linux-toradex.git/net/core, branch v4.9.96

net: fool proof dev_valid_name()

2018-04-13T17:48:34+00:00

[ Upstream commit a9d48205d0aedda021fc3728972a9e9934c2b9de ]

We want to use dev_valid_name() to validate tunnel names,
so better use strnlen(name, IFNAMSIZ) than strlen(name) to make
sure to not upset KASAN.

Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: fix possible out-of-bound read in skb_network_protocol()

2018-04-13T17:48:32+00:00

[ Upstream commit 1dfe82ebd7d8fd43dba9948fdfb31f145014baa0 ]

skb mac header is not necessarily set at the time skb_network_protocol()
is called. Use skb->data instead.

BUG: KASAN: slab-out-of-bounds in skb_network_protocol+0x46b/0x4b0 net/core/dev.c:2739
Read of size 2 at addr ffff8801b3097a0b by task syz-executor5/14242

CPU: 1 PID: 14242 Comm: syz-executor5 Not tainted 4.16.0-rc6+ #280
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x194/0x24d lib/dump_stack.c:53
 print_address_description+0x73/0x250 mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report+0x23c/0x360 mm/kasan/report.c:412
 __asan_report_load_n_noabort+0xf/0x20 mm/kasan/report.c:443
 skb_network_protocol+0x46b/0x4b0 net/core/dev.c:2739
 harmonize_features net/core/dev.c:2924 [inline]
 netif_skb_features+0x509/0x9b0 net/core/dev.c:3011
 validate_xmit_skb+0x81/0xb00 net/core/dev.c:3084
 validate_xmit_skb_list+0xbf/0x120 net/core/dev.c:3142
 packet_direct_xmit+0x117/0x790 net/packet/af_packet.c:256
 packet_snd net/packet/af_packet.c:2944 [inline]
 packet_sendmsg+0x3aed/0x60b0 net/packet/af_packet.c:2969
 sock_sendmsg_nosec net/socket.c:629 [inline]
 sock_sendmsg+0xca/0x110 net/socket.c:639
 ___sys_sendmsg+0x767/0x8b0 net/socket.c:2047
 __sys_sendmsg+0xe5/0x210 net/socket.c:2081

Fixes: 19acc327258a ("gso: Handle Trans-Ether-Bridging protocol in skb_network_protocol()")
Signed-off-by: Eric Dumazet 
Cc: Pravin B Shelar 
Reported-by: Reported-by: syzbot 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

skbuff: only inherit relevant tx_flags

2018-04-13T17:48:25+00:00

[ Upstream commit fff88030b3ff930ca7a3d74acfee0472f33887ea ]

When inheriting tx_flags from one skbuff to another, always apply a
mask to avoid overwriting unrelated other bits in the field.

The two SKBTX_SHARED_FRAG cases clears all other bits. In practice,
tx_flags are zero at this point now. But this is fragile. Timestamp
flags are set, for instance, if in tcp_gso_segment, after this clear
in skb_segment.

The SKBTX_ANY_TSTAMP mask in __skb_tstamp_tx ensures that new
skbs do not accidentally inherit flags such as SKBTX_SHARED_FRAG.

Signed-off-by: Willem de Bruijn 
Acked-by: Soheil Hassas Yeganeh 
Acked-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

skbuff: return -EMSGSIZE in skb_to_sgvec to prevent overflow

2018-04-13T17:48:19+00:00

[ Upstream commit 48a1df65334b74bd7531f932cca5928932abf769 ]

This is a defense-in-depth measure in response to bugs like
4d6fa57b4dab ("macsec: avoid heap overflow in skb_to_sgvec"). There's
not only a potential overflow of sglist items, but also a stack overflow
potential, so we fix this by limiting the amount of recursion this function
is allowed to do. Not actually providing a bounded base case is a future
disaster that we can easily avoid here.

As a small matter of house keeping, we take this opportunity to move the
documentation comment over the actual function the documentation is for.

While this could be implemented by using an explicit stack of skbuffs,
when implementing this, the function complexity increased considerably,
and I don't think such complexity and bloat is actually worth it. So,
instead I built this and tested it on x86, x86_64, ARM, ARM64, and MIPS,
and measured the stack usage there. I also reverted the recent MIPS
changes that give it a separate IRQ stack, so that I could experience
some worst-case situations. I found that limiting it to 24 layers deep
yielded a good stack usage with room for safety, as well as being much
deeper than any driver actually ever creates.

Signed-off-by: Jason A. Donenfeld 
Cc: Steffen Klassert 
Cc: Herbert Xu 
Cc: "David S. Miller" 
Cc: David Howells 
Cc: Sabrina Dubroca 
Cc: "Michael S. Tsirkin" 
Cc: Jason Wang 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

net: move somaxconn init from sysctl code

2018-04-13T17:48:06+00:00

[ Upstream commit 7c3f1875c66fbc19762760097cabc91849ea0bbb ]

The default value for somaxconn is set in sysctl_core_net_init(), but this
function is not called when kernel is configured without CONFIG_SYSCTL.

This results in the kernel not being able to accept TCP connections,
because the backlog has zero size. Usually, the user ends up with:
"TCP: request_sock_TCP: Possible SYN flooding on port 7. Dropping request.  Check SNMP counters."
If SYN cookies are not enabled the connection is rejected.

Before ef547f2ac16 (tcp: remove max_qlen_log), the effects were less
severe, because the backlog was always at least eight slots long.

Signed-off-by: Roman Kapl 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

neighbour: update neigh timestamps iff update is effective

2018-04-13T17:47:59+00:00

[ Upstream commit 77d7123342dcf6442341b67816321d71da8b2b16 ]

It's a common practice to send gratuitous ARPs after moving an
IP address to another device to speed up healing of a service. To
fulfill service availability constraints, the timing of network peers
updating their caches to point to a new location of an IP address can be
particularly important.

Sometimes neigh_update calls won't touch neither lladdr nor state, for
example if an update arrives in locktime interval. The neigh->updated
value is tested by the protocol specific neigh code, which in turn
will influence whether NEIGH_UPDATE_F_OVERRIDE gets set in the
call to neigh_update() or not. As a result, we may effectively ignore
the update request, bailing out of touching the neigh entry, except that
we still bump its timestamps inside neigh_update.

This may be a problem for updates arriving in quick succession. For
example, consider the following scenario:

A service is moved to another device with its IP address. The new device
sends three gratuitous ARP requests into the network with ~1 seconds
interval between them. Just before the first request arrives to one of
network peer nodes, its neigh entry for the IP address transitions from
STALE to DELAY.  This transition, among other things, updates
neigh->updated. Once the kernel receives the first gratuitous ARP, it
ignores it because its arrival time is inside the locktime interval. The
kernel still bumps neigh->updated. Then the second gratuitous ARP
request arrives, and it's also ignored because it's still in the (new)
locktime interval. Same happens for the third request. The node
eventually heals itself (after delay_first_probe_time seconds since the
initial transition to DELAY state), but it just wasted some time and
require a new ARP request/reply round trip. This unfortunate behaviour
both puts more load on the network, as well as reduces service
availability.

This patch changes neigh_update so that it bumps neigh->updated (as well
as neigh->confirmed) only once we are sure that either lladdr or entry
state will change). In the scenario described above, it means that the
second gratuitous ARP request will actually update the entry lladdr.

Ideally, we would update the neigh entry on the very first gratuitous
ARP request. The locktime mechanism is designed to ignore ARP updates in
a short timeframe after a previous ARP update was honoured by the kernel
layer. This would require tracking timestamps for state transitions
separately from timestamps when actual updates are received. This would
probably involve changes in neighbour struct. Therefore, the patch
doesn't tackle the issue of the first gratuitous APR ignored, leaving
it for a follow-up.

Signed-off-by: Ihar Hrachyshka 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

skbuff: Fix not waking applications when errors are enqueued

2018-03-31T16:11:34+00:00

[ Upstream commit 6e5d58fdc9bedd0255a8781b258f10bbdc63e975 ]

When errors are enqueued to the error queue via sock_queue_err_skb()
function, it is possible that the waiting application is not notified.

Calling 'sk->sk_data_ready()' would not notify applications that
selected only POLLERR events in poll() (for example).

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Randy E. Witt 
Reviewed-by: Eric Dumazet 
Signed-off-by: Vinicius Costa Gomes 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: use skb_to_full_sk() in skb_update_prio()

2018-03-31T16:11:33+00:00

[ Upstream commit 4dcb31d4649df36297296b819437709f5407059c ]

Andrei Vagin reported a KASAN: slab-out-of-bounds error in
skb_update_prio()

Since SYNACK might be attached to a request socket, we need to
get back to the listener socket.
Since this listener is manipulated without locks, add const
qualifiers to sock_cgroup_prioidx() so that the const can also
be used in skb_update_prio()

Also add the const qualifier to sock_cgroup_classid() for consistency.

Fixes: ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener")
Signed-off-by: Eric Dumazet 
Reported-by: Andrei Vagin 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: fix race on decreasing number of TX queues

2018-03-11T15:21:31+00:00

[ Upstream commit ac5b70198adc25c73fba28de4f78adcee8f6be0b ]

netif_set_real_num_tx_queues() can be called when netdev is up.
That usually happens when user requests change of number of
channels/rings with ethtool -L.  The procedure for changing
the number of queues involves resetting the qdiscs and setting
dev->num_tx_queues to the new value.  When the new value is
lower than the old one, extra care has to be taken to ensure
ordering of accesses to the number of queues vs qdisc reset.

Currently the queues are reset before new dev->num_tx_queues
is assigned, leaving a window of time where packets can be
enqueued onto the queues going down, leading to a likely
crash in the drivers, since most drivers don't check if TX
skbs are assigned to an active queue.

Fixes: e6484930d7c7 ("net: allocate tx queues in register_netdevice")
Signed-off-by: Jakub Kicinski 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: avoid skb_warn_bad_offload on IS_ERR

2018-02-25T10:05:43+00:00

commit 8d74e9f88d65af8bb2e095aff506aa6eac755ada upstream.

skb_warn_bad_offload warns when packets enter the GSO stack that
require skb_checksum_help or vice versa. Do not warn on arbitrary
bad packets. Packet sockets can craft many. Syzkaller was able to
demonstrate another one with eth_type games.

In particular, suppress the warning when segmentation returns an
error, which is for reasons other than checksum offload.

See also commit 36c92474498a ("net: WARN if skb_checksum_help() is
called on skb requiring segmentation") for context on this warning.

Signed-off-by: Willem de Bruijn 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman