linux-toradex.git/net/core/ethtool.c, branch v5.5

net: Zeroing the structure ethtool_wolinfo in ethtool_get_wol()

2019-10-26T18:20:10+00:00

memset() the structure ethtool_wolinfo that has padded bytes
but the padded bytes have not been zeroed out.

Signed-off-by: zhanglin 
Signed-off-by: David S. Miller

ethtool: implement Energy Detect Powerdown support via phy-tunable

2019-09-16T20:02:45+00:00

The `phy_tunable_id` has been named `ETHTOOL_PHY_EDPD` since it looks like
this feature is common across other PHYs (like EEE), and defining
`ETHTOOL_PHY_ENERGY_DETECT_POWER_DOWN` seems too long.

The way EDPD works, is that the RX block is put to a lower power mode,
except for link-pulse detection circuits. The TX block is also put to low
power mode, but the PHY wakes-up periodically to send link pulses, to avoid
lock-ups in case the other side is also in EDPD mode.

Currently, there are 2 PHY drivers that look like they could use this new
PHY tunable feature: the `adin` && `micrel` PHYs.

The ADIN's datasheet mentions that TX pulses are at intervals of 1 second
default each, and they can be disabled. For the Micrel KSZ9031 PHY, the
datasheet does not mention whether they can be disabled, but mentions that
they can modified.

The way this change is structured, is similar to the PHY tunable downshift
control:
* a `ETHTOOL_PHY_EDPD_DFLT_TX_MSECS` value is exposed to cover a default
  TX interval; some PHYs could specify a certain value that makes sense
* `ETHTOOL_PHY_EDPD_NO_TX` would disable TX when EDPD is enabled
* `ETHTOOL_PHY_EDPD_DISABLE` will disable EDPD

As noted by the `ETHTOOL_PHY_EDPD_DFLT_TX_MSECS` the interval unit is 1
millisecond, which should cover a reasonable range of intervals:
 - from 1 millisecond, which does not sound like much of a power-saver
 - to ~65 seconds which is quite a lot to wait for a link to come up when
   plugging a cable

Reviewed-by: Andrew Lunn 
Reviewed-by: Florian Fainelli 
Signed-off-by: Alexandru Ardelean 
Signed-off-by: David S. Miller

net: ethtool: Allow parsing ETHER_FLOW types when using flow_rule

2019-06-27T16:38:17+00:00

When parsing an ethtool_rx_flow_spec, users can specify an ethernet flow
which could contain matches based on the ethernet header, such as the
MAC address, the VLAN tag or the ethertype.

ETHER_FLOW uses the src and dst ethernet addresses, along with the
ethertype as keys. Matches based on the vlan tag are also possible, but
they are specified using the special FLOW_EXT flag.

Signed-off-by: Maxime Chevallier 
Acked-by: Pablo Neira Ayuso 
Signed-off-by: David S. Miller

net: ethtool: Allow matching on vlan DEI bit

2019-06-12T17:09:56+00:00

Using ethtool, users can specify a classification action matching on the
full vlan tag, which includes the DEI bit (also previously called CFI).

However, when converting the ethool_flow_spec to a flow_rule, we use
dissector keys to represent the matching patterns.

Since the vlan dissector key doesn't include the DEI bit, this
information was silently discarded when translating the ethtool
flow spec in to a flow_rule.

This commit adds the DEI bit into the vlan dissector key, and allows
propagating the information to the driver when parsing the ethtool flow
spec.

Fixes: eca4205f9ec3 ("ethtool: add ethtool_rx_flow_spec to flow_rule structure translator")
Reported-by: Michał Mirosław 
Signed-off-by: Maxime Chevallier 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2019-06-07T16:29:14+00:00

Pull networking fixes from David Miller:

1) Free AF_PACKET po->rollover properly, from Willem de Bruijn.

2) Read SFP eeprom in max 16 byte increments to avoid problems with
some SFP modules, from Russell King.

3) Fix UDP socket lookup wrt. VRF, from Tim Beale.

4) Handle route invalidation properly in s390 qeth driver, from Julian
Wiedmann.

5) Memory leak on unload in RDS, from Zhu Yanjun.

6) sctp_process_init leak, from Neil HOrman.

7) Fix fib_rules rule insertion semantic change that broke Android,
from Hangbin Liu.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits)
pktgen: do not sleep with the thread lock held.
net: mvpp2: Use strscpy to handle stat strings
net: rds: fix memory leak in rds_ib_flush_mr_pool
ipv6: fix EFAULT on sendto with icmpv6 and hdrincl
ipv6: use READ_ONCE() for inet->hdrincl as in ipv4
Revert "fib_rules: return 0 directly if an exactly same rule exists when NLM_F_EXCL not supplied"
net: aquantia: fix wol configuration not applied sometimes
ethtool: fix potential userspace buffer overflow
Fix memory leak in sctp_process_init
net: rds: fix memory leak when unload rds_rdma
ipv6: fix the check before getting the cookie in rt6_get_cookie
ipv4: not do cache for local delivery if bc_forwarding is enabled
s390/qeth: handle error when updating TX queue count
s390/qeth: fix VLAN attribute in bridge_hostnotify udev event
s390/qeth: check dst entry before use
s390/qeth: handle limited IPv4 broadcast in L3 TX path
net: fix indirect calls helpers for ptype list hooks.
net: ipvlan: Fix ipvlan device tso disabled while NETIF_F_IP_CSUM is set
udp: only choose unbound UDP socket for multicast when not in a VRF
net/tls: replace the sleeping lock around RX resync with a bit lock
...

ethtool: fix potential userspace buffer overflow

2019-06-06T00:15:27+00:00

ethtool_get_regs() allocates a buffer of size ops->get_regs_len(),
and pass it to the kernel driver via ops->get_regs() for filling.

There is no restriction about what the kernel drivers can or cannot do
with the open ethtool_regs structure. They usually set regs->version
and ignore regs->len or set it to the same size as ops->get_regs_len().

But if userspace allocates a smaller buffer for the registers dump,
we would cause a userspace buffer overflow in the final copy_to_user()
call, which uses the regs.len value potentially reset by the driver.

To fix this, make this case obvious and store regs.len before calling
ops->get_regs(), to only copy as much data as requested by userspace,
up to the value returned by ops->get_regs_len().

While at it, remove the redundant check for non-null regbuf.

Signed-off-by: Vivien Didelot 
Reviewed-by: Michal Kubecek 
Signed-off-by: David S. Miller

Merge tag 'spdx-5.2-rc3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2019-05-31T15:34:32+00:00

Pull yet more SPDX updates from Greg KH:
 "Here is another set of reviewed patches that adds SPDX tags to
  different kernel files, based on a set of rules that are being used to
  parse the comments to try to determine that the license of the file is
  "GPL-2.0-or-later" or "GPL-2.0-only". Only the "obvious" versions of
  these matches are included here, a number of "non-obvious" variants of
  text have been found but those have been postponed for later review
  and analysis.

  There is also a patch in here to add the proper SPDX header to a bunch
  of Kbuild files that we have missed in the past due to new files being
  added and forgetting that Kbuild uses two different file names for
  Makefiles. This issue was reported by the Kbuild maintainer.

  These patches have been out for review on the linux-spdx@vger mailing
  list, and while they were created by automatic tools, they were
  hand-verified by a bunch of different people, all whom names are on
  the patches are reviewers"

* tag 'spdx-5.2-rc3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (82 commits)
  treewide: Add SPDX license identifier - Kbuild
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 225
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 224
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 223
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 222
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 221
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 220
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 218
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 217
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 216
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 215
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 214
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 213
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 211
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 210
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 209
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 207
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 206
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 203
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201
  ...

ethtool: Check for vlan etype or vlan tci when parsing flow_rule

2019-05-30T22:04:55+00:00

When parsing an ethtool flow spec to build a flow_rule, the code checks
if both the vlan etype and the vlan tci are specified by the user to add
a FLOW_DISSECTOR_KEY_VLAN match.

However, when the user only specified a vlan etype or a vlan tci, this
check silently ignores these parameters.

For example, the following rule :

ethtool -N eth0 flow-type udp4 vlan 0x0010 action -1 loc 0

will result in no error being issued, but the equivalent rule will be
created and passed to the NIC driver :

ethtool -N eth0 flow-type udp4 action -1 loc 0

In the end, neither the NIC driver using the rule nor the end user have
a way to know that these keys were dropped along the way, or that
incorrect parameters were entered.

This kind of check should be left to either the driver, or the ethtool
flow spec layer.

This commit makes so that ethtool parameters are forwarded as-is to the
NIC driver.

Since none of the users of ethtool_rx_flow_rule_create are using the
VLAN dissector, I don't think this qualifies as a regression.

Fixes: eca4205f9ec3 ("ethtool: add ethtool_rx_flow_spec to flow_rule structure translator")
Signed-off-by: Maxime Chevallier 
Acked-by: Pablo Neira Ayuso 
Signed-off-by: David S. Miller

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2019-04-05T21:14:19+00:00

Minor comment merge conflict in mlx5.

Staging driver has a fixup due to the skb->xmit_more changes
in 'net-next', but was removed in 'net'.

Signed-off-by: David S. Miller