linux-toradex.git/mm/vmstat.c, branch v4.11

mm: make mm_percpu_wq non freezable

2017-04-19T22:53:48+00:00

Geert has reported a freeze during PM resume and some additional
debugging has shown that the device_resume worker cannot make a forward
progress because it waits for an event which is stuck waiting in
drain_all_pages:

  INFO: task kworker/u4:0:5 blocked for more than 120 seconds.
        Not tainted 4.11.0-rc7-koelsch-00029-g005882e53d62f25d-dirty #3476
  "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  kworker/u4:0    D    0     5      2 0x00000000
  Workqueue: events_unbound async_run_entry_fn
    __schedule
    schedule
    schedule_timeout
    wait_for_common
    dpm_wait_for_superior
    device_resume
    async_resume
    async_run_entry_fn
    process_one_work
    worker_thread
    kthread
  [...]
  bash            D    0  1703   1694 0x00000000
    __schedule
    schedule
    schedule_timeout
    wait_for_common
    flush_work
    drain_all_pages
    start_isolate_page_range
    alloc_contig_range
    cma_alloc
    __alloc_from_contiguous
    cma_allocator_alloc
    __dma_alloc
    arm_dma_alloc
    sh_eth_ring_init
    sh_eth_open
    sh_eth_resume
    dpm_run_callback
    device_resume
    dpm_resume
    dpm_resume_end
    suspend_devices_and_enter
    pm_suspend
    state_store
    kernfs_fop_write
    __vfs_write
    vfs_write
    SyS_write
  [...]
  Showing busy workqueues and worker pools:
  [...]
  workqueue mm_percpu_wq: flags=0xc
    pwq 2: cpus=1 node=0 flags=0x0 nice=0 active=0/0
      delayed: drain_local_pages_wq, vmstat_update
    pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=0/0
      delayed: drain_local_pages_wq BAR(1703), vmstat_update

Tetsuo has properly noted that mm_percpu_wq is created as WQ_FREEZABLE
so it is frozen this early during resume so we are effectively
deadlocked.  Fix this by dropping WQ_FREEZABLE when creating
mm_percpu_wq.  We really want to have it operational all the time.

Fixes: ce612879ddc7 ("mm: move pcp and lru-pcp draining into single wq")
Reported-and-tested-by: Geert Uytterhoeven 
Debugged-by: Tetsuo Handa 
Signed-off-by: Michal Hocko 
Signed-off-by: Linus Torvalds

mm: move pcp and lru-pcp draining into single wq

2017-04-08T07:47:49+00:00

We currently have 2 specific WQ_RECLAIM workqueues in the mm code.
vmstat_wq for updating pcp stats and lru_add_drain_wq dedicated to drain
per cpu lru caches.  This seems more than necessary because both can run
on a single WQ.  Both do not block on locks requiring a memory
allocation nor perform any allocations themselves.  We will save one
rescuer thread this way.

On the other hand drain_all_pages() queues work on the system wq which
doesn't have rescuer and so this depend on memory allocation (when all
workers are stuck allocating and new ones cannot be created).

Initially we thought this would be more of a theoretical problem but
Hugh Dickins has reported:

: 4.11-rc has been giving me hangs after hours of swapping load.  At
: first they looked like memory leaks ("fork: Cannot allocate memory");
: but for no good reason I happened to do "cat /proc/sys/vm/stat_refresh"
: before looking at /proc/meminfo one time, and the stat_refresh stuck
: in D state, waiting for completion of flush_work like many kworkers.
: kthreadd waiting for completion of flush_work in drain_all_pages().

This worker should be using WQ_RECLAIM as well in order to guarantee a
forward progress.  We can reuse the same one as for lru draining and
vmstat.

Link: http://lkml.kernel.org/r/20170307131751.24936-1-mhocko@kernel.org
Signed-off-by: Michal Hocko 
Suggested-by: Tetsuo Handa 
Acked-by: Vlastimil Babka 
Acked-by: Mel Gorman 
Tested-by: Yang Li 
Tested-by: Hugh Dickins 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: move mm_percpu_wq initialization earlier

2017-04-01T00:13:30+00:00

Yang Li has reported that drain_all_pages triggers a WARN_ON which means
that this function is called earlier than the mm_percpu_wq is
initialized on arm64 with CMA configured:

  WARNING: CPU: 2 PID: 1 at mm/page_alloc.c:2423 drain_all_pages+0x244/0x25c
  Modules linked in:
  CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.11.0-rc1-next-20170310-00027-g64dfbc5 #127
  Hardware name: Freescale Layerscape 2088A RDB Board (DT)
  task: ffffffc07c4a6d00 task.stack: ffffffc07c4a8000
  PC is at drain_all_pages+0x244/0x25c
  LR is at start_isolate_page_range+0x14c/0x1f0
  [...]
   drain_all_pages+0x244/0x25c
   start_isolate_page_range+0x14c/0x1f0
   alloc_contig_range+0xec/0x354
   cma_alloc+0x100/0x1fc
   dma_alloc_from_contiguous+0x3c/0x44
   atomic_pool_init+0x7c/0x208
   arm64_dma_init+0x44/0x4c
   do_one_initcall+0x38/0x128
   kernel_init_freeable+0x1a0/0x240
   kernel_init+0x10/0xfc
   ret_from_fork+0x10/0x20

Fix this by moving the whole setup_vmstat which is an initcall right now
to init_mm_internals which will be called right after the WQ subsystem
is initialized.

Link: http://lkml.kernel.org/r/20170315164021.28532-1-mhocko@kernel.org
Signed-off-by: Michal Hocko 
Reported-by: Yang Li 
Tested-by: Yang Li 
Tested-by: Xiaolong Ye 
Cc: Mel Gorman 
Cc: Vlastimil Babka 
Cc: Tetsuo Handa 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm/vmstats: add thp_split_pud event for clarity

2017-03-10T01:01:10+00:00

We added support for PUD-sized transparent hugepages, however we count
the event "thp split pud" into thp_split_pmd event.

To separate the event count of thp split pud from pmd, add a new event
named thp_split_pud.

Link: http://lkml.kernel.org/r/1488282380-5076-1-git-send-email-xieyisheng1@huawei.com
Signed-off-by: Yisheng Xie 
Cc: Vlastimil Babka 
Cc: Johannes Weiner 
Cc: Michal Hocko 
Cc: Joonsoo Kim 
Cc: Sebastian Siewior 
Cc: Hugh Dickins 
Cc: Christoph Lameter 
Cc: Kirill A. Shutemov 
Cc: Aneesh Kumar K.V 
Cc: Mel Gorman 
Cc: Andrea Arcangeli 
Cc: Ebru Akagunduz 
Cc: David Rientjes 
Cc: Hanjun Guo 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm, compaction: add vmstats for kcompactd work

2017-02-23T00:41:29+00:00

A "compact_daemon_wake" vmstat exists that represents the number of
times kcompactd has woken up.  This doesn't represent how much work it
actually did, though.

It's useful to understand how much compaction work is being done by
kcompactd versus other methods such as direct compaction and explicitly
triggered per-node (or system) compaction.

This adds two new vmstats: "compact_daemon_migrate_scanned" and
"compact_daemon_free_scanned" to represent the number of pages kcompactd
has scanned as part of its migration scanner and freeing scanner,
respectively.

These values are still accounted for in the general
"compact_migrate_scanned" and "compact_free_scanned" for compatibility.

It could be argued that explicitly triggered compaction could also be
tracked separately, and that could be added if others find it useful.

Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1612071749390.69852@chino.kir.corp.google.com
Signed-off-by: David Rientjes 
Acked-by: Vlastimil Babka 
Cc: Michal Hocko 
Cc: Joonsoo Kim 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm/vmstat: Convert to hotplug state machine

2016-12-01T23:52:35+00:00

Install the callbacks via the state machine, but do not invoke them as we
can initialize the node state without calling the callbacks on all online
CPUs.

start_shepherd_timer() is now called outside the get_online_cpus() block
which is safe as it only operates on cpu possible mask.

Signed-off-by: Sebastian Andrzej Siewior 
Signed-off-by: Thomas Gleixner 
Cc: linux-mm@kvack.org
Cc: rt@linutronix.de
Cc: Johannes Weiner 
Cc: Andrew Morton 
Cc: Mel Gorman 
Cc: Vlastimil Babka 
Link: http://lkml.kernel.org/r/20161129145221.ffc3kg3hd7lxiwj6@linutronix.de
Signed-off-by: Thomas Gleixner

mm/vmstat: Avoid on each online CPU loops

2016-12-01T23:52:35+00:00

Both iterations over online cpus can be replaced by the proper node
specific functions.

Signed-off-by: Sebastian Andrzej Siewior 
Acked-by: Michal Hocko 
Cc: linux-mm@kvack.org
Cc: rt@linutronix.de
Cc: Johannes Weiner 
Cc: Andrew Morton 
Cc: Mel Gorman 
Cc: Vlastimil Babka 
Link: http://lkml.kernel.org/r/20161129145113.fn3lw5aazjjvdrr3@linutronix.de
Signed-off-by: Thomas Gleixner

mm/vmstat: Drop get_online_cpus() from init_cpu_node_state/vmstat_cpu_dead()

2016-12-01T23:52:35+00:00

Both functions are called with protection against cpu hotplug already so
*_online_cpus() could be dropped.

Signed-off-by: Sebastian Andrzej Siewior 
Acked-by: Michal Hocko 
Cc: linux-mm@kvack.org
Cc: rt@linutronix.de
Cc: Johannes Weiner 
Cc: Andrew Morton 
Cc: Mel Gorman 
Cc: Vlastimil Babka 
Link: http://lkml.kernel.org/r/20161126231350.10321-8-bigeasy@linutronix.de
Signed-off-by: Thomas Gleixner

seq/proc: modify seq_put_decimal_[u]ll to take a const char *, not char

2016-10-08T01:46:30+00:00

Allow some seq_puts removals by taking a string instead of a single
char.

[akpm@linux-foundation.org: update vmstat_show(), per Joe]
Link: http://lkml.kernel.org/r/667e1cf3d436de91a5698170a1e98d882905e956.1470704995.git.joe@perches.com
Signed-off-by: Joe Perches 
Cc: Joe Perches 
Cc: Andi Kleen 
Cc: Al Viro 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

proc: much faster /proc/vmstat

2016-10-08T01:46:30+00:00

Every current KDE system has process named ksysguardd polling files
below once in several seconds:

	$ strace -e trace=open -p $(pidof ksysguardd)
	Process 1812 attached
	open("/etc/mtab", O_RDONLY|O_CLOEXEC)   = 8
	open("/etc/mtab", O_RDONLY|O_CLOEXEC)   = 8
	open("/proc/net/dev", O_RDONLY)         = 8
	open("/proc/net/wireless", O_RDONLY)    = -1 ENOENT (No such file or directory)
	open("/proc/stat", O_RDONLY)            = 8
	open("/proc/vmstat", O_RDONLY)          = 8

Hell knows what it is doing but speed up reading /proc/vmstat by 33%!

Benchmark is open+read+close 1.000.000 times.

			BEFORE
$ perf stat -r 10 taskset -c 3 ./proc-vmstat

 Performance counter stats for 'taskset -c 3 ./proc-vmstat' (10 runs):

      13146.768464      task-clock (msec)         #    0.960 CPUs utilized            ( +-  0.60% )
                15      context-switches          #    0.001 K/sec                    ( +-  1.41% )
                 1      cpu-migrations            #    0.000 K/sec                    ( +- 11.11% )
               104      page-faults               #    0.008 K/sec                    ( +-  0.57% )
    45,489,799,349      cycles                    #    3.460 GHz                      ( +-  0.03% )
     9,970,175,743      stalled-cycles-frontend   #   21.92% frontend cycles idle     ( +-  0.10% )
     2,800,298,015      stalled-cycles-backend    #   6.16% backend cycles idle       ( +-  0.32% )
    79,241,190,850      instructions              #    1.74  insn per cycle
                                                  #    0.13  stalled cycles per insn  ( +-  0.00% )
    17,616,096,146      branches                  # 1339.956 M/sec                    ( +-  0.00% )
       176,106,232      branch-misses             #    1.00% of all branches          ( +-  0.18% )

      13.691078109 seconds time elapsed                                          ( +-  0.03% )
      ^^^^^^^^^^^^

			AFTER
$ perf stat -r 10 taskset -c 3 ./proc-vmstat

 Performance counter stats for 'taskset -c 3 ./proc-vmstat' (10 runs):

       8688.353749      task-clock (msec)         #    0.950 CPUs utilized            ( +-  1.25% )
                10      context-switches          #    0.001 K/sec                    ( +-  2.13% )
                 1      cpu-migrations            #    0.000 K/sec
               104      page-faults               #    0.012 K/sec                    ( +-  0.56% )
    30,384,010,730      cycles                    #    3.497 GHz                      ( +-  0.07% )
    12,296,259,407      stalled-cycles-frontend   #   40.47% frontend cycles idle     ( +-  0.13% )
     3,370,668,651      stalled-cycles-backend    #  11.09% backend cycles idle       ( +-  0.69% )
    28,969,052,879      instructions              #    0.95  insn per cycle
                                                  #    0.42  stalled cycles per insn  ( +-  0.01% )
     6,308,245,891      branches                  #  726.058 M/sec                    ( +-  0.00% )
       214,685,502      branch-misses             #    3.40% of all branches          ( +-  0.26% )

       9.146081052 seconds time elapsed                                          ( +-  0.07% )
       ^^^^^^^^^^^

vsnprintf() is slow because:

1. format_decode() is busy looking for format specifier: 2 branches
   per character (not in this case, but in others)

2. approximately million branches while parsing format mini language
   and everywhere

3.  just look at what string() does /proc/vmstat is good case because
   most of its content are strings

Link: http://lkml.kernel.org/r/20160806125455.GA1187@p183.telecom.by
Signed-off-by: Alexey Dobriyan 
Cc: Joe Perches 
Cc: Andi Kleen 
Cc: Al Viro 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds