linux-toradex.git/mm/rmap.c, branch v2.6.27.31

anon_vma_prepare: properly lock even newly allocated entries

2008-10-25T21:32:41+00:00

commit d9d332e0874f46b91d8ac4604b68ee42b8a7a2c6 upstream

The anon_vma code is very subtle, and we end up doing optimistic lookups
of anon_vmas under RCU in page_lock_anon_vma() with no locking.  Other
CPU's can also see the newly allocated entry immediately after we've
exposed it by setting "vma->anon_vma" to the new value.

We protect against the anon_vma being destroyed by having the SLAB
marked as SLAB_DESTROY_BY_RCU, so the RCU lookup can depend on the
allocation not being destroyed - but it might still be free'd and
re-allocated here to a new vma.

As a result, we should not do the anon_vma list ops on a newly allocated
vma without proper locking.

Acked-by: Nick Piggin 
Acked-by: Hugh Dickins 
Acked-by: Peter Zijlstra 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

mm: dirty page tracking race fix

2008-08-20T22:40:32+00:00

There is a race with dirty page accounting where a page may not properly
be accounted for.

clear_page_dirty_for_io() calls page_mkclean; then TestClearPageDirty.

page_mkclean walks the rmaps for that page, and for each one it cleans and
write protects the pte if it was dirty.  It uses page_check_address to
find the pte.  That function has a shortcut to avoid the ptl if the pte is
not present.  Unfortunately, the pte can be switched to not-present then
back to present by other code while holding the page table lock -- this
should not be a signal for page_mkclean to ignore that pte, because it may
be dirty.

For example, powerpc64's set_pte_at will clear a previously present pte
before setting it to the desired value.  There may also be other code in
core mm or in arch which do similar things.

The consequence of the bug is loss of data integrity due to msync, and
loss of dirty page accounting accuracy.  XIP's __xip_unmap could easily
also be unreliable (depending on the exact XIP locking scheme), which can
lead to data corruption.

Fix this by having an option to always take ptl to check the pte in
page_check_address.

It's possible to retain this optimization for page_referenced and
try_to_unmap.

Signed-off-by: Nick Piggin 
Cc: Jared Hulbert 
Cc: Carsten Otte 
Cc: Hugh Dickins 
Acked-by: Peter Zijlstra 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: page_remove_rmap comments on PageAnon

2008-08-20T22:40:30+00:00

Add a comment to s390's page_test_dirty/page_clear_dirty/page_set_dirty
dance in page_remove_rmap(): I was wrong to think the PageSwapCache test
could be avoided, and would like a comment in there to remind me.  And
mention s390, to help us remember that this block is not really common.

Also move down the "It would be tidy to reset PageAnon" comment: it does
not belong to s390's block, and it would be unwise to reset PageAnon
before we're done with testing it.

Signed-off-by: Hugh Dickins 
Acked-by: Martin Schwidefsky 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: rename page trylock

2008-08-05T04:31:34+00:00

Converting page lock to new locking bitops requires a change of page flag
operation naming, so we might as well convert it to something nicer
(!TestSetPageLocked_Lock => trylock_page, SetPageLocked => set_page_locked).

This also facilitates lockdeping of page lock.

Signed-off-by: Nick Piggin 
Acked-by: KOSAKI Motohiro 
Acked-by: Peter Zijlstra 
Acked-by: Andrew Morton 
Acked-by: Benjamin Herrenschmidt 
Signed-off-by: Linus Torvalds

[S390] Optimize storage key operations for anon pages

2008-08-01T14:39:30+00:00

For anonymous pages without a swap cache backing the check in
page_remove_rmap for the physical dirty bit in page_remove_rmap is
unnecessary. The instructions that are used to check and reset the dirty
bit are expensive. Removing the check noticably speeds up process exit.
In addition the clearing of the dirty bit in __SetPageUptodate is
pointless as well. With these two changes there is no storage key
operation for an anonymous page anymore if it does not hit the swap
space.

The micro benchmark which repeatedly executes an empty shell script
gets about 5% faster.

Signed-off-by: Martin Schwidefsky

mmu-notifiers: core

2008-07-28T23:30:21+00:00

With KVM/GFP/XPMEM there isn't just the primary CPU MMU pointing to pages.
 There are secondary MMUs (with secondary sptes and secondary tlbs) too.
sptes in the kvm case are shadow pagetables, but when I say spte in
mmu-notifier context, I mean "secondary pte".  In GRU case there's no
actual secondary pte and there's only a secondary tlb because the GRU
secondary MMU has no knowledge about sptes and every secondary tlb miss
event in the MMU always generates a page fault that has to be resolved by
the CPU (this is not the case of KVM where the a secondary tlb miss will
walk sptes in hardware and it will refill the secondary tlb transparently
to software if the corresponding spte is present).  The same way
zap_page_range has to invalidate the pte before freeing the page, the spte
(and secondary tlb) must also be invalidated before any page is freed and
reused.

Currently we take a page_count pin on every page mapped by sptes, but that
means the pages can't be swapped whenever they're mapped by any spte
because they're part of the guest working set.  Furthermore a spte unmap
event can immediately lead to a page to be freed when the pin is released
(so requiring the same complex and relatively slow tlb_gather smp safe
logic we have in zap_page_range and that can be avoided completely if the
spte unmap event doesn't require an unpin of the page previously mapped in
the secondary MMU).

The mmu notifiers allow kvm/GRU/XPMEM to attach to the tsk->mm and know
when the VM is swapping or freeing or doing anything on the primary MMU so
that the secondary MMU code can drop sptes before the pages are freed,
avoiding all page pinning and allowing 100% reliable swapping of guest
physical address space.  Furthermore it avoids the code that teardown the
mappings of the secondary MMU, to implement a logic like tlb_gather in
zap_page_range that would require many IPI to flush other cpu tlbs, for
each fixed number of spte unmapped.

To make an example: if what happens on the primary MMU is a protection
downgrade (from writeable to wrprotect) the secondary MMU mappings will be
invalidated, and the next secondary-mmu-page-fault will call
get_user_pages and trigger a do_wp_page through get_user_pages if it
called get_user_pages with write=1, and it'll re-establishing an updated
spte or secondary-tlb-mapping on the copied page.  Or it will setup a
readonly spte or readonly tlb mapping if it's a guest-read, if it calls
get_user_pages with write=0.  This is just an example.

This allows to map any page pointed by any pte (and in turn visible in the
primary CPU MMU), into a secondary MMU (be it a pure tlb like GRU, or an
full MMU with both sptes and secondary-tlb like the shadow-pagetable layer
with kvm), or a remote DMA in software like XPMEM (hence needing of
schedule in XPMEM code to send the invalidate to the remote node, while no
need to schedule in kvm/gru as it's an immediate event like invalidating
primary-mmu pte).

At least for KVM without this patch it's impossible to swap guests
reliably.  And having this feature and removing the page pin allows
several other optimizations that simplify life considerably.

Dependencies:

1) mm_take_all_locks() to register the mmu notifier when the whole VM
   isn't doing anything with "mm".  This allows mmu notifier users to keep
   track if the VM is in the middle of the invalidate_range_begin/end
   critical section with an atomic counter incraese in range_begin and
   decreased in range_end.  No secondary MMU page fault is allowed to map
   any spte or secondary tlb reference, while the VM is in the middle of
   range_begin/end as any page returned by get_user_pages in that critical
   section could later immediately be freed without any further
   ->invalidate_page notification (invalidate_range_begin/end works on
   ranges and ->invalidate_page isn't called immediately before freeing
   the page).  To stop all page freeing and pagetable overwrites the
   mmap_sem must be taken in write mode and all other anon_vma/i_mmap
   locks must be taken too.

2) It'd be a waste to add branches in the VM if nobody could possibly
   run KVM/GRU/XPMEM on the kernel, so mmu notifiers will only enabled if
   CONFIG_KVM=m/y.  In the current kernel kvm won't yet take advantage of
   mmu notifiers, but this already allows to compile a KVM external module
   against a kernel with mmu notifiers enabled and from the next pull from
   kvm.git we'll start using them.  And GRU/XPMEM will also be able to
   continue the development by enabling KVM=m in their config, until they
   submit all GRU/XPMEM GPLv2 code to the mainline kernel.  Then they can
   also enable MMU_NOTIFIERS in the same way KVM does it (even if KVM=n).
   This guarantees nobody selects MMU_NOTIFIER=y if KVM and GRU and XPMEM
   are all =n.

The mmu_notifier_register call can fail because mm_take_all_locks may be
interrupted by a signal and return -EINTR.  Because mmu_notifier_reigster
is used when a driver startup, a failure can be gracefully handled.  Here
an example of the change applied to kvm to register the mmu notifiers.
Usually when a driver startups other allocations are required anyway and
-ENOMEM failure paths exists already.

 struct  kvm *kvm_arch_create_vm(void)
 {
        struct kvm *kvm = kzalloc(sizeof(struct kvm), GFP_KERNEL);
+       int err;

        if (!kvm)
                return ERR_PTR(-ENOMEM);

        INIT_LIST_HEAD(&kvm->arch.active_mmu_pages);

+       kvm->arch.mmu_notifier.ops = &kvm_mmu_notifier_ops;
+       err = mmu_notifier_register(&kvm->arch.mmu_notifier, current->mm);
+       if (err) {
+               kfree(kvm);
+               return ERR_PTR(err);
+       }
+
        return kvm;
 }

mmu_notifier_unregister returns void and it's reliable.

The patch also adds a few needed but missing includes that would prevent
kernel to compile after these changes on non-x86 archs (x86 didn't need
them by luck).

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix mm/filemap_xip.c build]
[akpm@linux-foundation.org: fix mm/mmu_notifier.c build]
Signed-off-by: Andrea Arcangeli 
Signed-off-by: Nick Piggin 
Signed-off-by: Christoph Lameter 
Cc: Jack Steiner 
Cc: Robin Holt 
Cc: Nick Piggin 
Cc: Peter Zijlstra 
Cc: Kanoj Sarcar 
Cc: Roland Dreier 
Cc: Steve Wise 
Cc: Avi Kivity 
Cc: Hugh Dickins 
Cc: Rusty Russell 
Cc: Anthony Liguori 
Cc: Chris Wright 
Cc: Marcelo Tosatti 
Cc: Eric Dumazet 
Cc: "Paul E. McKenney" 
Cc: Izik Eidus 
Cc: Anthony Liguori 
Cc: Rik van Riel 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

SL*B: drop kmem cache argument from constructor

2008-07-26T19:00:07+00:00

Kmem cache passed to constructor is only needed for constructors that are
themselves multiplexeres.  Nobody uses this "feature", nor does anybody uses
passed kmem cache in non-trivial way, so pass only pointer to object.

Non-trivial places are:
	arch/powerpc/mm/init_64.c
	arch/powerpc/mm/hugetlbpage.c

This is flag day, yes.

Signed-off-by: Alexey Dobriyan 
Acked-by: Pekka Enberg 
Acked-by: Christoph Lameter 
Cc: Jon Tollefson 
Cc: Nick Piggin 
Cc: Matt Mackall 
[akpm@linux-foundation.org: fix arch/powerpc/mm/hugetlbpage.c]
[akpm@linux-foundation.org: fix mm/slab.c]
[akpm@linux-foundation.org: fix ubifs]
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

memcg: remove refcnt from page_cgroup

2008-07-25T17:53:37+00:00

memcg: performance improvements

Patch Description
 1/5 ... remove refcnt fron page_cgroup patch (shmem handling is fixed)
 2/5 ... swapcache handling patch
 3/5 ... add helper function for shmem's memory reclaim patch
 4/5 ... optimize by likely/unlikely ppatch
 5/5 ... remove redundunt check patch (shmem handling is fixed.)

Unix bench result.

== 2.6.26-rc2-mm1 + memory resource controller
Execl Throughput                           2915.4 lps   (29.6 secs, 3 samples)
C Compiler Throughput                      1019.3 lpm   (60.0 secs, 3 samples)
Shell Scripts (1 concurrent)               5796.0 lpm   (60.0 secs, 3 samples)
Shell Scripts (8 concurrent)               1097.7 lpm   (60.0 secs, 3 samples)
Shell Scripts (16 concurrent)               565.3 lpm   (60.0 secs, 3 samples)
File Read 1024 bufsize 2000 maxblocks    1022128.0 KBps  (30.0 secs, 3 samples)
File Write 1024 bufsize 2000 maxblocks   544057.0 KBps  (30.0 secs, 3 samples)
File Copy 1024 bufsize 2000 maxblocks    346481.0 KBps  (30.0 secs, 3 samples)
File Read 256 bufsize 500 maxblocks      319325.0 KBps  (30.0 secs, 3 samples)
File Write 256 bufsize 500 maxblocks     148788.0 KBps  (30.0 secs, 3 samples)
File Copy 256 bufsize 500 maxblocks       99051.0 KBps  (30.0 secs, 3 samples)
File Read 4096 bufsize 8000 maxblocks    2058917.0 KBps  (30.0 secs, 3 samples)
File Write 4096 bufsize 8000 maxblocks   1606109.0 KBps  (30.0 secs, 3 samples)
File Copy 4096 bufsize 8000 maxblocks    854789.0 KBps  (30.0 secs, 3 samples)
Dc: sqrt(2) to 99 decimal places         126145.2 lpm   (30.0 secs, 3 samples)

                     INDEX VALUES
TEST                                        BASELINE     RESULT      INDEX

Execl Throughput                                43.0     2915.4      678.0
File Copy 1024 bufsize 2000 maxblocks         3960.0   346481.0      875.0
File Copy 256 bufsize 500 maxblocks           1655.0    99051.0      598.5
File Copy 4096 bufsize 8000 maxblocks         5800.0   854789.0     1473.8
Shell Scripts (8 concurrent)                     6.0     1097.7     1829.5
                                                                 =========
     FINAL SCORE                                                     991.3

== 2.6.26-rc2-mm1 + this set ==
Execl Throughput                           3012.9 lps   (29.9 secs, 3 samples)
C Compiler Throughput                       981.0 lpm   (60.0 secs, 3 samples)
Shell Scripts (1 concurrent)               5872.0 lpm   (60.0 secs, 3 samples)
Shell Scripts (8 concurrent)               1120.3 lpm   (60.0 secs, 3 samples)
Shell Scripts (16 concurrent)               578.0 lpm   (60.0 secs, 3 samples)
File Read 1024 bufsize 2000 maxblocks    1003993.0 KBps  (30.0 secs, 3 samples)
File Write 1024 bufsize 2000 maxblocks   550452.0 KBps  (30.0 secs, 3 samples)
File Copy 1024 bufsize 2000 maxblocks    347159.0 KBps  (30.0 secs, 3 samples)
File Read 256 bufsize 500 maxblocks      314644.0 KBps  (30.0 secs, 3 samples)
File Write 256 bufsize 500 maxblocks     151852.0 KBps  (30.0 secs, 3 samples)
File Copy 256 bufsize 500 maxblocks      101000.0 KBps  (30.0 secs, 3 samples)
File Read 4096 bufsize 8000 maxblocks    2033256.0 KBps  (30.0 secs, 3 samples)
File Write 4096 bufsize 8000 maxblocks   1611814.0 KBps  (30.0 secs, 3 samples)
File Copy 4096 bufsize 8000 maxblocks    847979.0 KBps  (30.0 secs, 3 samples)
Dc: sqrt(2) to 99 decimal places         128148.7 lpm   (30.0 secs, 3 samples)

                     INDEX VALUES
TEST                                        BASELINE     RESULT      INDEX

Execl Throughput                                43.0     3012.9      700.7
File Copy 1024 bufsize 2000 maxblocks         3960.0   347159.0      876.7
File Copy 256 bufsize 500 maxblocks           1655.0   101000.0      610.3
File Copy 4096 bufsize 8000 maxblocks         5800.0   847979.0     1462.0
Shell Scripts (8 concurrent)                     6.0     1120.3     1867.2
                                                                 =========
     FINAL SCORE                                                    1004.6

This patch:

Remove refcnt from page_cgroup().

After this,

 * A page is charged only when !page_mapped() && no page_cgroup is assigned.
	* Anon page is newly mapped.
	* File page is added to mapping->tree.

 * A page is uncharged only when
	* Anon page is fully unmapped.
	* File page is removed from LRU.

There is no change in behavior from user's view.

This patch also removes unnecessary calls in rmap.c which was used only for
refcnt mangement.

[akpm@linux-foundation.org: fix warning]
[hugh@veritas.com: fix shmem_unuse_inode charging]
Signed-off-by: KAMEZAWA Hiroyuki 
Cc: Balbir Singh 
Cc: "Eric W. Biederman" 
Cc: Pavel Emelyanov 
Cc: Li Zefan 
Cc: Hugh Dickins 
Cc: YAMAMOTO Takashi 
Cc: Paul Menage 
Cc: David Rientjes 
Signed-off-by: Hugh Dickins 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: remove nopage

2008-04-28T15:58:18+00:00

Nothing in the tree uses nopage any more.  Remove support for it in the
core mm code and documentation (and a few stray references to it in
comments).

Signed-off-by: Nick Piggin 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

s390: KVM preparation: host memory management changes for s390 kvm

2008-04-27T09:00:40+00:00

This patch changes the s390 memory management defintions to use the pgste field
for dirty and reference bit tracking of host and guest code. Usually on s390,
dirty and referenced are tracked in storage keys, which belong to the physical
page. This changes with virtualization: The guest and host dirty/reference bits
are defined to be the logical OR of the values for the mapping and the physical
page. This patch implements the necessary changes in pgtable.h for s390.

There is a common code change in mm/rmap.c, the call to
page_test_and_clear_young must be moved. This is a no-op for all
architecture but s390. page_referenced checks the referenced bits for
the physiscal page and for all mappings:
o The physical page is checked with page_test_and_clear_young.
o The mappings are checked with ptep_test_and_clear_young and friends.

Without pgstes (the current implementation on Linux s390) the physical page
check is implemented but the mapping callbacks are no-ops because dirty
and referenced are not tracked in the s390 page tables. The pgstes introduces
guest and host dirty and reference bits for s390 in the host mapping. These
mapping must be checked before page_test_and_clear_young resets the reference
bit.

Signed-off-by: Heiko Carstens 
Signed-off-by: Christian Borntraeger 
Acked-by: Martin Schwidefsky 
Acked-by: Andrew Morton 
Signed-off-by: Carsten Otte 
Signed-off-by: Avi Kivity