linux-toradex.git/net/bridge/br_vlan.c, branch v5.8-rc3

net: bridge: vlan options: nest the tunnel id into a tunnel info attribute

2020-03-20T15:52:20+00:00

While discussing the new API, Roopa mentioned that we'll be adding more
tunnel attributes and options in the future, so it's better to make it a
nested attribute, since this is still in net-next we can easily change it
and nest the tunnel id attribute under BRIDGE_VLANDB_ENTRY_TUNNEL_INFO.

The new format is:
 [BRIDGE_VLANDB_ENTRY]
     [BRIDGE_VLANDB_ENTRY_TUNNEL_INFO]
         [BRIDGE_VLANDB_TINFO_ID]

Any new tunnel attributes can be nested under
BRIDGE_VLANDB_ENTRY_TUNNEL_INFO.

Suggested-by: Roopa Prabhu 
Signed-off-by: Nikolay Aleksandrov 
Signed-off-by: David S. Miller

net: bridge: vlan: include stats in dumps if requested

2020-03-20T03:21:47+00:00

This patch adds support for vlan stats to be included when dumping vlan
information. We have to dump them only when explicitly requested (thus the
flag below) because that disables the vlan range compression and will make
the dump significantly larger. In order to request the stats to be
included we add a new dump attribute called BRIDGE_VLANDB_DUMP_FLAGS which
can affect dumps with the following first flag:
  - BRIDGE_VLANDB_DUMPF_STATS
The stats are intentionally nested and put into separate attributes to make
it easier for extending later since we plan to add per-vlan mcast stats,
drop stats and possibly STP stats. This is the last missing piece from the
new vlan API which makes the dumped vlan information complete.

A dump request which should include stats looks like:
 [BRIDGE_VLANDB_DUMP_FLAGS] |= BRIDGE_VLANDB_DUMPF_STATS

A vlandb entry attribute with stats looks like:
 [BRIDGE_VLANDB_ENTRY] = {
     [BRIDGE_VLANDB_ENTRY_STATS] = {
         [BRIDGE_VLANDB_STATS_RX_BYTES]
         [BRIDGE_VLANDB_STATS_RX_PACKETS]
         ...
     }
 }

Signed-off-by: Nikolay Aleksandrov 
Signed-off-by: David S. Miller

net: bridge: vlan options: add support for tunnel mapping set/del

2020-03-18T05:47:12+00:00

This patch adds support for manipulating vlan/tunnel mappings. The
tunnel ids are globally unique and are one per-vlan. There were two
trickier issues - first in order to support vlan ranges we have to
compute the current tunnel id in the following way:
 - base tunnel id (attr) + current vlan id - starting vlan id
This is in line how the old API does vlan/tunnel mapping with ranges. We
already have the vlan range present, so it's redundant to add another
attribute for the tunnel range end. It's simply base tunnel id + vlan
range. And second to support removing mappings we need an out-of-band way
to tell the option manipulating function because there are no
special/reserved tunnel id values, so we use a vlan flag to denote the
operation is tunnel mapping removal.

Signed-off-by: Nikolay Aleksandrov 
Signed-off-by: David S. Miller

net: bridge: vlan options: rename br_vlan_opts_eq to br_vlan_opts_eq_range

2020-03-18T05:47:12+00:00

It is more appropriate name as it shows the intent of why we need to
check the options' state. It also allows us to give meaning to the two
arguments of the function: the first is the current vlan (v_curr) being
checked if it could enter the range ending in the second one (range_end).

Signed-off-by: Nikolay Aleksandrov 
Signed-off-by: David S. Miller

net: bridge: vlan: add per-vlan state

2020-01-24T11:58:14+00:00

The first per-vlan option added is state, it is needed for EVPN and for
per-vlan STP. The state allows to control the forwarding on per-vlan
basis. The vlan state is considered only if the port state is forwarding
in order to avoid conflicts and be consistent. br_allowed_egress is
called only when the state is forwarding, but the ingress case is a bit
more complicated due to the fact that we may have the transition between
port:BR_STATE_FORWARDING -> vlan:BR_STATE_LEARNING which should still
allow the bridge to learn from the packet after vlan filtering and it will
be dropped after that. Also to optimize the pvid state check we keep a
copy in the vlan group to avoid one lookup. The state members are
modified with *_ONCE() to annotate the lockless access.

Signed-off-by: Nikolay Aleksandrov 
Signed-off-by: David S. Miller

net: bridge: vlan: add basic option setting support

2020-01-24T11:58:14+00:00

This patch adds support for option modification of single vlans and
ranges. It allows to only modify options, i.e. skip create/delete by
using the BRIDGE_VLAN_INFO_ONLY_OPTS flag. When working with a range
option changes we try to pack the notifications as much as possible.

v2: do full port (all vlans) notification only when creating/deleting
    vlans for compatibility, rework the range detection when changing
    options, add more verbose extack errors and check if a vlan should
    be used (br_vlan_should_use checks)

Signed-off-by: Nikolay Aleksandrov 
Signed-off-by: David S. Miller

net: bridge: vlan: add basic option dumping support

2020-01-24T11:58:14+00:00

We'll be dumping the options for the whole range if they're equal. The
first range vlan will be used to extract the options. The commit doesn't
change anything yet it just adds the skeleton for the support. The dump
will happen when the first option is added.

Signed-off-by: Nikolay Aleksandrov 
Signed-off-by: David S. Miller

net: bridge: vlan: notify on vlan add/delete/change flags

2020-01-15T12:48:18+00:00

Now that we can notify, send a notification on add/del or change of flags.
Notifications are also compressed when possible to reduce their number
and relieve user-space of extra processing, due to that we have to
manually notify after each add/del in order to avoid double
notifications. We try hard to notify only about the vlans which actually
changed, thus a single command can result in multiple notifications
about disjoint ranges if there were vlans which didn't change inside.

Signed-off-by: Nikolay Aleksandrov 
Signed-off-by: David S. Miller

net: bridge: vlan: add rtnetlink group and notify support

2020-01-15T12:48:18+00:00

Add a new rtnetlink group for bridge vlan notifications - RTNLGRP_BRVLAN
and add support for sending vlan notifications (both single and ranges).
No functional changes intended, the notification support will be used by
later patches.

Signed-off-by: Nikolay Aleksandrov 
Signed-off-by: David S. Miller

net: bridge: vlan: add rtm range support

2020-01-15T12:48:18+00:00

Add a new vlandb nl attribute - BRIDGE_VLANDB_ENTRY_RANGE which causes
RTM_NEWVLAN/DELVAN to act on a range. Dumps now automatically compress
similar vlans into ranges. This will be also used when per-vlan options
are introduced and vlans' options match, they will be put into a single
range which is encapsulated in one netlink attribute. We need to run
similar checks as br_process_vlan_info() does because these ranges will
be used for options setting and they'll be able to skip
br_process_vlan_info().

Signed-off-by: Nikolay Aleksandrov 
Signed-off-by: David S. Miller