linux-toradex.git/mm, branch v3.4.80

slub: Fix calculation of cpu slabs

2014-02-13T19:51:09+00:00

commit 8afb1474db4701d1ab80cd8251137a3260e6913e upstream.

  /sys/kernel/slab/:t-0000048 # cat cpu_slabs
  231 N0=16 N1=215
  /sys/kernel/slab/:t-0000048 # cat slabs
  145 N0=36 N1=109

See, the number of slabs is smaller than that of cpu slabs.

The bug was introduced by commit 49e2258586b423684f03c278149ab46d8f8b6700
("slub: per cpu cache for partial pages").

We should use page->pages instead of page->pobjects when calculating
the number of cpu partial slabs. This also fixes the mapping of slabs
and nodes.

As there's no variable storing the number of total/active objects in
cpu partial slabs, and we don't have user interfaces requiring those
statistics, I just add WARN_ON for those cases.

Acked-by: Christoph Lameter 
Reviewed-by: Wanpeng Li 
Signed-off-by: Li Zefan 
Signed-off-by: Pekka Enberg 
Signed-off-by: Greg Kroah-Hartman

mm: hugetlbfs: fix hugetlbfs optimization

2014-02-06T19:05:46+00:00

commit 27c73ae759774e63313c1fbfeb17ba076cea64c5 upstream.

Commit 7cb2ef56e6a8 ("mm: fix aio performance regression for database
caused by THP") can cause dereference of a dangling pointer if
split_huge_page runs during PageHuge() if there are updates to the
tail_page->private field.

Also it is repeating compound_head twice for hugetlbfs and it is running
compound_head+compound_trans_head for THP when a single one is needed in
both cases.

The new code within the PageSlab() check doesn't need to verify that the
THP page size is never bigger than the smallest hugetlbfs page size, to
avoid memory corruption.

A longstanding theoretical race condition was found while fixing the
above (see the change right after the skip_unlock label, that is
relevant for the compound_lock path too).

By re-establishing the _mapcount tail refcounting for all compound
pages, this also fixes the below problem:

  echo 0 >/sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages

  BUG: Bad page state in process bash  pfn:59a01
  page:ffffea000139b038 count:0 mapcount:10 mapping:          (null) index:0x0
  page flags: 0x1c00000000008000(tail)
  Modules linked in:
  CPU: 6 PID: 2018 Comm: bash Not tainted 3.12.0+ #25
  Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
  Call Trace:
    dump_stack+0x55/0x76
    bad_page+0xd5/0x130
    free_pages_prepare+0x213/0x280
    __free_pages+0x36/0x80
    update_and_free_page+0xc1/0xd0
    free_pool_huge_page+0xc2/0xe0
    set_max_huge_pages.part.58+0x14c/0x220
    nr_hugepages_store_common.isra.60+0xd0/0xf0
    nr_hugepages_store+0x13/0x20
    kobj_attr_store+0xf/0x20
    sysfs_write_file+0x189/0x1e0
    vfs_write+0xc5/0x1f0
    SyS_write+0x55/0xb0
    system_call_fastpath+0x16/0x1b

Signed-off-by: Khalid Aziz 
Signed-off-by: Andrea Arcangeli 
Tested-by: Khalid Aziz 
Cc: Pravin Shelar 
Cc: Greg Kroah-Hartman 
Cc: Ben Hutchings 
Cc: Christoph Lameter 
Cc: Johannes Weiner 
Cc: Mel Gorman 
Cc: Rik van Riel 
Cc: Andi Kleen 
Cc: Minchan Kim 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Cc: Guillaume Morin 
Signed-off-by: Greg Kroah-Hartman

mm/memory-failure.c: recheck PageHuge() after hugetlb page migrate successfully

2014-01-29T13:10:42+00:00

commit a49ecbcd7b0d5a1cda7d60e03df402dd0ef76ac8 upstream.

After a successful hugetlb page migration by soft offline, the source
page will either be freed into hugepage_freelists or buddy(over-commit
page).  If page is in buddy, page_hstate(page) will be NULL.  It will
hit a NULL pointer dereference in dequeue_hwpoisoned_huge_page().

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000058
  IP: [] dequeue_hwpoisoned_huge_page+0x131/0x1d0
  PGD c23762067 PUD c24be2067 PMD 0
  Oops: 0000 [#1] SMP

So check PageHuge(page) after call migrate_pages() successfully.

[wujg: backport to 3.4:
 - adjust context
 - s/num_poisoned_pages/mce_bad_pages/]

Signed-off-by: Jianguo Wu 
Tested-by: Naoya Horiguchi 
Reviewed-by: Naoya Horiguchi 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

mm/hugetlb: check for pte NULL pointer in __page_check_address()

2014-01-08T17:42:12+00:00

commit 98398c32f6687ee1e1f3ae084effb4b75adb0747 upstream.

In __page_check_address(), if address's pud is not present,
huge_pte_offset() will return NULL, we should check the return value.

Signed-off-by: Jianguo Wu 
Cc: Naoya Horiguchi 
Cc: Mel Gorman 
Cc: qiuxishi 
Cc: Hanjun Guo 
Acked-by: Kirill A. Shutemov 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

mm: fix aio performance regression for database caused by THP

2013-11-13T03:01:49+00:00

commit 7cb2ef56e6a8b7b368b2e883a0a47d02fed66911 upstream.

I am working with a tool that simulates oracle database I/O workload.
This tool (orion to be specific -
)
allocates hugetlbfs pages using shmget() with SHM_HUGETLB flag.  It then
does aio into these pages from flash disks using various common block
sizes used by database.  I am looking at performance with two of the most
common block sizes - 1M and 64K.  aio performance with these two block
sizes plunged after Transparent HugePages was introduced in the kernel.
Here are performance numbers:

		pre-THP		2.6.39		3.11-rc5
1M read		8384 MB/s	5629 MB/s	6501 MB/s
64K read	7867 MB/s	4576 MB/s	4251 MB/s

I have narrowed the performance impact down to the overheads introduced by
THP in __get_page_tail() and put_compound_page() routines.  perf top shows
>40% of cycles being spent in these two routines.  Every time direct I/O
to hugetlbfs pages starts, kernel calls get_page() to grab a reference to
the pages and calls put_page() when I/O completes to put the reference
away.  THP introduced significant amount of locking overhead to get_page()
and put_page() when dealing with compound pages because hugepages can be
split underneath get_page() and put_page().  It added this overhead
irrespective of whether it is dealing with hugetlbfs pages or transparent
hugepages.  This resulted in 20%-45% drop in aio performance when using
hugetlbfs pages.

Since hugetlbfs pages can not be split, there is no reason to go through
all the locking overhead for these pages from what I can see.  I added
code to __get_page_tail() and put_compound_page() to bypass all the
locking code when working with hugetlbfs pages.  This improved performance
significantly.  Performance numbers with this patch:

		pre-THP		3.11-rc5	3.11-rc5 + Patch
1M read		8384 MB/s	6501 MB/s	8371 MB/s
64K read	7867 MB/s	4251 MB/s	6510 MB/s

Performance with 64K read is still lower than what it was before THP, but
still a 53% improvement.  It does mean there is more work to be done but I
will take a 53% improvement for now.

Please take a look at the following patch and let me know if it looks
reasonable.

[akpm@linux-foundation.org: tweak comments]
Signed-off-by: Khalid Aziz 
Cc: Pravin B Shelar 
Cc: Christoph Lameter 
Cc: Andrea Arcangeli 
Cc: Johannes Weiner 
Cc: Mel Gorman 
Cc: Rik van Riel 
Cc: Minchan Kim 
Cc: Andi Kleen 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

writeback: fix negative bdi max pause

2013-11-04T12:23:42+00:00

commit e3b6c655b91e01a1dade056cfa358581b47a5351 upstream.

Toralf runs trinity on UML/i386.  After some time it hangs and the last
message line is

	BUG: soft lockup - CPU#0 stuck for 22s! [trinity-child0:1521]

It's found that pages_dirtied becomes very large.  More than 1000000000
pages in this case:

	period = HZ * pages_dirtied / task_ratelimit;
	BUG_ON(pages_dirtied > 2000000000);
	BUG_ON(pages_dirtied > 1000000000);      <---------

UML debug printf shows that we got negative pause here:

	ick: pause : -984
	ick: pages_dirtied : 0
	ick: task_ratelimit: 0

	 pause:
	+       if (pause < 0)  {
	+               extern int printf(char *, ...);
	+               printf("ick : pause : %li\n", pause);
	+               printf("ick: pages_dirtied : %lu\n", pages_dirtied);
	+               printf("ick: task_ratelimit: %lu\n", task_ratelimit);
	+               BUG_ON(1);
	+       }
	        trace_balance_dirty_pages(bdi,

Since pause is bounded by [min_pause, max_pause] where min_pause is also
bounded by max_pause.  It's suspected and demonstrated that the
max_pause calculation goes wrong:

	ick: pause : -717
	ick: min_pause : -177
	ick: max_pause : -717
	ick: pages_dirtied : 14
	ick: task_ratelimit: 0

The problem lies in the two "long = unsigned long" assignments in
bdi_max_pause() which might go negative if the highest bit is 1, and the
min_t(long, ...) check failed to protect it falling under 0.  Fix all of
them by using "unsigned long" throughout the function.

Signed-off-by: Fengguang Wu 
Reported-by: Toralf Förster 
Tested-by: Toralf Förster 
Reviewed-by: Jan Kara 
Cc: Richard Weinberger 
Cc: Geert Uytterhoeven 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

mm: do not grow the stack vma just because of an overrun on preceding vma

2013-10-22T08:02:25+00:00

commit 09884964335e85e897876d17783c2ad33cf8a2e0 upstream.

The stack vma is designed to grow automatically (marked with VM_GROWSUP
or VM_GROWSDOWN depending on architecture) when an access is made beyond
the existing boundary.  However, particularly if you have not limited
your stack at all ("ulimit -s unlimited"), this can cause the stack to
grow even if the access was really just one past *another* segment.

And that's wrong, especially since we first grow the segment, but then
immediately later enforce the stack guard page on the last page of the
segment.  So _despite_ first growing the stack segment as a result of
the access, the kernel will then make the access cause a SIGSEGV anyway!

So do the same logic as the guard page check does, and consider an
access to within one page of the next segment to be a bad access, rather
than growing the stack to abut the next segment.

Reported-and-tested-by: Heiko Carstens 
Signed-off-by: Linus Torvalds 
Cc: Xishi Qiu 
Signed-off-by: Greg Kroah-Hartman

mm/mmap: check for RLIMIT_AS before unmapping

2013-10-22T08:02:25+00:00

commit e8420a8ece80b3fe810415ecf061d54ca7fab266 upstream.

Fix a corner case for MAP_FIXED when requested mapping length is larger
than rlimit for virtual memory.  In such case any overlapping mappings
are unmapped before we check for the limit and return ENOMEM.

The check is moved before the loop that unmaps overlapping parts of
existing mappings.  When we are about to hit the limit (currently mapped
pages + len > limit) we scan for overlapping pages and check again
accounting for them.

This fixes situation when userspace program expects that the previous
mappings are preserved after the mmap() syscall has returned with error.
(POSIX clearly states that successfull mapping shall replace any
previous mappings.)

This corner case was found and can be tested with LTP testcase:

testcases/open_posix_testsuite/conformance/interfaces/mmap/24-2.c

In this case the mmap, which is clearly over current limit, unmaps
dynamic libraries and the testcase segfaults right after returning into
userspace.

I've also looked at the second instance of the unmapping loop in the
do_brk().  The do_brk() is called from brk() syscall and from vm_brk().
The brk() syscall checks for overlapping mappings and bails out when
there are any (so it can't be triggered from the brk syscall).  The
vm_brk() is called only from binmft handlers so it shouldn't be
triggered unless binmft handler created overlapping mappings.

Signed-off-by: Cyril Hrubis 
Reviewed-by: Mel Gorman 
Reviewed-by: Wanpeng Li 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Cc: Xishi Qiu 
Signed-off-by: Greg Kroah-Hartman

mm, show_mem: suppress page counts in non-blockable contexts

2013-10-13T22:42:49+00:00

commit 4b59e6c4730978679b414a8da61514a2518da512 upstream.

On large systems with a lot of memory, walking all RAM to determine page
types may take a half second or even more.

In non-blockable contexts, the page allocator will emit a page allocation
failure warning unless __GFP_NOWARN is specified.  In such contexts, irqs
are typically disabled and such a lengthy delay may even result in NMI
watchdog timeouts.

To fix this, suppress the page walk in such contexts when printing the
page allocation failure warning.

Signed-off-by: David Rientjes 
Cc: Mel Gorman 
Acked-by: Michal Hocko 
Cc: Dave Hansen 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Cc: Xishi Qiu 
Signed-off-by: Greg Kroah-Hartman

mm, memcg: give exiting processes access to memory reserves

2013-10-05T14:06:54+00:00

commit 465adcf1ea7b2e49b2e0899366624f5532b64012

A memcg may livelock when oom if the process that grabs the hierarchy's
oom lock is never the first process with PF_EXITING set in the memcg's
task iteration.

The oom killer, both global and memcg, will defer if it finds an
eligible process that is in the process of exiting and it is not being
ptraced.  The idea is to allow it to exit without using memory reserves
before needlessly killing another process.

This normally works fine except in the memcg case with a large number of
threads attached to the oom memcg.  In this case, the memcg oom killer
only gets called for the process that grabs the hierarchy's oom lock;
all others end up blocked on the memcg's oom waitqueue.  Thus, if the
process that grabs the hierarchy's oom lock is never the first
PF_EXITING process in the memcg's task iteration, the oom killer is
constantly deferred without anything making progress.

The fix is to give PF_EXITING processes access to memory reserves so
that we've marked them as oom killed without any iteration.  This allows
__mem_cgroup_try_charge() to succeed so that the process may exit.  This
makes the memcg oom killer exemption for TIF_MEMDIE tasks, now
immediately granted for processes with pending SIGKILLs and those in the
exit path, to be equivalent to what is done for the global oom killer.

Signed-off-by: David Rientjes 
Acked-by: Michal Hocko 
Acked-by: KAMEZAWA Hiroyuki 
Acked-by: Johannes Weiner 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
[Qiang: backported to 3.4:
 - move the changes from memcontrol.c to oom_kill.c]
Signed-off-by: Qiang Huang 
Signed-off-by: Greg Kroah-Hartman