linux-toradex.git/net/core/skbuff.c, branch v3.4.108

net: Correctly set segment mac_len in skb_segment().

2014-08-14T00:42:36+00:00

[ Upstream commit fcdfe3a7fa4cb74391d42b6a26dc07c20dab1d82 ]

When performing segmentation, the mac_len value is copied right
out of the original skb.  However, this value is not always set correctly
(like when the packet is VLAN-tagged) and we'll end up copying a bad
value.

One way to demonstrate this is to configure a VM which tags
packets internally and turn off VLAN acceleration on the forwarding
bridge port.  The packets show up corrupt like this:
16:18:24.985548 52:54:00:ab:be:25 > 52:54:00:26:ce:a3, ethertype 802.1Q
(0x8100), length 1518: vlan 100, p 0, ethertype 0x05e0,
        0x0000:  8cdb 1c7c 8cdb 0064 4006 b59d 0a00 6402 ...|...d@.....d.
        0x0010:  0a00 6401 9e0d b441 0a5e 64ec 0330 14fa ..d....A.^d..0..
        0x0020:  29e3 01c9 f871 0000 0101 080a 000a e833)....q.........3
        0x0030:  000f 8c75 6e65 7470 6572 6600 6e65 7470 ...unetperf.netp
        0x0040:  6572 6600 6e65 7470 6572 6600 6e65 7470 erf.netperf.netp
        0x0050:  6572 6600 6e65 7470 6572 6600 6e65 7470 erf.netperf.netp
        0x0060:  6572 6600 6e65 7470 6572 6600 6e65 7470 erf.netperf.netp
        ...

This also leads to awful throughput as GSO packets are dropped and
cause retransmissions.

The solution is to set the mac_len using the values already available
in then new skb.  We've already adjusted all of the header offset, so we
might as well correctly figure out the mac_len using skb_reset_mac_len().
After this change, packets are segmented correctly and performance
is restored.

CC: Eric Dumazet 
Signed-off-by: Vlad Yasevich 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

skbuff: skb_segment: orphan frags before copying

2014-07-01T03:01:33+00:00

commit 1fd819ecb90cc9b822cd84d3056ddba315d3340f upstream.

skb_segment copies frags around, so we need
to copy them carefully to avoid accessing
user memory after reporting completion to userspace
through a callback.

skb_segment doesn't normally happen on datapath:
TSO needs to be disabled - so disabling zero copy
in this case does not look like a big deal.

Signed-off-by: Michael S. Tsirkin 
Acked-by: Herbert Xu 
Signed-off-by: David S. Miller 
[bwh: Backported to 3.2.  As skb_segment() only supports page-frags *or* a
 frag list, there is no need for the additional frag_skb pointer or the
 preparatory renaming.]
Signed-off-by: Ben Hutchings 
Signed-off-by: Greg Kroah-Hartman

skbuff: export skb_copy_ubufs

2014-07-01T03:01:33+00:00

commit dcc0fb782b3a6e2abfeaaeb45dd88ed09596be0f upstream.

Export skb_copy_ubufs so that modules can orphan frags.

Signed-off-by: Michael S. Tsirkin 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

skb: Add inline helper for getting the skb end offset from head

2014-06-07T23:02:00+00:00

[ Upstream commit ec47ea82477404631d49b8e568c71826c9b663ac ]

With the recent changes for how we compute the skb truesize it occurs to me
we are probably going to have a lot of calls to skb_end_pointer -
skb->head.  Instead of running all over the place doing that it would make
more sense to just make it a separate inline skb_end_offset(skb) that way
we can return the correct value without having gcc having to do all the
optimization to cancel out skb->head - skb->head.

Signed-off-by: Alexander Duyck 
Acked-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: core: don't account for udp header size when computing seglen

2014-06-07T23:01:58+00:00

[ Upstream commit 6d39d589bb76ee8a1c6cde6822006ae0053decff ]

In case of tcp, gso_size contains the tcpmss.

For UFO (udp fragmentation offloading) skbs, gso_size is the fragment
payload size, i.e. we must not account for udp header size.

Otherwise, when using virtio drivers, a to-be-forwarded UFO GSO packet
will be needlessly fragmented in the forward path, because we think its
individual segments are too large for the outgoing link.

Fixes: fe6cc55f3a9a053 ("net: ip, ipv6: handle gso skbs in forwarding path")
Cc: Eric Dumazet 
Reported-by: Tobias Brunner 
Signed-off-by: Florian Westphal 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: add and use skb_gso_transport_seglen()

2014-03-11T23:09:59+00:00

commit de960aa9ab4decc3304959f69533eef64d05d8e8 upstream.

[ no skb_gso_seglen helper in 3.4, leave tbf alone ]

This moves part of Eric Dumazets skb_gso_seglen helper from tbf sched to
skbuff core so it may be reused by upcoming ip forwarding path patch.

Signed-off-by: Florian Westphal 
Acked-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

splice: fix racy pipe->buffers uses

2012-07-16T16:04:42+00:00

commit 047fe3605235888f3ebcda0c728cb31937eadfe6 upstream.

Dave Jones reported a kernel BUG at mm/slub.c:3474! triggered
by splice_shrink_spd() called from vmsplice_to_pipe()

commit 35f3d14dbbc5 (pipe: add support for shrinking and growing pipes)
added capability to adjust pipe->buffers.

Problem is some paths don't hold pipe mutex and assume pipe->buffers
doesn't change for their duration.

Fix this by adding nr_pages_max field in struct splice_pipe_desc, and
use it in place of pipe->buffers where appropriate.

splice_shrink_spd() loses its struct pipe_inode_info argument.

Reported-by: Dave Jones 
Signed-off-by: Eric Dumazet 
Cc: Jens Axboe 
Cc: Alexander Viro 
Cc: Tom Herbert 
Tested-by: Dave Jones 
Signed-off-by: Jens Axboe 
[bwh: Backported to 3.2:
 - Adjust context in vmsplice_to_pipe()
 - Update one more call to splice_shrink_spd(), from skb_splice_bits()]
Signed-off-by: Ben Hutchings 
Signed-off-by: Greg Kroah-Hartman

net: allow pskb_expand_head() to get maximum tailroom

2012-04-11T14:10:43+00:00

Marc Merlin reported many order-1 allocations failures in TX path on its
wireless setup, that dont make any sense with MTU=1500 network, and non
SG capable hardware.

Turns out part of the problem comes from pskb_expand_head() not using
ksize() to get exact head size given by kmalloc(). Doing the same thing
than __alloc_skb() allows more tailroom in skb and can prevent future
reallocations.

As a bonus, struct skb_shared_info becomes cache line aligned.

Reported-by: Marc MERLIN 
Tested-by: Marc MERLIN 
Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller

net: fix a race in sock_queue_err_skb()

2012-04-06T09:07:21+00:00

As soon as an skb is queued into socket error queue, another thread
can consume it, so we are not allowed to reference skb anymore, or risk
use after free.

Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller

Merge tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system

2012-03-28T22:58:21+00:00

Pull "Disintegrate and delete asm/system.h" from David Howells:
 "Here are a bunch of patches to disintegrate asm/system.h into a set of
  separate bits to relieve the problem of circular inclusion
  dependencies.

  I've built all the working defconfigs from all the arches that I can
  and made sure that they don't break.

  The reason for these patches is that I recently encountered a circular
  dependency problem that came about when I produced some patches to
  optimise get_order() by rewriting it to use ilog2().

  This uses bitops - and on the SH arch asm/bitops.h drags in
  asm-generic/get_order.h by a circuituous route involving asm/system.h.

  The main difficulty seems to be asm/system.h.  It holds a number of
  low level bits with no/few dependencies that are commonly used (eg.
  memory barriers) and a number of bits with more dependencies that
  aren't used in many places (eg.  switch_to()).

  These patches break asm/system.h up into the following core pieces:

    (1) asm/barrier.h

        Move memory barriers here.  This already done for MIPS and Alpha.

    (2) asm/switch_to.h

        Move switch_to() and related stuff here.

    (3) asm/exec.h

        Move arch_align_stack() here.  Other process execution related bits
        could perhaps go here from asm/processor.h.

    (4) asm/cmpxchg.h

        Move xchg() and cmpxchg() here as they're full word atomic ops and
        frequently used by atomic_xchg() and atomic_cmpxchg().

    (5) asm/bug.h

        Move die() and related bits.

    (6) asm/auxvec.h

        Move AT_VECTOR_SIZE_ARCH here.

  Other arch headers are created as needed on a per-arch basis."

Fixed up some conflicts from other header file cleanups and moving code
around that has happened in the meantime, so David's testing is somewhat
weakened by that.  We'll find out anything that got broken and fix it..

* tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits)
  Delete all instances of asm/system.h
  Remove all #inclusions of asm/system.h
  Add #includes needed to permit the removal of asm/system.h
  Move all declarations of free_initmem() to linux/mm.h
  Disintegrate asm/system.h for OpenRISC
  Split arch_align_stack() out from asm-generic/system.h
  Split the switch_to() wrapper out of asm-generic/system.h
  Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h
  Create asm-generic/barrier.h
  Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h
  Disintegrate asm/system.h for Xtensa
  Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt]
  Disintegrate asm/system.h for Tile
  Disintegrate asm/system.h for Sparc
  Disintegrate asm/system.h for SH
  Disintegrate asm/system.h for Score
  Disintegrate asm/system.h for S390
  Disintegrate asm/system.h for PowerPC
  Disintegrate asm/system.h for PA-RISC
  Disintegrate asm/system.h for MN10300
  ...