linux-toradex.git/net/bridge, branch v4.9.15

bridge: netlink: call br_changelink() during br_dev_newlink()

2017-02-04T08:47:10+00:00

[ Upstream commit b6677449dff674cf5b81429b11d5c7f358852ef9 ]

Any bridge options specified during link creation (e.g. ip link add)
are ignored as br_dev_newlink() does not process them.
Use br_changelink() to do it.

Fixes: 133235161721 ("bridge: implement rtnl_link_ops->changelink")
Signed-off-by: Ivan Vecera 
Reviewed-by: Jiri Pirko 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

bridge: netfilter: Fix dropping packets that moving through bridge interface

2017-01-19T19:18:01+00:00

commit 14221cc45caad2fcab3a8543234bb7eda9b540d5 upstream.

Problem:
br_nf_pre_routing_finish() calls itself instead of
br_nf_pre_routing_finish_bridge(). Due to this bug reverse path filter drops
packets that go through bridge interface.

User impact:
Local docker containers with bridge network can not communicate with each
other.

Fixes: c5136b15ea36 ("netfilter: bridge: add and use br_nf_hook_thresh")
Signed-off-by: Artur Molchanov 
Acked-by: Florian Westphal 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Greg Kroah-Hartman

net: bridge: set error code on failure

2016-12-05T18:26:22+00:00

Function br_sysfs_addbr() does not set error code when the call
kobject_create_and_add() returns a NULL pointer. It may be better to
return "-ENOMEM" when kobject_create_and_add() fails.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188781

Signed-off-by: Pan Bian 
Acked-by: Stephen Hemminger 
Signed-off-by: David S. Miller

bridge: multicast: restore perm router ports on multicast enable

2016-10-18T17:52:13+00:00

Satish reported a problem with the perm multicast router ports not getting
reenabled after some series of events, in particular if it happens that the
multicast snooping has been disabled and the port goes to disabled state
then it will be deleted from the router port list, but if it moves into
non-disabled state it will not be re-added because the mcast snooping is
still disabled, and enabling snooping later does nothing.

Here are the steps to reproduce, setup br0 with snooping enabled and eth1
added as a perm router (multicast_router = 2):
1. $ echo 0 > /sys/class/net/br0/bridge/multicast_snooping
2. $ ip l set eth1 down
^ This step deletes the interface from the router list
3. $ ip l set eth1 up
^ This step does not add it again because mcast snooping is disabled
4. $ echo 1 > /sys/class/net/br0/bridge/multicast_snooping
5. $ bridge -d -s mdb show


At this point we have mcast enabled and eth1 as a perm router (value = 2)
but it is not in the router list which is incorrect.

After this change:
1. $ echo 0 > /sys/class/net/br0/bridge/multicast_snooping
2. $ ip l set eth1 down
^ This step deletes the interface from the router list
3. $ ip l set eth1 up
^ This step does not add it again because mcast snooping is disabled
4. $ echo 1 > /sys/class/net/br0/bridge/multicast_snooping
5. $ bridge -d -s mdb show
router ports on br0: eth1

Note: we can directly do br_multicast_enable_port for all because the
querier timer already has checks for the port state and will simply
expire if it's in blocking/disabled. See the comment added by
commit 9aa66382163e7 ("bridge: multicast: add a comment to
br_port_state_selection about blocking state")

Fixes: 561f1103a2b7 ("bridge: Add multicast_snooping sysfs toggle")
Reported-by: Satish Ashok 
Signed-off-by: Nikolay Aleksandrov 
Signed-off-by: David S. Miller

net: bridge: add the multicast_flood flag attribute to brport_attrs

2016-10-13T16:16:36+00:00

When I added the multicast flood control flag, I also added an attribute
for it for sysfs similar to other flags, but I forgot to add it to
brport_attrs.

Fixes: b6cb5ac8331b ("net: bridge: add per-port multicast flood flag")
Signed-off-by: Nikolay Aleksandrov 
Signed-off-by: David S. Miller

netfilter: bridge: clarify bridge/netfilter message

2016-10-03T02:44:03+00:00

When using bridge without bridge netfilter enabled the message
displayed is rather confusing and leads to belive that a deprecated
feature is in use. Use IS_MODULE to be explicit that the message only
affects users which use bridge netfilter as module and reword the
message.

Signed-off-by: Stefan Agner 
Acked-by: Florian Westphal 
Signed-off-by: David S. Miller

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2016-09-25T21:34:19+00:00

Conflicts:
	net/netfilter/core.c
	net/netfilter/nf_tables_netdev.c

Resolve two conflicts before pull request for David's net-next tree:

1) Between c73c24849011 ("netfilter: nf_tables_netdev: remove redundant
   ip_hdr assignment") from the net tree and commit ddc8b6027ad0
   ("netfilter: introduce nft_set_pktinfo_{ipv4, ipv6}_validate()").

2) Between e8bffe0cf964 ("net: Add _nf_(un)register_hooks symbols") and
   Aaron Conole's patches to replace list_head with single linked list.

Signed-off-by: Pablo Neira Ayuso

netfilter: nft_log: complete NFTA_LOG_FLAGS attr support

2016-09-25T21:16:43+00:00

NFTA_LOG_FLAGS attribute is already supported, but the related
NF_LOG_XXX flags are not exposed to the userspace. So we cannot
explicitly enable log flags to log uid, tcp sequence, ip options
and so on, i.e. such rule "nft add rule filter output log uid"
is not supported yet.

So move NF_LOG_XXX macro definitions to the uapi/../nf_log.h. In
order to keep consistent with other modules, change NF_LOG_MASK to
refer to all supported log flags. On the other hand, add a new
NF_LOG_DEFAULT_MASK to refer to the original default log flags.

Finally, if user specify the unsupported log flags or NFTA_LOG_GROUP
and NFTA_LOG_FLAGS are set at the same time, report EINVAL to the
userspace.

Signed-off-by: Liping Zhang 
Signed-off-by: Pablo Neira Ayuso

netfilter: replace list_head with single linked list

2016-09-25T12:38:48+00:00

The netfilter hook list never uses the prev pointer, and so can be trimmed to
be a simple singly-linked list.

In addition to having a more light weight structure for hook traversal,
struct net becomes 5568 bytes (down from 6400) and struct net_device becomes
2176 bytes (down from 2240).

Signed-off-by: Aaron Conole 
Signed-off-by: Florian Westphal 
Signed-off-by: Pablo Neira Ayuso

netfilter: Remove explicit rcu_read_lock in nf_hook_slow

2016-09-24T19:29:53+00:00

All of the callers of nf_hook_slow already hold the rcu_read_lock, so this
cleanup removes the recursive call.  This is just a cleanup, as the locking
code gracefully handles this situation.

Signed-off-by: Aaron Conole 
Signed-off-by: Pablo Neira Ayuso