linux-toradex.git/net/bluetooth/rfcomm, branch v2.6.34.2 Linux kernel for Apalis and Colibri modules Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 2010-04-06T15:34:06+00:00 Linus Torvalds torvalds@linux-foundation.org 2010-04-06T15:34:06+00:00 cb4361c1dc29cd870f664c004b1817106fbce0fa * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (37 commits) smc91c92_cs: fix the problem of "Unable to find hardware address" r8169: clean up my printk uglyness net: Hook up cxgb4 to Kconfig and Makefile cxgb4: Add main driver file and driver Makefile cxgb4: Add remaining driver headers and L2T management cxgb4: Add packet queues and packet DMA code cxgb4: Add HW and FW support code cxgb4: Add register, message, and FW definitions netlabel: Fix several rcu_dereference() calls used without RCU read locks bonding: fix potential deadlock in bond_uninit() net: check the length of the socket address passed to connect(2) stmmac: add documentation for the driver. stmmac: fix kconfig for crc32 build error be2net: fix bug in vlan rx path for big endian architecture be2net: fix flashing on big endian architectures be2net: fix a bug in flashing the redboot section bonding: bond_xmit_roundrobin() fix drivers/net: Add missing unlock net: gianfar - align BD ring size console messages net: gianfar - initialize per-queue statistics ... 
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (37 commits)
  smc91c92_cs: fix the problem of "Unable to find hardware address"
  r8169: clean up my printk uglyness
  net: Hook up cxgb4 to Kconfig and Makefile
  cxgb4: Add main driver file and driver Makefile
  cxgb4: Add remaining driver headers and L2T management
  cxgb4: Add packet queues and packet DMA code
  cxgb4: Add HW and FW support code
  cxgb4: Add register, message, and FW definitions
  netlabel: Fix several rcu_dereference() calls used without RCU read locks
  bonding: fix potential deadlock in bond_uninit()
  net: check the length of the socket address passed to connect(2)
  stmmac: add documentation for the driver.
  stmmac: fix kconfig for crc32 build error
  be2net: fix bug in vlan rx path for big endian architecture
  be2net: fix flashing on big endian architectures
  be2net: fix a bug in flashing the redboot section
  bonding: bond_xmit_roundrobin() fix
  drivers/net: Add missing unlock
  net: gianfar - align BD ring size console messages
  net: gianfar - initialize per-queue statistics
  ...
net: check the length of the socket address passed to connect(2) 2010-04-02T00:26:01+00:00 Changli Gao xiaosuo@gmail.com 2010-03-31T22:58:26+00:00 6503d96168f891ffa3b70ae6c9698a1a722025a0 check the length of the socket address passed to connect(2). Check the length of the socket address passed to connect(2). If the length is invalid, -EINVAL will be returned. Signed-off-by: Changli Gao <xiaosuo@gmail.com> ---- net/bluetooth/l2cap.c | 3 ++- net/bluetooth/rfcomm/sock.c | 3 ++- net/bluetooth/sco.c | 3 ++- net/can/bcm.c | 3 +++ net/ieee802154/af_ieee802154.c | 3 +++ net/ipv4/af_inet.c | 5 +++++ net/netlink/af_netlink.c | 3 +++ 7 files changed, 20 insertions(+), 3 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net> 
check the length of the socket address passed to connect(2).

Check the length of the socket address passed to connect(2). If the
length is invalid, -EINVAL will be returned.

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
----
net/bluetooth/l2cap.c | 3 ++-
net/bluetooth/rfcomm/sock.c | 3 ++-
net/bluetooth/sco.c | 3 ++-
net/can/bcm.c | 3 +++
net/ieee802154/af_ieee802154.c | 3 +++
net/ipv4/af_inet.c | 5 +++++
net/netlink/af_netlink.c | 3 +++
7 files changed, 20 insertions(+), 3 deletions(-)
Signed-off-by: David S. Miller <davem@davemloft.net>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h 2010-03-30T13:02:32+00:00 Tejun Heo tj@kernel.org 2010-03-24T08:04:11+00:00 5a0e3ad6af8660be21ca98a971cd00f331318c05 percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> 
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Bluetooth: Convert debug files to actually use debugfs instead of sysfs 2010-03-21T04:49:35+00:00 Marcel Holtmann marcel@holtmann.org 2010-03-21T04:27:45+00:00 aef7d97cc604309b66f6f45cce02cd734934cd4e Some of the debug files ended up wrongly in sysfs, because at that point of time, debugfs didn't exist. Convert these files to use debugfs and also seq_file. This patch converts all of these files at once and then removes the exported symbol for the Bluetooth sysfs class. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> 
Some of the debug files ended up wrongly in sysfs, because at that point
of time, debugfs didn't exist. Convert these files to use debugfs and
also seq_file. This patch converts all of these files at once and then
removes the exported symbol for the Bluetooth sysfs class.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Bluetooth: Fix potential bad memory access with sysfs files 2010-03-21T04:49:32+00:00 Marcel Holtmann marcel@holtmann.org 2010-03-15T21:12:58+00:00 101545f6fef4a0a3ea8daf0b5b880df2c6a92a69 When creating a high number of Bluetooth sockets (L2CAP, SCO and RFCOMM) it is possible to scribble repeatedly on arbitrary pages of memory. Ensure that the content of these sysfs files is always less than one page. Even if this means truncating. The files in question are scheduled to be moved over to debugfs in the future anyway. Based on initial patches from Neil Brown and Linus Torvalds Reported-by: Neil Brown <neilb@suse.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> 
When creating a high number of Bluetooth sockets (L2CAP, SCO
and RFCOMM) it is possible to scribble repeatedly on arbitrary
pages of memory. Ensure that the content of these sysfs files is
always less than one page. Even if this means truncating. The
files in question are scheduled to be moved over to debugfs in
the future anyway.

Based on initial patches from Neil Brown and Linus Torvalds

Reported-by: Neil Brown <neilb@suse.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
driver-core: Add attribute argument to class_attribute show/store 2010-03-08T01:04:48+00:00 Andi Kleen andi@firstfloor.org 2010-01-05T11:48:07+00:00 28812fe11a21826ba4c97c6c7971a619987cd912 Passing the attribute to the low level IO functions allows all kinds of cleanups, by sharing low level IO code without requiring an own function for every piece of data. Also drivers can extend the attributes with own data fields and use that in the low level function. This makes the class attributes the same as sysdev_class attributes and plain attributes. This will allow further cleanups in drivers. Full tree sweep converting all users. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
Passing the attribute to the low level IO functions allows all kinds
of cleanups, by sharing low level IO code without requiring
an own function for every piece of data.

Also drivers can extend the attributes with own data fields
and use that in the low level function.

This makes the class attributes the same as sysdev_class attributes
and plain attributes.

This will allow further cleanups in drivers.

Full tree sweep converting all users.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Bluetooth: Do not call rfcomm_session_put() for RFCOMM UA on closed socket 2010-02-04T00:28:44+00:00 Nick Pelly npelly@google.com 2010-02-04T00:18:36+00:00 6c2718da59613d76013b501bf0f8bcf9d7794b2d When processing a RFCOMM UA frame when the socket is closed and we were not the RFCOMM initiator would cause rfcomm_session_put() to be called twice during rfcomm_process_rx(). This would cause a kernel panic in rfcomm_session_close() then. This could be easily reproduced during disconnect with devices such as Motorola H270 that send RFCOMM UA followed quickly by L2CAP disconnect request. This trace for this looks like: 2009-09-21 17:22:37.788895 < ACL data: handle 1 flags 0x02 dlen 8 L2CAP(d): cid 0x0041 len 4 [psm 3] RFCOMM(s): DISC: cr 0 dlci 20 pf 1 ilen 0 fcs 0x7d 2009-09-21 17:22:37.906204 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 1 packets 1 2009-09-21 17:22:37.933090 > ACL data: handle 1 flags 0x02 dlen 8 L2CAP(d): cid 0x0040 len 4 [psm 3] RFCOMM(s): UA: cr 0 dlci 20 pf 1 ilen 0 fcs 0x57 2009-09-21 17:22:38.636764 < ACL data: handle 1 flags 0x02 dlen 8 L2CAP(d): cid 0x0041 len 4 [psm 3] RFCOMM(s): DISC: cr 0 dlci 0 pf 1 ilen 0 fcs 0x9c 2009-09-21 17:22:38.744125 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 1 packets 1 2009-09-21 17:22:38.763687 > ACL data: handle 1 flags 0x02 dlen 8 L2CAP(d): cid 0x0040 len 4 [psm 3] RFCOMM(s): UA: cr 0 dlci 0 pf 1 ilen 0 fcs 0xb6 2009-09-21 17:22:38.783554 > ACL data: handle 1 flags 0x02 dlen 12 L2CAP(s): Disconn req: dcid 0x0040 scid 0x0041 Avoid calling rfcomm_session_put() twice by skipping this call in rfcomm_recv_ua() if the socket is closed. Signed-off-by: Nick Pelly <npelly@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> 
When processing a RFCOMM UA frame when the socket is closed and we were
not the RFCOMM initiator would cause rfcomm_session_put() to be called
twice during rfcomm_process_rx(). This would cause a kernel panic in
rfcomm_session_close() then.

This could be easily reproduced during disconnect with devices such as
Motorola H270 that send RFCOMM UA followed quickly by L2CAP disconnect
request. This trace for this looks like:

2009-09-21 17:22:37.788895 < ACL data: handle 1 flags 0x02 dlen 8
   L2CAP(d): cid 0x0041 len 4 [psm 3]
     RFCOMM(s): DISC: cr 0 dlci 20 pf 1 ilen 0 fcs 0x7d
2009-09-21 17:22:37.906204 > HCI Event: Number of Completed Packets (0x13) plen 5
   handle 1 packets 1
2009-09-21 17:22:37.933090 > ACL data: handle 1 flags 0x02 dlen 8
   L2CAP(d): cid 0x0040 len 4 [psm 3]
     RFCOMM(s): UA: cr 0 dlci 20 pf 1 ilen 0 fcs 0x57
2009-09-21 17:22:38.636764 < ACL data: handle 1 flags 0x02 dlen 8
   L2CAP(d): cid 0x0041 len 4 [psm 3]
     RFCOMM(s): DISC: cr 0 dlci 0 pf 1 ilen 0 fcs 0x9c
2009-09-21 17:22:38.744125 > HCI Event: Number of Completed Packets (0x13) plen 5
   handle 1 packets 1
2009-09-21 17:22:38.763687 > ACL data: handle 1 flags 0x02 dlen 8
   L2CAP(d): cid 0x0040 len 4 [psm 3]
     RFCOMM(s): UA: cr 0 dlci 0 pf 1 ilen 0 fcs 0xb6
2009-09-21 17:22:38.783554 > ACL data: handle 1 flags 0x02 dlen 12
   L2CAP(s): Disconn req: dcid 0x0040 scid 0x0041

Avoid calling rfcomm_session_put() twice by skipping this call
in rfcomm_recv_ua() if the socket is closed.

Signed-off-by: Nick Pelly <npelly@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Bluetooth: Fix sleeping function in RFCOMM within invalid context 2010-02-03T23:52:18+00:00 Marcel Holtmann marcel@holtmann.org 2010-02-03T23:52:18+00:00 485f1eff73a7b932fd3abb0dfcf804e1a1f59025 With the commit 9e726b17422bade75fba94e625cd35fd1353e682 the rfcomm_session_put() gets accidentially called from a timeout callback and results in this: BUG: sleeping function called from invalid context at net/core/sock.c:1897 in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper Pid: 0, comm: swapper Tainted: P 2.6.32 #31 Call Trace: <IRQ> [<ffffffff81036455>] __might_sleep+0xf8/0xfa [<ffffffff8138ef1d>] lock_sock_nested+0x29/0xc4 [<ffffffffa03921b3>] lock_sock+0xb/0xd [l2cap] [<ffffffffa03948e6>] l2cap_sock_shutdown+0x1c/0x76 [l2cap] [<ffffffff8106adea>] ? clockevents_program_event+0x75/0x7e [<ffffffff8106bea2>] ? tick_dev_program_event+0x37/0xa5 [<ffffffffa0394967>] l2cap_sock_release+0x27/0x67 [l2cap] [<ffffffff8138c971>] sock_release+0x1a/0x67 [<ffffffffa03d2492>] rfcomm_session_del+0x34/0x53 [rfcomm] [<ffffffffa03d24c5>] rfcomm_session_put+0x14/0x16 [rfcomm] [<ffffffffa03d28b4>] rfcomm_session_timeout+0xe/0x1a [rfcomm] [<ffffffff810554a8>] run_timer_softirq+0x1e2/0x29a [<ffffffffa03d28a6>] ? rfcomm_session_timeout+0x0/0x1a [rfcomm] [<ffffffff8104e0f6>] __do_softirq+0xfe/0x1c5 [<ffffffff8100e8ce>] ? timer_interrupt+0x1a/0x21 [<ffffffff8100cc4c>] call_softirq+0x1c/0x28 [<ffffffff8100e05b>] do_softirq+0x33/0x6b [<ffffffff8104daf6>] irq_exit+0x36/0x85 [<ffffffff8100d7a9>] do_IRQ+0xa6/0xbd [<ffffffff8100c493>] ret_from_intr+0x0/0xa <EOI> [<ffffffff812585b3>] ? acpi_idle_enter_bm+0x269/0x294 [<ffffffff812585a9>] ? acpi_idle_enter_bm+0x25f/0x294 [<ffffffff81373ddc>] ? cpuidle_idle_call+0x97/0x107 [<ffffffff8100aca0>] ? cpu_idle+0x53/0xaa [<ffffffff81429006>] ? rest_init+0x7a/0x7c [<ffffffff8177bc8c>] ? start_kernel+0x389/0x394 [<ffffffff8177b29c>] ? x86_64_start_reservations+0xac/0xb0 [<ffffffff8177b384>] ? x86_64_start_kernel+0xe4/0xeb To fix this, the rfcomm_session_put() needs to be moved out of rfcomm_session_timeout() into rfcomm_process_sessions(). In that context it is perfectly fine to sleep and disconnect the socket. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Tested-by: David John <davidjon@xenontk.org> 
With the commit 9e726b17422bade75fba94e625cd35fd1353e682 the
rfcomm_session_put() gets accidentially called from a timeout
callback and results in this:

BUG: sleeping function called from invalid context at net/core/sock.c:1897
in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper
Pid: 0, comm: swapper Tainted: P           2.6.32 #31
Call Trace:
 <IRQ>  [<ffffffff81036455>] __might_sleep+0xf8/0xfa
 [<ffffffff8138ef1d>] lock_sock_nested+0x29/0xc4
 [<ffffffffa03921b3>] lock_sock+0xb/0xd [l2cap]
 [<ffffffffa03948e6>] l2cap_sock_shutdown+0x1c/0x76 [l2cap]
 [<ffffffff8106adea>] ? clockevents_program_event+0x75/0x7e
 [<ffffffff8106bea2>] ? tick_dev_program_event+0x37/0xa5
 [<ffffffffa0394967>] l2cap_sock_release+0x27/0x67 [l2cap]
 [<ffffffff8138c971>] sock_release+0x1a/0x67
 [<ffffffffa03d2492>] rfcomm_session_del+0x34/0x53 [rfcomm]
 [<ffffffffa03d24c5>] rfcomm_session_put+0x14/0x16 [rfcomm]
 [<ffffffffa03d28b4>] rfcomm_session_timeout+0xe/0x1a [rfcomm]
 [<ffffffff810554a8>] run_timer_softirq+0x1e2/0x29a
 [<ffffffffa03d28a6>] ? rfcomm_session_timeout+0x0/0x1a [rfcomm]
 [<ffffffff8104e0f6>] __do_softirq+0xfe/0x1c5
 [<ffffffff8100e8ce>] ? timer_interrupt+0x1a/0x21
 [<ffffffff8100cc4c>] call_softirq+0x1c/0x28
 [<ffffffff8100e05b>] do_softirq+0x33/0x6b
 [<ffffffff8104daf6>] irq_exit+0x36/0x85
 [<ffffffff8100d7a9>] do_IRQ+0xa6/0xbd
 [<ffffffff8100c493>] ret_from_intr+0x0/0xa
 <EOI>  [<ffffffff812585b3>] ? acpi_idle_enter_bm+0x269/0x294
 [<ffffffff812585a9>] ? acpi_idle_enter_bm+0x25f/0x294
 [<ffffffff81373ddc>] ? cpuidle_idle_call+0x97/0x107
 [<ffffffff8100aca0>] ? cpu_idle+0x53/0xaa
 [<ffffffff81429006>] ? rest_init+0x7a/0x7c
 [<ffffffff8177bc8c>] ? start_kernel+0x389/0x394
 [<ffffffff8177b29c>] ? x86_64_start_reservations+0xac/0xb0
 [<ffffffff8177b384>] ? x86_64_start_kernel+0xe4/0xeb

To fix this, the rfcomm_session_put() needs to be moved out of
rfcomm_session_timeout() into rfcomm_process_sessions(). In that
context it is perfectly fine to sleep and disconnect the socket.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Tested-by: David John <davidjon@xenontk.org>
Bluetooth: Add RFCOMM option to use L2CAP ERTM mode 2009-12-03T18:34:26+00:00 Marcel Holtmann marcel@holtmann.org 2009-10-05T10:23:48+00:00 eae38eede2e5f70d65f09327297bd698b0d3ea7e By default the RFCOMM layer would still use L2CAP basic mode. For testing purposes this option enables RFCOMM to select enhanced retransmission mode. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> 
By default the RFCOMM layer would still use L2CAP basic mode. For testing
purposes this option enables RFCOMM to select enhanced retransmission
mode.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
net: pass kern to net_proto_family create function 2009-11-06T06:18:14+00:00 Eric Paris eparis@redhat.com 2009-11-06T06:18:14+00:00 3f378b684453f2a028eda463ce383370545d9cc9 The generic __sock_create function has a kern argument which allows the security system to make decisions based on if a socket is being created by the kernel or by userspace. This patch passes that flag to the net_proto_family specific create function, so it can do the same thing. Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
The generic __sock_create function has a kern argument which allows the
security system to make decisions based on if a socket is being created by
the kernel or by userspace.  This patch passes that flag to the
net_proto_family specific create function, so it can do the same thing.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>