmap-4      41.3455 (   0.00%)  27573.9676 (-66591.66%)
  Stddev    mmap-7      53.5556 (   0.00%)   4608.5860 (-8505.23%)
  Stddev    mmap-12    171.3897 (   0.00%)   5559.4542 (-3143.75%)
  Stddev    mmap-21   1506.6752 (   0.00%)   5746.2507 (-281.39%)
  Stddev    mmap-30    557.5806 (   0.00%)   7678.1624 (-1277.05%)
  Stddev    mmap-48  61681.5718 (   0.00%)  14507.2830 (  76.48%)
  Max-90    mmap-4      31.4243 (   0.00%)     83.1457 (-164.59%)
  Max-90    mmap-7      41.0410 (   0.00%)     41.0720 (  -0.08%)
  Max-90    mmap-12     66.5255 (   0.00%)     53.9073 (  18.97%)
  Max-90    mmap-21    146.7479 (   0.00%)    105.9540 (  27.80%)
  Max-90    mmap-30    193.9513 (   0.00%)     64.3067 (  66.84%)
  Max-90    mmap-48    277.9137 (   0.00%)    591.0594 (-112.68%)
  Max       mmap-4    1913.8009 (   0.00%) 299623.9695 (-15555.96%)
  Max       mmap-7    2423.9665 (   0.00%) 204453.1708 (-8334.65%)
  Max       mmap-12   6845.6573 (   0.00%) 221090.3366 (-3129.64%)
  Max       mmap-21  56278.6508 (   0.00%) 213877.3496 (-280.03%)
  Max       mmap-30  19716.2990 (   0.00%) 216287.6229 (-997.00%)
  Max       mmap-48 477923.9400 (   0.00%) 245414.8238 (  48.65%)

For most thread counts, the time to mmap() is unfortunately increased.
In earlier versions of the series, this was lower but a large number of
throttling events were reaching their timeout increasing the amount of
inefficient scanning of the LRU.  There is no prioritisation of reclaim
tasks making progress based on each tasks rate of page allocation versus
progress of reclaim.  The variance is also impacted for high worker
counts but in all cases, the differences in latency are not
statistically significant due to very large maximum outliers.  Max-90
shows that 90% of the stalls are comparable but the Max results show the
massive outliers which are increased to to stalling.

It is expected that this will be very machine dependant.  Due to the
test design, reclaim is difficult so allocations stall and there are
variances depending on whether THPs can be allocated or not.  The amount
of memory will affect exactly how bad the corner cases are and how often
they trigger.  The warmup period calculation is not ideal as it's based
on linear writes where as fio is randomly writing multiple files from
multiple tasks so the start state of the test is variable.  For example,
these are the latencies on a single-socket machine that had more memory

  Amean     mmap-4      42.2287 (   0.00%)     49.6838 * -17.65%*
  Amean     mmap-7     216.4326 (   0.00%)     47.4451 *  78.08%*
  Amean     mmap-12   2412.0588 (   0.00%)     51.7497 (  97.85%)
  Amean     mmap-21   5546.2548 (   0.00%)     51.8862 (  99.06%)
  Amean     mmap-30   1085.3121 (   0.00%)     72.1004 (  93.36%)

The overall system CPU usage and elapsed time is as follows

                    5.15.0-rc3  5.15.0-rc3
                       vanilla mm-reclaimcongest-v5r4
  Duration User        6989.03      983.42
  Duration System      7308.12      799.68
  Duration Elapsed     2277.67     2092.98

The patches reduce system CPU usage by 89% as the vanilla kernel is rarely
stalling.

The high-level /proc/vmstats show

                                       5.15.0-rc1     5.15.0-rc1
                                          vanilla mm-reclaimcongest-v5r2
  Ops Direct pages scanned          1056608451.00   503594991.00
  Ops Kswapd pages scanned           109795048.00   147289810.00
  Ops Kswapd pages reclaimed          63269243.00    31036005.00
  Ops Direct pages reclaimed          10803973.00     6328887.00
  Ops Kswapd efficiency %                   57.62          21.07
  Ops Kswapd velocity                    48204.98       57572.86
  Ops Direct efficiency %                    1.02           1.26
  Ops Direct velocity                   463898.83      196845.97

Kswapd scanned less pages but the detailed pattern is different.  The
vanilla kernel scans slowly over time where as the patches exhibits
burst patterns of scan activity.  Direct reclaim scanning is reduced by
52% due to stalling.

The pattern for stealing pages is also slightly different.  Both kernels
exhibit spikes but the vanilla kernel when reclaiming shows pages being
reclaimed over a period of time where as the patches tend to reclaim in
spikes.  The difference is that vanilla is not throttling and instead
scanning constantly finding some pages over time where as the patched
kernel throttles and reclaims in spikes.

  Ops Percentage direct scans               90.59          77.37

For direct reclaim, vanilla scanned 90.59% of pages where as with the
patches, 77.37% were direct reclaim due to throttling

  Ops Page writes by reclaim           2613590.00     1687131.00

Page writes from reclaim context are reduced.

  Ops Page writes anon                 2932752.00     1917048.00

And there is less swapping.

  Ops Page reclaim immediate         996248528.00   107664764.00

The number of pages encountered at the tail of the LRU tagged for
immediate reclaim but still dirty/writeback is reduced by 89%.

  Ops Slabs scanned                     164284.00      153608.00

Slab scan activity is similar.

ftrace was used to gather stall activity

  Vanilla
  -------
      1 writeback_wait_iff_congested: usec_timeout=100000 usec_delayed=16000
      2 writeback_wait_iff_congested: usec_timeout=100000 usec_delayed=12000
      8 writeback_wait_iff_congested: usec_timeout=100000 usec_delayed=8000
     29 writeback_wait_iff_congested: usec_timeout=100000 usec_delayed=4000
  82394 writeback_wait_iff_congested: usec_timeout=100000 usec_delayed=0

The fast majority of wait_iff_congested calls do not stall at all.  What
is likely happening is that cond_resched() reschedules the task for a
short period when the BDI is not registering congestion (which it never
will in this test setup).

      1 writeback_congestion_wait: usec_timeout=100000 usec_delayed=120000
      2 writeback_congestion_wait: usec_timeout=100000 usec_delayed=132000
      4 writeback_congestion_wait: usec_timeout=100000 usec_delayed=112000
    380 writeback_congestion_wait: usec_timeout=100000 usec_delayed=108000
    778 writeback_congestion_wait: usec_timeout=100000 usec_delayed=104000

congestion_wait if called always exceeds the timeout as there is no
trigger to wake it up.

Bottom line: Vanilla will throttle but it's not effective.

Patch series
------------

Kswapd throttle activity was always due to scanning pages tagged for
immediate reclaim at the tail of the LRU

      1 usec_timeout=100000 usect_delayed=72000 reason=VMSCAN_THROTTLE_WRITEBACK
      4 usec_timeout=100000 usect_delayed=20000 reason=VMSCAN_THROTTLE_WRITEBACK
      5 usec_timeout=100000 usect_delayed=12000 reason=VMSCAN_THROTTLE_WRITEBACK
      6 usec_timeout=100000 usect_delayed=16000 reason=VMSCAN_THROTTLE_WRITEBACK
     11 usec_timeout=100000 usect_delayed=100000 reason=VMSCAN_THROTTLE_WRITEBACK
     11 usec_timeout=100000 usect_delayed=8000 reason=VMSCAN_THROTTLE_WRITEBACK
     94 usec_timeout=100000 usect_delayed=0 reason=VMSCAN_THROTTLE_WRITEBACK
    112 usec_timeout=100000 usect_delayed=4000 reason=VMSCAN_THROTTLE_WRITEBACK

The majority of events did not stall or stalled for a short period.
Roughly 16% of stalls reached the timeout before expiry.  For direct
reclaim, the number of times stalled for each reason were

   6624 reason=VMSCAN_THROTTLE_ISOLATED
  93246 reason=VMSCAN_THROTTLE_NOPROGRESS
  96934 reason=VMSCAN_THROTTLE_WRITEBACK

The most common reason to stall was due to excessive pages tagged for
immediate reclaim at the tail of the LRU followed by a failure to make
forward.  A relatively small number were due to too many pages isolated
from the LRU by parallel threads

For VMSCAN_THROTTLE_ISOLATED, the breakdown of delays was

      9 usec_timeout=20000 usect_delayed=4000 reason=VMSCAN_THROTTLE_ISOLATED
     12 usec_timeout=20000 usect_delayed=16000 reason=VMSCAN_THROTTLE_ISOLATED
     83 usec_timeout=20000 usect_delayed=20000 reason=VMSCAN_THROTTLE_ISOLATED
   6520 usec_timeout=20000 usect_delayed=0 reason=VMSCAN_THROTTLE_ISOLATED

Most did not stall at all.  A small number reached the timeout.

For VMSCAN_THROTTLE_NOPROGRESS, the breakdown of stalls were all over
the map

      1 usec_timeout=500000 usect_delayed=324000 reason=VMSCAN_THROTTLE_NOPROGRESS
      1 usec_timeout=500000 usect_delayed=332000 reason=VMSCAN_THROTTLE_NOPROGRESS
      1 usec_timeout=500000 usect_delayed=348000 reason=VMSCAN_THROTTLE_NOPROGRESS
      1 usec_timeout=500000 usect_delayed=360000 reason=VMSCAN_THROTTLE_NOPROGRESS
      2 usec_timeout=500000 usect_delayed=228000 reason=VMSCAN_THROTTLE_NOPROGRESS
      2 usec_timeout=500000 usect_delayed=260000 reason=VMSCAN_THROTTLE_NOPROGRESS
      2 usec_timeout=500000 usect_delayed=340000 reason=VMSCAN_THROTTLE_NOPROGRESS
      2 usec_timeout=500000 usect_delayed=364000 reason=VMSCAN_THROTTLE_NOPROGRESS
      2 usec_timeout=500000 usect_delayed=372000 reason=VMSCAN_THROTTLE_NOPROGRESS
      2 usec_timeout=500000 usect_delayed=428000 reason=VMSCAN_THROTTLE_NOPROGRESS
      2 usec_timeout=500000 usect_delayed=460000 reason=VMSCAN_THROTTLE_NOPROGRESS
      2 usec_timeout=500000 usect_delayed=464000 reason=VMSCAN_THROTTLE_NOPROGRESS
      3 usec_timeout=500000 usect_delayed=244000 reason=VMSCAN_THROTTLE_NOPROGRESS
      3 usec_timeout=500000 usect_delayed=252000 reason=VMSCAN_THROTTLE_NOPROGRESS
      3 usec_timeout=500000 usect_delayed=272000 reason=VMSCAN_THROTTLE_NOPROGRESS
      4 usec_timeout=500000 usect_delayed=188000 reason=VMSCAN_THROTTLE_NOPROGRESS
      4 usec_timeout=500000 usect_delayed=268000 reason=VMSCAN_THROTTLE_NOPROGRESS
      4 usec_timeout=500000 usect_delayed=328000 reason=VMSCAN_THROTTLE_NOPROGRESS
      4 usec_timeout=500000 usect_delayed=380000 reason=VMSCAN_THROTTLE_NOPROGRESS
      4 usec_timeout=500000 usect_delayed=392000 reason=VMSCAN_THROTTLE_NOPROGRESS
      4 usec_timeout=500000 usect_delayed=432000 reason=VMSCAN_THROTTLE_NOPROGRESS
      5 usec_timeout=500000 usect_delayed=204000 reason=VMSCAN_THROTTLE_NOPROGRESS
      5 usec_timeout=500000 usect_delayed=220000 reason=VMSCAN_THROTTLE_NOPROGRESS
      5 usec_timeout=500000 usect_delayed=412000 reason=VMSCAN_THROTTLE_NOPROGRESS
      5 usec_timeout=500000 usect_delayed=436000 reason=VMSCAN_THROTTLE_NOPROGRESS
      6 usec_timeout=500000 usect_delayed=488000 reason=VMSCAN_THROTTLE_NOPROGRESS
      7 usec_timeout=500000 usect_delayed=212000 reason=VMSCAN_THROTTLE_NOPROGRESS
      7 usec_timeout=500000 usect_delayed=300000 reason=VMSCAN_THROTTLE_NOPROGRESS
      7 usec_timeout=500000 usect_delayed=316000 reason=VMSCAN_THROTTLE_NOPROGRESS
      7 usec_timeout=500000 usect_delayed=472000 reason=VMSCAN_THROTTLE_NOPROGRESS
      8 usec_timeout=500000 usect_delayed=248000 reason=VMSCAN_THROTTLE_NOPROGRESS
      8 usec_timeout=500000 usect_delayed=356000 reason=VMSCAN_THROTTLE_NOPROGRESS
      8 usec_timeout=500000 usect_delayed=456000 reason=VMSCAN_THROTTLE_NOPROGRESS
      9 usec_timeout=500000 usect_delayed=124000 reason=VMSCAN_THROTTLE_NOPROGRESS
      9 usec_timeout=500000 usect_delayed=376000 reason=VMSCAN_THROTTLE_NOPROGRESS
      9 usec_timeout=500000 usect_delayed=484000 reason=VMSCAN_THROTTLE_NOPROGRESS
     10 usec_timeout=500000 usect_delayed=172000 reason=VMSCAN_THROTTLE_NOPROGRESS
     10 usec_timeout=500000 usect_delayed=420000 reason=VMSCAN_THROTTLE_NOPROGRESS
     10 usec_timeout=500000 usect_delayed=452000 reason=VMSCAN_THROTTLE_NOPROGRESS
     11 usec_timeout=500000 usect_delayed=256000 reason=VMSCAN_THROTTLE_NOPROGRESS
     12 usec_timeout=500000 usect_delayed=112000 reason=VMSCAN_THROTTLE_NOPROGRESS
     12 usec_timeout=500000 usect_delayed=116000 reason=VMSCAN_THROTTLE_NOPROGRESS
     12 usec_timeout=500000 usect_delayed=144000 reason=VMSCAN_THROTTLE_NOPROGRESS
     12 usec_timeout=500000 usect_delayed=152000 reason=VMSCAN_THROTTLE_NOPROGRESS
     12 usec_timeout=500000 usect_delayed=264000 reason=VMSCAN_THROTTLE_NOPROGRESS
     12 usec_timeout=500000 usect_delayed=384000 reason=VMSCAN_THROTTLE_NOPROGRESS
     12 usec_timeout=500000 usect_delayed=424000 reason=VMSCAN_THROTTLE_NOPROGRESS
     12 usec_timeout=500000 usect_delayed=492000 reason=VMSCAN_THROTTLE_NOPROGRESS
     13 usec_timeout=500000 usect_delayed=184000 reason=VMSCAN_THROTTLE_NOPROGRESS
     13 usec_timeout=500000 usect_delayed=444000 reason=VMSCAN_THROTTLE_NOPROGRESS
     14 usec_timeout=500000 usect_delayed=308000 reason=VMSCAN_THROTTLE_NOPROGRESS
     14 usec_timeout=500000 usect_delayed=440000 reason=VMSCAN_THROTTLE_NOPROGRESS
     14 usec_timeout=500000 usect_delayed=476000 reason=VMSCAN_THROTTLE_NOPROGRESS
     16 usec_timeout=500000 usect_delayed=140000 reason=VMSCAN_THROTTLE_NOPROGRESS
     17 usec_timeout=500000 usect_delayed=232000 reason=VMSCAN_THROTTLE_NOPROGRESS
     17 usec_timeout=500000 usect_delayed=240000 reason=VMSCAN_THROTTLE_NOPROGRESS
     17 usec_timeout=500000 usect_delayed=280000 reason=VMSCAN_THROTTLE_NOPROGRESS
     18 usec_timeout=500000 usect_delayed=404000 reason=VMSCAN_THROTTLE_NOPROGRESS
     20 usec_timeout=500000 usect_delayed=148000 reason=VMSCAN_THROTTLE_NOPROGRESS
     20 usec_timeout=500000 usect_delayed=216000 reason=VMSCAN_THROTTLE_NOPROGRESS
     20 usec_timeout=500000 usect_delayed=468000 reason=VMSCAN_THROTTLE_NOPROGRESS
     21 usec_timeout=500000 usect_delayed=448000 reason=VMSCAN_THROTTLE_NOPROGRESS
     23 usec_timeout=500000 usect_delayed=168000 reason=VMSCAN_THROTTLE_NOPROGRESS
     23 usec_timeout=500000 usect_delayed=296000 reason=VMSCAN_THROTTLE_NOPROGRESS
     25 usec_timeout=500000 usect_delayed=132000 reason=VMSCAN_THROTTLE_NOPROGRESS
     25 usec_timeout=500000 usect_delayed=352000 reason=VMSCAN_THROTTLE_NOPROGRESS
     26 usec_timeout=500000 usect_delayed=180000 reason=VMSCAN_THROTTLE_NOPROGRESS
     27 usec_timeout=500000 usect_delayed=284000 reason=VMSCAN_THROTTLE_NOPROGRESS
     28 usec_timeout=500000 usect_delayed=164000 reason=VMSCAN_THROTTLE_NOPROGRESS
     29 usec_timeout=500000 usect_delayed=136000 reason=VMSCAN_THROTTLE_NOPROGRESS
     30 usec_timeout=500000 usect_delayed=200000 reason=VMSCAN_THROTTLE_NOPROGRESS
     30 usec_timeout=500000 usect_delayed=400000 reason=VMSCAN_THROTTLE_NOPROGRESS
     31 usec_timeout=500000 usect_delayed=196000 reason=VMSCAN_THROTTLE_NOPROGRESS
     32 usec_timeout=500000 usect_delayed=156000 reason=VMSCAN_THROTTLE_NOPROGRESS
     33 usec_timeout=500000 usect_delayed=224000 reason=VMSCAN_THROTTLE_NOPROGRESS
     35 usec_timeout=500000 usect_delayed=128000 reason=VMSCAN_THROTTLE_NOPROGRESS
     35 usec_timeout=500000 usect_delayed=176000 reason=VMSCAN_THROTTLE_NOPROGRESS
     36 usec_timeout=500000 usect_delayed=368000 reason=VMSCAN_THROTTLE_NOPROGRESS
     36 usec_timeout=500000 usect_delayed=496000 reason=VMSCAN_THROTTLE_NOPROGRESS
     37 usec_timeout=500000 usect_delayed=312000 reason=VMSCAN_THROTTLE_NOPROGRESS
     38 usec_timeout=500000 usect_delayed=304000 reason=VMSCAN_THROTTLE_NOPROGRESS
     40 usec_timeout=500000 usect_delayed=288000 reason=VMSCAN_THROTTLE_NOPROGRESS
     43 usec_timeout=500000 usect_delayed=408000 reason=VMSCAN_THROTTLE_NOPROGRESS
     55 usec_timeout=500000 usect_delayed=416000 reason=VMSCAN_THROTTLE_NOPROGRESS
     56 usec_timeout=500000 usect_delayed=76000 reason=VMSCAN_THROTTLE_NOPROGRESS
     58 usec_timeout=500000 usect_delayed=120000 reason=VMSCAN_THROTTLE_NOPROGRESS
     59 usec_timeout=500000 usect_delayed=208000 reason=VMSCAN_THROTTLE_NOPROGRESS
     61 usec_timeout=500000 usect_delayed=68000 reason=VMSCAN_THROTTLE_NOPROGRESS
     71 usec_timeout=500000 usect_delayed=192000 reason=VMSCAN_THROTTLE_NOPROGRESS
     71 usec_timeout=500000 usect_delayed=480000 reason=VMSCAN_THROTTLE_NOPROGRESS
     79 usec_timeout=500000 usect_delayed=60000 reason=VMSCAN_THROTTLE_NOPROGRESS
     82 usec_timeout=500000 usect_delayed=320000 reason=VMSCAN_THROTTLE_NOPROGRESS
     82 usec_timeout=500000 usect_delayed=92000 reason=VMSCAN_THROTTLE_NOPROGRESS
     85 usec_timeout=500000 usect_delayed=64000 reason=VMSCAN_THROTTLE_NOPROGRESS
     85 usec_timeout=500000 usect_delayed=80000 reason=VMSCAN_THROTTLE_NOPROGRESS
     88 usec_timeout=500000 usect_delayed=84000 reason=VMSCAN_THROTTLE_NOPROGRESS
     90 usec_timeout=500000 usect_delayed=160000 reason=VMSCAN_THROTTLE_NOPROGRESS
     90 usec_timeout=500000 usect_delayed=292000 reason=VMSCAN_THROTTLE_NOPROGRESS
     94 usec_timeout=500000 usect_delayed=56000 reason=VMSCAN_THROTTLE_NOPROGRESS
    118 usec_timeout=500000 usect_delayed=88000 reason=VMSCAN_THROTTLE_NOPROGRESS
    119 usec_timeout=500000 usect_delayed=72000 reason=VMSCAN_THROTTLE_NOPROGRESS
    126 usec_timeout=500000 usect_delayed=108000 reason=VMSCAN_THROTTLE_NOPROGRESS
    146 usec_timeout=500000 usect_delayed=52000 reason=VMSCAN_THROTTLE_NOPROGRESS
    148 usec_timeout=500000 usect_delayed=36000 reason=VMSCAN_THROTTLE_NOPROGRESS
    148 usec_timeout=500000 usect_delayed=48000 reason=VMSCAN_THROTTLE_NOPROGRESS
    159 usec_timeout=500000 usect_delayed=28000 reason=VMSCAN_THROTTLE_NOPROGRESS
    178 usec_timeout=500000 usect_delayed=44000 reason=VMSCAN_THROTTLE_NOPROGRESS
    183 usec_timeout=500000 usect_delayed=40000 reason=VMSCAN_THROTTLE_NOPROGRESS
    237 usec_timeout=500000 usect_delayed=100000 reason=VMSCAN_THROTTLE_NOPROGRESS
    266 usec_timeout=500000 usect_delayed=32000 reason=VMSCAN_THROTTLE_NOPROGRESS
    313 usec_timeout=500000 usect_delayed=24000 reason=VMSCAN_THROTTLE_NOPROGRESS
    347 usec_timeout=500000 usect_delayed=96000 reason=VMSCAN_THROTTLE_NOPROGRESS
    470 usec_timeout=500000 usect_delayed=20000 reason=VMSCAN_THROTTLE_NOPROGRESS
    559 usec_timeout=500000 usect_delayed=16000 reason=VMSCAN_THROTTLE_NOPROGRESS
    964 usec_timeout=500000 usect_delayed=12000 reason=VMSCAN_THROTTLE_NOPROGRESS
   2001 usec_timeout=500000 usect_delayed=104000 reason=VMSCAN_THROTTLE_NOPROGRESS
   2447 usec_timeout=500000 usect_delayed=8000 reason=VMSCAN_THROTTLE_NOPROGRESS
   7888 usec_timeout=500000 usect_delayed=4000 reason=VMSCAN_THROTTLE_NOPROGRESS
  22727 usec_timeout=500000 usect_delayed=0 reason=VMSCAN_THROTTLE_NOPROGRESS
  51305 usec_timeout=500000 usect_delayed=500000 reason=VMSCAN_THROTTLE_NOPROGRESS

The full timeout is often hit but a large number also do not stall at
all.  The remainder slept a little allowing other reclaim tasks to make
progress.

While this timeout could be further increased, it could also negatively
impact worst-case behaviour when there is no prioritisation of what task
should make progress.

For VMSCAN_THROTTLE_WRITEBACK, the breakdown was

      1 usec_timeout=100000 usect_delayed=44000 reason=VMSCAN_THROTTLE_WRITEBACK
      2 usec_timeout=100000 usect_delayed=76000 reason=VMSCAN_THROTTLE_WRITEBACK
      3 usec_timeout=100000 usect_delayed=80000 reason=VMSCAN_THROTTLE_WRITEBACK
      5 usec_timeout=100000 usect_delayed=48000 reason=VMSCAN_THROTTLE_WRITEBACK
      5 usec_timeout=100000 usect_delayed=84000 reason=VMSCAN_THROTTLE_WRITEBACK
      6 usec_timeout=100000 usect_delayed=72000 reason=VMSCAN_THROTTLE_WRITEBACK
      7 usec_timeout=100000 usect_delayed=88000 reason=VMSCAN_THROTTLE_WRITEBACK
     11 usec_timeout=100000 usect_delayed=56000 reason=VMSCAN_THROTTLE_WRITEBACK
     12 usec_timeout=100000 usect_delayed=64000 reason=VMSCAN_THROTTLE_WRITEBACK
     16 usec_timeout=100000 usect_delayed=92000 reason=VMSCAN_THROTTLE_WRITEBACK
     24 usec_timeout=100000 usect_delayed=68000 reason=VMSCAN_THROTTLE_WRITEBACK
     28 usec_timeout=100000 usect_delayed=32000 reason=VMSCAN_THROTTLE_WRITEBACK
     30 usec_timeout=100000 usect_delayed=60000 reason=VMSCAN_THROTTLE_WRITEBACK
     30 usec_timeout=100000 usect_delayed=96000 reason=VMSCAN_THROTTLE_WRITEBACK
     32 usec_timeout=100000 usect_delayed=52000 reason=VMSCAN_THROTTLE_WRITEBACK
     42 usec_timeout=100000 usect_delayed=40000 reason=VMSCAN_THROTTLE_WRITEBACK
     77 usec_timeout=100000 usect_delayed=28000 reason=VMSCAN_THROTTLE_WRITEBACK
     99 usec_timeout=100000 usect_delayed=36000 reason=VMSCAN_THROTTLE_WRITEBACK
    137 usec_timeout=100000 usect_delayed=24000 reason=VMSCAN_THROTTLE_WRITEBACK
    190 usec_timeout=100000 usect_delayed=20000 reason=VMSCAN_THROTTLE_WRITEBACK
    339 usec_timeout=100000 usect_delayed=16000 reason=VMSCAN_THROTTLE_WRITEBACK
    518 usec_timeout=100000 usect_delayed=12000 reason=VMSCAN_THROTTLE_WRITEBACK
    852 usec_timeout=100000 usect_delayed=8000 reason=VMSCAN_THROTTLE_WRITEBACK
   3359 usec_timeout=100000 usect_delayed=4000 reason=VMSCAN_THROTTLE_WRITEBACK
   7147 usec_timeout=100000 usect_delayed=0 reason=VMSCAN_THROTTLE_WRITEBACK
  83962 usec_timeout=100000 usect_delayed=100000 reason=VMSCAN_THROTTLE_WRITEBACK

The majority hit the timeout in direct reclaim context although a
sizable number did not stall at all.  This is very different to kswapd
where only a tiny percentage of stalls due to writeback reached the
timeout.

Bottom line, the throttling appears to work and the wakeup events may
limit worst case stalls.  There might be some grounds for adjusting
timeouts but it's likely futile as the worst-case scenarios depend on
the workload, memory size and the speed of the storage.  A better
approach to improve the series further would be to prioritise tasks
based on their rate of allocation with the caveat that it may be very
expensive to track.

This patch (of 5):

Page reclaim throttles on wait_iff_congested under the following
conditions:

 - kswapd is encountering pages under writeback and marked for immediate
   reclaim implying that pages are cycling through the LRU faster than
   pages can be cleaned.

 - Direct reclaim will stall if all dirty pages are backed by congested
   inodes.

wait_iff_congested is almost completely broken with few exceptions.
This patch adds a new node-based workqueue and tracks the number of
throttled tasks and pages written back since throttling started.  If
enough pages belonging to the node are written back then the throttled
tasks will wake early.  If not, the throttled tasks sleeps until the
timeout expires.

[neilb@suse.de: Uninterruptible sleep and simpler wakeups]
[hdanton@sina.com: Avoid race when reclaim starts]
[vbabka@suse.cz: vmstat irq-safe api, clarifications]

Link: https://lore.kernel.org/linux-mm/45d8b7a6-8548-65f5-cccf-9f451d4ae3d4@kernel.dk/ [1]
Link: https://lkml.kernel.org/r/20211022144651.19914-1-mgorman@techsingularity.net
Link: https://lkml.kernel.org/r/20211022144651.19914-2-mgorman@techsingularity.net
Signed-off-by: Mel Gorman 
Acked-by: Vlastimil Babka 
Cc: NeilBrown 
Cc: "Theodore Ts'o" 
Cc: Andreas Dilger 
Cc: "Darrick J . Wong" 
Cc: Matthew Wilcox 
Cc: Michal Hocko 
Cc: Dave Chinner 
Cc: Rik van Riel 
Cc: Johannes Weiner 
Cc: Jonathan Corbet 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: filemap: coding style cleanup for filemap_map_pmd()

2021-11-06T20:30:38+00:00

Patch series "Solve silent data loss caused by poisoned page cache (shmem/tmpfs)", v5.

When discussing the patch that splits page cache THP in order to offline
the poisoned page, Noaya mentioned there is a bigger problem [1] that
prevents this from working since the page cache page will be truncated
if uncorrectable errors happen.  By looking this deeper it turns out
this approach (truncating poisoned page) may incur silent data loss for
all non-readonly filesystems if the page is dirty.  It may be worse for
in-memory filesystem, e.g.  shmem/tmpfs since the data blocks are
actually gone.

To solve this problem we could keep the poisoned dirty page in page
cache then notify the users on any later access, e.g.  page fault,
read/write, etc.  The clean page could be truncated as is since they can
be reread from disk later on.

The consequence is the filesystems may find poisoned page and manipulate
it as healthy page since all the filesystems actually don't check if the
page is poisoned or not in all the relevant paths except page fault.  In
general, we need make the filesystems be aware of poisoned page before
we could keep the poisoned page in page cache in order to solve the data
loss problem.

To make filesystems be aware of poisoned page we should consider:

 - The page should be not written back: clearing dirty flag could
   prevent from writeback.

 - The page should not be dropped (it shows as a clean page) by drop
   caches or other callers: the refcount pin from hwpoison could prevent
   from invalidating (called by cache drop, inode cache shrinking, etc),
   but it doesn't avoid invalidation in DIO path.

 - The page should be able to get truncated/hole punched/unlinked: it
   works as it is.

 - Notify users when the page is accessed, e.g. read/write, page fault
   and other paths (compression, encryption, etc).

The scope of the last one is huge since almost all filesystems need do
it once a page is returned from page cache lookup.  There are a couple
of options to do it:

 1. Check hwpoison flag for every path, the most straightforward way.

 2. Return NULL for poisoned page from page cache lookup, the most
    callsites check if NULL is returned, this should have least work I
    think. But the error handling in filesystems just return -ENOMEM,
    the error code will incur confusion to the users obviously.

 3. To improve #2, we could return error pointer, e.g. ERR_PTR(-EIO),
    but this will involve significant amount of code change as well
    since all the paths need check if the pointer is ERR or not just
    like option #1.

I did prototypes for both #1 and #3, but it seems #3 may require more
changes than #1.  For #3 ERR_PTR will be returned so all the callers
need to check the return value otherwise invalid pointer may be
dereferenced, but not all callers really care about the content of the
page, for example, partial truncate which just sets the truncated range
in one page to 0.  So for such paths it needs additional modification if
ERR_PTR is returned.  And if the callers have their own way to handle
the problematic pages we need to add a new FGP flag to tell FGP
functions to return the pointer to the page.

It may happen very rarely, but once it happens the consequence (data
corruption) could be very bad and it is very hard to debug.  It seems
this problem had been slightly discussed before, but seems no action was
taken at that time.  [2]

As the aforementioned investigation, it needs huge amount of work to
solve the potential data loss for all filesystems.  But it is much
easier for in-memory filesystems and such filesystems actually suffer
more than others since even the data blocks are gone due to truncating.
So this patchset starts from shmem/tmpfs by taking option #1.

TODO:
* The unpoison has been broken since commit 0ed950d1f281 ("mm,hwpoison: make
  get_hwpoison_page() call get_any_page()"), and this patch series make
  refcount check for unpoisoning shmem page fail.
* Expand to other filesystems.  But I haven't heard feedback from filesystem
  developers yet.

Patch breakdown:
Patch #1: cleanup, depended by patch #2
Patch #2: fix THP with hwpoisoned subpage(s) PMD map bug
Patch #3: coding style cleanup
Patch #4: refactor and preparation.
Patch #5: keep the poisoned page in page cache and handle such case for all
          the paths.
Patch #6: the previous patches unblock page cache THP split, so this patch
          add page cache THP split support.

This patch (of 4):

A minor cleanup to the indent.

Link: https://lkml.kernel.org/r/20211020210755.23964-1-shy828301@gmail.com
Link: https://lkml.kernel.org/r/20211020210755.23964-4-shy828301@gmail.com
Signed-off-by: Yang Shi 
Reviewed-by: Naoya Horiguchi 
Cc: Hugh Dickins 
Cc: Kirill A. Shutemov 
Cc: Matthew Wilcox 
Cc: Oscar Salvador 
Cc: Peter Xu 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: introduce pmd_install() helper

2021-11-06T20:30:36+00:00

Patch series "Do some code cleanups related to mm", v3.

This patch (of 2):

Currently we have three times the same few lines repeated in the code.
Deduplicate them by newly introduced pmd_install() helper.

Link: https://lkml.kernel.org/r/20210901102722.47686-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20210901102722.47686-2-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng 
Reviewed-by: David Hildenbrand 
Reviewed-by: Muchun Song 
Acked-by: Kirill A. Shutemov 
Cc: Thomas Gleixner 
Cc: Johannes Weiner 
Cc: Michal Hocko 
Cc: Vladimir Davydov 
Cc: Mika Penttila 
Cc: Vlastimil Babka 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: move more expensive part of XA setup out of mapping check

2021-11-06T20:30:34+00:00

The fast path here is not needing any writeback, yet we spend time
setting up the xarray lookup data upfront.  Move the part that actually
needs to iterate the address space mapping into a separate helper,
saving ~30% of the time here.

Link: https://lkml.kernel.org/r/49f67983-b802-8929-edab-d807f745c9ca@kernel.dk
Signed-off-by: Jens Axboe 
Cc: Matthew Wilcox 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm/filemap.c: remove bogus VM_BUG_ON

2021-11-06T20:30:34+00:00

It is not safe to check page->index without holding the page lock.  It
can be changed if the page is moved between the swap cache and the page
cache for a shmem file, for example.  There is a VM_BUG_ON below which
checks page->index is correct after taking the page lock.

Link: https://lkml.kernel.org/r/20210818144932.940640-1-willy@infradead.org
Fixes: 5c211ba29deb ("mm: add and use find_lock_entries")
Signed-off-by: Matthew Wilcox (Oracle) 
Reported-by: 
Cc: Hugh Dickins 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: don't read i_size of inode unless we need it

2021-11-06T20:30:34+00:00

We always go through i_size_read(), and we rarely end up needing it.
Push the read to down where we need to check it, which avoids it for
most cases.

It looks like we can even remove this check entirely, which might be
worth pursuing.  But at least this takes it out of the hot path.

Link: https://lkml.kernel.org/r/6b67981f-57d4-c80e-bc07-6020aa601381@kernel.dk
Signed-off-by: Jens Axboe 
Acked-by: Chris Mason 
Cc: Josef Bacik 
Cc: Dave Chinner 
Cc: Pavel Begunkov 
Cc: Jan Kara 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds