linux-toradex.git/net/9p/client.c, branch tegra-11.2.11

fs/9p, net/9p: memory leak fixes

2010-09-13T13:13:02+00:00

Four memory leak fixes in the 9P code.

Signed-off-by: Latchesar Ionkov 
Signed-off-by: Eric Van Hensbergen

fs/9p: destroy fid on failed remove

2010-08-02T19:28:36+00:00

9P spec says:
"It is correct to consider remove to be a clunk with the
side effect of removing the file if permissions allow. "

So even if remove fails we need to destroy the fid.

Without this patch an rmdir on a directory with contents leave
the new cloned directory fid fid attached to fidlist. On umount
we dump the fids on the fidlist

~# rmdir /mnt2/test4/
rmdir: failed to remove `/mnt2/test4/': Directory not empty
~# umount /mnt2/
~# dmesg
[  228.474323] Found fid 3 not clunked

Signed-off-by: Aneesh Kumar K.V 
Signed-off-by: Venkateswararao Jujjuri 
Signed-off-by: Eric Van Hensbergen

net/9p: Implement TXATTRCREATE 9p call

2010-08-02T19:28:34+00:00

TXATTRCREATE:  Prepare a fid for setting xattr value on a file system object.

 size[4] TXATTRCREATE tag[2] fid[4] name[s] attr_size[8] flags[4]
 size[4] RXATTRCREATE tag[2]

txattrcreate gets a fid pointing to xattr. This fid can later be
used to set the xattr value.

flag value is derived from set Linux setxattr. The manpage says
"The flags parameter can be used to refine the semantics of the operation.
XATTR_CREATE specifies a pure create, which fails if the named attribute
exists already. XATTR_REPLACE specifies a pure replace operation, which
fails if the named attribute does not already exist. By default (no flags),
the extended attribute will be created if need be, or will simply replace
the value if the attribute exists."

The actual setxattr operation happens when the fid is clunked. At that point
the written byte count and the attr_size specified in TXATTRCREATE should be
same otherwise an error will be returned.

Signed-off-by: Aneesh Kumar K.V 
Signed-off-by: Venkateswararao Jujjuri 
Signed-off-by: Eric Van Hensbergen

net/9p: Implement attrwalk 9p call

2010-08-02T19:28:33+00:00

TXATTRWALK: Descend a ATTR namespace

 size[4] TXATTRWALK tag[2] fid[4] newfid[4] name[s]
 size[4] RXATTRWALK tag[2] size[8]

txattrwalk gets a fid pointing to xattr. This fid can later be
used to read the xattr value. If name is NULL the fid returned
can be used to get the list of extended attribute associated to
the file system object.

Signed-off-by: Aneesh Kumar K.V 
Signed-off-by: Venkateswararao Jujjuri 
Signed-off-by: Eric Van Hensbergen

9p: Implement LOPEN

2010-08-02T19:28:32+00:00

Implement 9p2000.L version of open(LOPEN) interface in 9p client.

For LOPEN, no need to convert the flags to and from 9p mode to VFS mode.

Synopsis:

    size[4] Tlopen tag[2] fid[4] mode[4]

    size[4] Rlopen tag[2] qid[13] iounit[4]

[Fix mode bit format - jvrao@linux.vnet.ibm.com]

Signed-off-by: M. Mohan Kumar 
Signed-off-by: Venkateswararao Jujjuri 
Signed-off-by: Eric Van Hensbegren

fs/9p: This patch implements TLCREATE for 9p2000.L protocol.

2010-08-02T19:28:32+00:00

SYNOPSIS

    size[4] Tlcreate tag[2] fid[4] name[s] flags[4] mode[4] gid[4]

    size[4] Rlcreate tag[2] qid[13] iounit[4]

DESCRIPTION

The Tlreate request asks the file server to create a new regular file with the
name supplied, in the directory (dir) represented by fid.
The mode argument specifies the permissions to use. New file is created with
the uid if the fid and with supplied gid.

The flags argument represent Linux access mode flags with which the caller
is requesting to open the file with. Protocol allows all the Linux access
modes but it is upto the server to allow/disallow any of these acess modes.
If the server doesn't support any of the access mode, it is expected to
return error.

Signed-off-by: Venkateswararao Jujjuri 
Signed-off-by: Eric Van Hensbergen

9p: Implement TMKDIR

2010-08-02T19:28:31+00:00

Implement TMKDIR as part of 2000.L Work

Synopsis

    size[4] Tmkdir tag[2] fid[4] name[s] mode[4] gid[4]

    size[4] Rmkdir tag[2] qid[13]

Description

    mkdir asks the file server to create a directory with given name,
    mode and gid. The qid for the new directory is returned with
    the mkdir reply message.

Note: 72 is selected as the opcode for TMKDIR from the reserved list.

Signed-off-by: M. Mohan Kumar 
Signed-off-by: Venkateswararao Jujjuri 
Signed-off-by: Eric Van Hensbergen

9p: Implement TMKNOD

2010-08-02T19:28:30+00:00

Synopsis

    size[4] Tmknod tag[2] fid[4] name[s] mode[4] major[4] minor[4] gid[4]

    size[4] Rmknod tag[2] qid[13]

Description

    mknod asks the file server to create a device node with given major and
    minor number, mode and gid. The qid for the new device node is returned
    with the mknod reply message.

[sripathik@in.ibm.com: Fix error handling code]

Signed-off-by: M. Mohan Kumar 
Signed-off-by: Venkateswararao Jujjuri 
Signed-off-by: Eric Van Hensbergen

9p: Define and implement TSYMLINK for 9P2000.L

2010-08-02T19:28:29+00:00

Create a symbolic link

SYNOPSIS

size[4] Tsymlink tag[2] fid[4] name[s] symtgt[s] gid[4]

size[4] Rsymlink tag[2] qid[13]

DESCRIPTION

Create a symbolic link named 'name' pointing to 'symtgt'.
gid represents the effective group id of the caller.
The  permissions of a symbolic link are irrelevant hence it is omitted
from the protocol.

Signed-off-by: Venkateswararao Jujjuri 
Reviewed-by: Sripathi Kodi 
Signed-off-by: Eric Van Hensbergen

9p: Define and implement TLINK for 9P2000.L

2010-08-02T19:28:25+00:00

This patch adds a helper function to get the dentry from inode and
uses it in creating a Hardlink

SYNOPSIS

size[4] Tlink tag[2] dfid[4] oldfid[4] newpath[s]

size[4] Rlink tag[2]

DESCRIPTION

Create a link 'newpath' in directory pointed by dfid linking to oldfid path.

[sripathik@in.ibm.com : p9_client_link should not free req structure
if p9_client_rpc has returned an error.]

Signed-off-by: Venkateswararao Jujjuri 
Signed-off-by: Eric Van Hensbergen