linux-toradex.git/mm/mremap.c, branch v2.6.16.42

[PATCH] move capable() to capability.h

2006-01-12T02:42:13+00:00

- Move capable() from sched.h to capability.h;

- Use  where capable() is used
	(in include/, block/, ipc/, kernel/, a few drivers/,
	mm/, security/, & sound/;
	many more drivers/ to go)

Signed-off-by: Randy Dunlap 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Make sure we copy pages inserted with "vm_insert_page()" on fork

2005-12-16T18:21:23+00:00

The logic that decides that a fork() might be able to avoid copying a VM
area when it can be re-created by page faults didn't know about the new
vm_insert_page() case.

Also make some things a bit more anal wrt VM_PFNMAP.

Pointed out by Hugh Dickins 

Signed-off-by: Linus Torvalds

[PATCH] mm: split page table lock

2005-10-30T04:40:42+00:00

Christoph Lameter demonstrated very poor scalability on the SGI 512-way, with
a many-threaded application which concurrently initializes different parts of
a large anonymous area.

This patch corrects that, by using a separate spinlock per page table page, to
guard the page table entries in that page, instead of using the mm's single
page_table_lock.  (But even then, page_table_lock is still used to guard page
table allocation, and anon_vma allocation.)

In this implementation, the spinlock is tucked inside the struct page of the
page table page: with a BUILD_BUG_ON in case it overflows - which it would in
the case of 32-bit PA-RISC with spinlock debugging enabled.

Splitting the lock is not quite for free: another cacheline access.  Ideally,
I suppose we would use split ptlock only for multi-threaded processes on
multi-cpu machines; but deciding that dynamically would have its own costs.
So for now enable it by config, at some number of cpus - since the Kconfig
language doesn't support inequalities, let preprocessor compare that with
NR_CPUS.  But I don't think it's worth being user-configurable: for good
testing of both split and unsplit configs, split now at 4 cpus, and perhaps
change that to 8 later.

There is a benefit even for singly threaded processes: kswapd can be attacking
one part of the mm while another part is busy faulting.

Signed-off-by: Hugh Dickins 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] mm: ptd_alloc take ptlock

2005-10-30T04:40:40+00:00

Second step in pushing down the page_table_lock.  Remove the temporary
bridging hack from __pud_alloc, __pmd_alloc, __pte_alloc: expect callers not
to hold page_table_lock, whether it's on init_mm or a user mm; take
page_table_lock internally to check if a racing task already allocated.

Convert their callers from common code.  But avoid coming back to change them
again later: instead of moving the spin_lock(&mm->page_table_lock) down,
switch over to new macros pte_alloc_map_lock and pte_unmap_unlock, which
encapsulate the mapping+locking and unlocking+unmapping together, and in the
end may use alternatives to the mm page_table_lock itself.

These callers all hold mmap_sem (some exclusively, some not), so at no level
can a page table be whipped away from beneath them; and pte_alloc uses the
"atomic" pmd_present to test whether it needs to allocate.  It appears that on
all arches we can safely descend without page_table_lock.

Signed-off-by: Hugh Dickins 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] mm: ptd_alloc inline and out

2005-10-30T04:40:40+00:00

It seems odd to me that, whereas pud_alloc and pmd_alloc test inline, only
calling out-of-line __pud_alloc __pmd_alloc if allocation needed,
pte_alloc_map and pte_alloc_kernel are entirely out-of-line.  Though it does
add a little to kernel size, change them to macros testing inline, calling
__pte_alloc or __pte_alloc_kernel to allocate out-of-line.  Mark none of them
as fastcalls, leave that to CONFIG_REGPARM or not.

It also seems more natural for the out-of-line functions to leave the offset
calculation and map to the inline, which has to do it anyway for the common
case.  At least mremap move wants __pte_alloc without _map.

Macros rather than inline functions, certainly to avoid the header file issues
which arise from CONFIG_HIGHPTE needing kmap_types.h, but also in case any
architectures I haven't built would have other such problems.

Signed-off-by: Hugh Dickins 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] mm: update_hiwaters just in time

2005-10-30T04:40:39+00:00

update_mem_hiwater has attracted various criticisms, in particular from those
concerned with mm scalability.  Originally it was called whenever rss or
total_vm got raised.  Then many of those callsites were replaced by a timer
tick call from account_system_time.  Now Frank van Maarseveen reports that to
be found inadequate.  How about this?  Works for Frank.

Replace update_mem_hiwater, a poor combination of two unrelated ops, by macros
update_hiwater_rss and update_hiwater_vm.  Don't attempt to keep
mm->hiwater_rss up to date at timer tick, nor every time we raise rss (usually
by 1): those are hot paths.  Do the opposite, update only when about to lower
rss (usually by many), or just before final accounting in do_exit.  Handle
mm->hiwater_vm in the same way, though it's much less of an issue.  Demand
that whoever collects these hiwater statistics do the work of taking the
maximum with rss or total_vm.

And there has been no collector of these hiwater statistics in the tree.  The
new convention needs an example, so match Frank's usage by adding a VmPeak
line above VmSize to /proc//status, and also a VmHWM line above VmRSS
(High-Water-Mark or High-Water-Memory).

There was a particular anomaly during mremap move, that hiwater_vm might be
captured too high.  A fleeting such anomaly remains, but it's quickly
corrected now, whereas before it would stick.

What locking?  None: if the app is racy then these statistics will be racy,
it's not worth any overhead to make them exact.  But whenever it suits,
hiwater_vm is updated under exclusive mmap_sem, and hiwater_rss under
page_table_lock (for now) or with preemption disabled (later on): without
going to any trouble, minimize the time between reading current values and
updating, to minimize those occasions when a racing thread bumps a count up
and back down in between.

Signed-off-by: Hugh Dickins 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] mm: do_mremap current mm

2005-10-30T04:40:39+00:00

Cleanup: relieve do_mremap from its surfeit of current->mms.

Signed-off-by: Hugh Dickins 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] mm: move_page_tables by extents

2005-10-30T04:40:37+00:00

Speeding up mremap's moving of ptes has never been a priority, but the locking
will get more complicated shortly, and is already too baroque.

Scrap the current one-by-one moving, do an extent at a time: curtailed by end
of src and dst pmds (have to use PMD_SIZE: the way pmd_addr_end gets elided
doesn't match this usage), and by latency considerations.

One nice property of the old method is lost: it never allocated a page table
unless absolutely necessary, so you could free empty page tables by mremapping
to and fro.  Whereas this way, it allocates a dst table wherever there was a
src table.  I keep diving in to reinstate the old behaviour, then come out
preferring not to clutter how it now is.

Signed-off-by: Hugh Dickins 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] mm: vm_stat_account unshackled

2005-10-30T04:40:37+00:00

The original vm_stat_account has fallen into disuse, with only one user, and
only one user of vm_stat_unaccount.  It's easier to keep track if we convert
them all to __vm_stat_account, then free it from its __shackles.

Signed-off-by: Hugh Dickins 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] mm: move_pte to remap ZERO_PAGE

2005-09-28T14:46:40+00:00

Move the ZERO_PAGE remapping complexity to the move_pte macro in
asm-generic, have it conditionally depend on
__HAVE_ARCH_MULTIPLE_ZERO_PAGE, which gets defined for MIPS.

For architectures without __HAVE_ARCH_MULTIPLE_ZERO_PAGE, move_pte becomes
a noop.

From: Hugh Dickins 

Fix nasty little bug we've missed in Nick's mremap move ZERO_PAGE patch.
The "pte" at that point may be a swap entry or a pte_file entry: we must
check pte_present before perhaps corrupting such an entry.

Patch below against 2.6.14-rc2-mm1, but the same bug is in 2.6.14-rc2's
mm/mremap.c, and more dangerous there since it's affecting all arches: I
think the safest course is to send Nick's patch and Yoichi's build fix and
this fix (build tested) on to Linus - so only MIPS can be affected.

Signed-off-by: Nick Piggin 
Signed-off-by: Hugh Dickins 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds