Commit c2aba69d0c36 ("can: bcm: add locking for bcm_op runtime updates")
added a locking for some variables that can be modified at runtime when
updating the sending bcm_op with a new TX_SETUP command in bcm_tx_setup().

Usually the RX_SETUP only handles and filters incoming traffic with one
exception: When the RX_RTR_FRAME flag is set a predefined CAN frame is
sent when a specific RTR frame is received. Therefore the rx bcm_op uses
bcm_can_tx() which uses the bcm_tx_lock that was only initialized in
bcm_tx_setup(). Add the missing spin_lock_init() when allocating the
bcm_op in bcm_rx_setup() to handle the RTR case properly.

Fixes: c2aba69d0c36 ("can: bcm: add locking for bcm_op runtime updates")
Reported-by: syzbot+5b11eccc403dd1cea9f8@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-can/699466e4.a70a0220.2c38d7.00ff.GAE@google.com/
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260218-bcm_spin_lock_init-v1-1-592634c8a5b5@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

This converts some of the visually simpler cases that have been split
over multiple lines.  I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.

Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script.  I probably had made it a bit _too_ trivial.

So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.

The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This was done entirely with mindless brute force, using

    git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
        xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'

to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.

Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.

For the same reason the 'flex' versions will be done as a separate
conversion.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:

Single allocations:	kmalloc(sizeof(TYPE), ...)
are replaced with:	kmalloc_obj(TYPE, ...)

Array allocations:	kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with:	kmalloc_objs(TYPE, COUNT, ...)

Flex array allocations:	kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with:	kmalloc_flex(*PTR, FAM, COUNT, ...)

(where TYPE may also be *VAR)

The resulting allocations no longer return "void *", instead returning
"TYPE *".

Signed-off-by: Kees Cook <kees@kernel.org>

As CAN skbs don't use IP checksums the skb->csum_start variable was used to
store the can-gw CAN frame time-to-live counter together with
skb->ip_summed set to CHECKSUM_UNNECESSARY.

Remove the 'hack' using the skb->csum_start variable and move the content
to can_skb_ext::can_gw_hops of the CAN skb extensions.

The module parameter 'max_hops' has been reduced to a single byte to fit
can_skb_ext::can_gw_hops as the maximum value to be stored is 6.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-6-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

This patch removes struct can_skb_priv which was stored at skb->head and
the can_skb_reserve() helper which was used to shift skb->head.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-5-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

When routing CAN frames over different CAN interfaces the interface index
skb->iif is overwritten with every single hop. To prevent sending a CAN
frame back to its originating (first) incoming CAN interface another
ifindex variable is needed, which was stored in can_skb_priv::ifindex.

Move the can_skb_priv::ifindex content to can_skb_ext::can_iif.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-3-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

To remove the private CAN bus skb headroom infrastructure 8 bytes need to
be stored in the skb. The skb extensions are a common pattern and an easy
and efficient way to hold private data travelling along with the skb. We
only need the skb_ext_add() and skb_ext_find() functions to allocate and
access CAN specific content as the skb helpers to copy/clone/free skbs
automatically take care of skb extensions and their final removal.

This patch introduces the complete CAN skb extensions infrastructure:
- add struct can_skb_ext in new file include/net/can.h
- add include/net/can.h in MAINTAINERS
- add SKB_EXT_CAN to skbuff.c and skbuff.h
- select SKB_EXTENSIONS in Kconfig when CONFIG_CAN is enabled
- check for existing CAN skb extensions in can_rcv() in af_can.c
- add CAN skb extensions allocation at every skb_alloc() location
- duplicate the skb extensions if cloning outgoing skbs (framelen/gw_hops)
- introduce can_skb_ext_add() and can_skb_ext_find() helpers

The patch also corrects an indention issue in the original code from 2018:
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202602010426.PnGrYAk3-lkp@intel.com/
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-2-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The can_skb_priv::skbcnt variable is used to identify CAN skbs in the RX
path analogue to the skb->hash.

As the skb hash is not filled in CAN skbs move the private skbcnt value to
skb->hash and set skb->sw_hash accordingly. The skb->hash is a value used
for RPS to identify skbs. Use it as intended.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-1-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Since j1939_session_deactivate_activate_next() in j1939_tp_rxtimer() is
called only when the timer is enabled, we need to call
j1939_session_deactivate_activate_next() if we cancelled the timer.
Otherwise, refcount for j1939_session leaks, which will later appear as

| unregister_netdevice: waiting for vcan0 to become free. Usage count = 2.

problem.

Reported-by: syzbot <syzbot+881d65229ca4f9ae8c84@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=881d65229ca4f9ae8c84
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Link: https://patch.msgid.link/b1212653-8fa1-44e1-be9d-12f950fb3a07@I-love.SAKURA.ne.jp
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>