linux-toradex.git/net/dsa/dsa.c, branch v4.10

of_mdio: add helper to deregister fixed-link PHYs

2016-11-30T04:17:02+00:00

Add helper to deregister fixed-link PHYs registered using
of_phy_register_fixed_link().

Convert the two drivers that care to deregister their fixed-link PHYs to
use the new helper, but note that most drivers currently fail to do so.

Signed-off-by: Johan Hovold 
Signed-off-by: David S. Miller

net: dsa: fix fixed-link-phy device leaks

2016-11-28T01:01:15+00:00

Make sure to drop the reference taken by of_phy_find_device() when
registering and deregistering the fixed-link PHY-device.

Fixes: 39b0c705195e ("net: dsa: Allow configuration of CPU & DSA port
speeds/duplex")
Signed-off-by: Johan Hovold 
Signed-off-by: David S. Miller

net-next: dsa: make the set_addr() operation optional

2016-09-20T08:47:44+00:00

Only 1 of the 3 drivers currently has a set_addr() operation. Make the
set_addr() callback optional to reduce the amount of empty stubs inside
the drivers.

Signed-off-by: John Crispin 
Signed-off-by: David S. Miller

net-next: dsa: add Qualcomm tag RX/TX handler

2016-09-16T08:31:51+00:00

Add support for the 2-bytes Qualcomm tag that gigabit switches such as
the QCA8337/N might insert when receiving packets, or that we need
to insert while targeting specific switch ports. The tag is inserted
directly behind the ethernet header.

Reviewed-by: Andrew Lunn 
Reviewed-by: Florian Fainelli 
Signed-off-by: John Crispin 
Signed-off-by: David S. Miller

net: dsa: rename switch operations structure

2016-08-25T04:45:39+00:00

Now that the dsa_switch_driver structure contains only function pointers
as it is supposed to, rename it to the more appropriate dsa_switch_ops,
uniformly to any other operations structure in the kernel.

No functional changes here, basically just the result of something like:
s/dsa_switch_driver *drv/dsa_switch_ops *ops/g

However keep the {un,}register_switch_driver functions and their
dsa_switch_drivers list as is, since they represent the -- likely to be
deprecated soon -- legacy DSA registration framework.

In the meantime, also fix the following checks from checkpatch.pl to
make it happy with this patch:

    CHECK: Comparison to NULL could be written "!ops"
    #403: FILE: net/dsa/dsa.c:470:
    +	if (ops == NULL) {

    CHECK: Comparison to NULL could be written "ds->ops->get_strings"
    #773: FILE: net/dsa/slave.c:697:
    +		if (ds->ops->get_strings != NULL)

    CHECK: Comparison to NULL could be written "ds->ops->get_ethtool_stats"
    #824: FILE: net/dsa/slave.c:785:
    +	if (ds->ops->get_ethtool_stats != NULL)

    CHECK: Comparison to NULL could be written "ds->ops->get_sset_count"
    #835: FILE: net/dsa/slave.c:798:
    +		if (ds->ops->get_sset_count != NULL)

    total: 0 errors, 0 warnings, 4 checks, 784 lines checked

Signed-off-by: Vivien Didelot 
Acked-by: Florian Fainelli 
Signed-off-by: David S. Miller

net: dsa: Allow the DSA driver to indicate the tag protocol

2016-08-23T04:08:08+00:00

DSA drivers may drive different families of switches which need
different tag protocol. Rather than hard code the tag protocol in the
driver structure, have a callback for the DSA core to call.

Signed-off-by: Andrew Lunn 
Reviewed-by: Vivien Didelot 
Signed-off-by: David S. Miller

net: dsa: bcm_sf2: Make it a real platform device driver

2016-08-20T00:15:36+00:00

The Broadcom Starfighter 2 switch driver should be a proper platform
driver, now that the DSA code has been updated to allow that, register a
switch device, feed it with the proper configuration data coming from
Device Tree and register our switch device with DSA.

The bulk of the changes consist in moving what bcm_sf2_sw_setup() did
into the platform driver probe function.

Signed-off-by: Florian Fainelli 
Signed-off-by: David S. Miller

net: dsa: Export suspend/resume functions

2016-08-20T00:15:36+00:00

In preparation for allowing switch drivers to implement system-wide
suspend/resume functions, export dsa_switch_suspend and
dsa_switch_resume() such that these are callable from the appropriate
driver specific suspend/resume functions.

Reviewed-by: Andrew Lunn 
Tested-by: Vivien Didelot 
Signed-off-by: Florian Fainelli 
Signed-off-by: David S. Miller

net: dsa: initialize the routing table

2016-07-09T03:59:49+00:00

The routing table of every switch in a tree is currently initialized to
all zeros. This is an issue since 0 is a valid port number.

Add a DSA_RTABLE_NONE=-1 constant to initialize the signed values of the
routing table pointing to other switches.

This fixes the device mapping of the mv88e6xxx driver where the port
pointing to the switch itself and to non-existent switches was wrongly
configured to be 0. It is now set to the expected 0xf value.

Signed-off-by: Vivien Didelot 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller

net: dsa: Initialize CPU port ethtool ops per tree

2016-06-08T18:23:42+00:00

Now that we can properly support multiple distinct trees in the system,
using a global variable: dsa_cpu_port_ethtool_ops is getting clobbered
as soon as the second switch tree gets probed, and we don't want that.

We need to move this to be dynamically allocated, and since we can't
really be comparing addresses anymore to determine first time
initialization versus any other times, just move this to dsa.c and
dsa2.c where the remainder of the dst/ds initialization happens.

The operations teardown restores the master netdev's ethtool_ops to its
original ethtool_ops pointer (typically within the Ethernet driver)

Signed-off-by: Florian Fainelli 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller