linux-toradex.git/net/dsa, branch v3.18.18 Linux kernel for Apalis and Colibri modules net: dsa: slave: Fix autoneg for phys on switch MDIO bus 2014-11-06T20:06:28+00:00 Andrew Lunn andrew@lunn.ch 2014-11-05T18:47:28+00:00 b31f65fb4383a49bdcfa465176754b37e44e1e17 When the ports phys are connected to the switches internal MDIO bus, we need to connect the phy to the slave netdev, otherwise auto-negotiation etc, does not work. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 
When the ports phys are connected to the switches internal MDIO bus,
we need to connect the phy to the slave netdev, otherwise
auto-negotiation etc, does not work.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: Error out on tagging protocol mismatches 2014-10-28T19:27:54+00:00 Andrew Lunn andrew@lunn.ch 2014-10-24T21:44:04+00:00 ae439286a0dec99cc8029868243689b5b5f3ff75 If there is a mismatch between enabled tagging protocols and the protocol the switch supports, error out, rather than continue with a situation which is unlikely to work. Signed-off-by: Andrew Lunn <andrew@lunn.ch> cc: alexander.h.duyck@intel.com Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
If there is a mismatch between enabled tagging protocols and the
protocol the switch supports, error out, rather than continue with a
situation which is unlikely to work.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
cc: alexander.h.duyck@intel.com
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Net: DSA: Fix checking for get_phy_flags function 2014-10-19T16:46:31+00:00 Andrew Lunn andrew@lunn.ch 2014-10-19T14:41:47+00:00 228b16cb13dfa2f77354a9b144a07e86e2dda01c The check for the presence or not of the optional switch function get_phy_flags() called the function, rather than checked to see if it is a NULL pointer. This causes a derefernce of a NULL pointer on all switch chips except the sf2, the only switch to implement this call. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Fixes: 6819563e646a ("net: dsa: allow switch drivers to specify phy_device::dev_flags") Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
The check for the presence or not of the optional switch function
get_phy_flags() called the function, rather than checked to see if it
is a NULL pointer. This causes a derefernce of a NULL pointer on all
switch chips except the sf2, the only switch to implement this call.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Fixes: 6819563e646a ("net: dsa: allow switch drivers to specify phy_device::dev_flags")
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: add includes for ethtool and phy_fixed definitions 2014-10-18T03:54:46+00:00 Florian Fainelli f.fainelli@gmail.com 2014-10-17T23:02:13+00:00 a28205437b41a2c1333c1599ce1e8f09af7b00d6 net/dsa/slave.c uses functions and structures declared in phy_fixed.h but does not explicitely include it, while dsa.h needs structure declarations for 'struct ethtool_wolinfo' and 'struct ethtool_eee', fix those by including the correct header files. Fixes: ec9436baedb6 ("net: dsa: allow drivers to do link adjustment") Fixes: ce31b31c68e7 ("net: dsa: allow updating fixed PHY link information") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
net/dsa/slave.c uses functions and structures declared in phy_fixed.h
but does not explicitely include it, while dsa.h needs structure
declarations for 'struct ethtool_wolinfo' and 'struct ethtool_eee', fix
those by including the correct header files.

Fixes: ec9436baedb6 ("net: dsa: allow drivers to do link adjustment")
Fixes: ce31b31c68e7 ("net: dsa: allow updating fixed PHY link information")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: do not call phy_start_aneg 2014-10-05T00:44:44+00:00 Florian Fainelli f.fainelli@gmail.com 2014-10-03T01:56:03+00:00 f7d6b96f345be7e0bd8f7651f7fe1efa5404c1e3 Commit f7f1de51edbd ("net: dsa: start and stop the PHY state machine") add calls to phy_start() in dsa_slave_open() respectively phy_stop() in dsa_slave_close(). We also call phy_start_aneg() in dsa_slave_create(), and this call is messing up with the PHY state machine, since we basically start the auto-negotiation, and later on restart it when calling phy_start(). phy_start() does not currently handle the PHY_FORCING or PHY_AN states properly, but such a fix would be too invasive for this window. Fixes: f7f1de51edbd ("net: dsa: start and stop the PHY state machine") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Commit f7f1de51edbd ("net: dsa: start and stop the PHY state machine")
add calls to phy_start() in dsa_slave_open() respectively phy_stop() in
dsa_slave_close().

We also call phy_start_aneg() in dsa_slave_create(), and this call is
messing up with the PHY state machine, since we basically start the
auto-negotiation, and later on restart it when calling phy_start().
phy_start() does not currently handle the PHY_FORCING or PHY_AN states
properly, but such a fix would be too invasive for this window.

Fixes: f7f1de51edbd ("net: dsa: start and stop the PHY state machine")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: Fix build warning for !PM_SLEEP 2014-10-01T19:24:00+00:00 Thierry Reding treding@nvidia.com 2014-10-01T11:59:00+00:00 e506d405ac7d34d03996c97ac68aa2ac010be64a The dsa_switch_suspend() and dsa_switch_resume() functions are only used when PM_SLEEP is enabled, so they need #ifdef CONFIG_PM_SLEEP protection to avoid a compiler warning. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
The dsa_switch_suspend() and dsa_switch_resume() functions are only used
when PM_SLEEP is enabled, so they need #ifdef CONFIG_PM_SLEEP protection
to avoid a compiler warning.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: allow switches driver to implement get/set EEE 2014-09-28T21:14:09+00:00 Florian Fainelli f.fainelli@gmail.com 2014-09-25T00:05:21+00:00 7905288f093ad924004609bb89a7ce1597892726 Allow switches driver to query and enable/disable EEE on a per-port basis by implementing the ethtool_{get,set}_eee settings and delegating these operations to the switch driver. set_eee() will need to coordinate with the PHY driver to make sure that EEE is enabled, the link-partner supports it and the auto-negotiation result is satisfactory. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Allow switches driver to query and enable/disable EEE on a per-port
basis by implementing the ethtool_{get,set}_eee settings and delegating
these operations to the switch driver.

set_eee() will need to coordinate with the PHY driver to make sure that
EEE is enabled, the link-partner supports it and the auto-negotiation
result is satisfactory.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: allow enabling and disable switch ports 2014-09-28T21:14:08+00:00 Florian Fainelli f.fainelli@gmail.com 2014-09-25T00:05:18+00:00 b2f2af21e37f6d12bd735c27da8942331aa9b3d7 Whenever a per-port network device is used/unused, invoke the switch driver port_enable/port_disable callbacks to allow saving as much power as possible by disabling unused parts of the switch (RX/TX logic, memory arrays, PHYs...). We supply a PHY device argument to make sure the switch driver can act on the PHY device if needed (like putting/taking the PHY out of deep low power mode). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Whenever a per-port network device is used/unused, invoke the switch
driver port_enable/port_disable callbacks to allow saving as much power
as possible by disabling unused parts of the switch (RX/TX logic, memory
arrays, PHYs...). We supply a PHY device argument to make sure the
switch driver can act on the PHY device if needed (like putting/taking
the PHY out of deep low power mode).

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: start and stop the PHY state machine 2014-09-28T21:14:08+00:00 Florian Fainelli f.fainelli@gmail.com 2014-09-25T00:05:17+00:00 f7f1de51edbdd53b09061d12758cacd9901c363e dsa_slave_open() should start the PHY library state machine for its PHY interface, and dsa_slave_close() should stop the PHY library state machine accordingly. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
dsa_slave_open() should start the PHY library state machine for its PHY
interface, and dsa_slave_close() should stop the PHY library state
machine accordingly.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: add {get, set}_wol callbacks to slave devices 2014-09-22T18:41:23+00:00 Florian Fainelli f.fainelli@gmail.com 2014-09-19T00:31:24+00:00 19e57c4e6dc6b82a3204b801f4c5f27c7d007559 Allow switch drivers to implement per-port Wake-on-LAN getter and setters. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Allow switch drivers to implement per-port Wake-on-LAN getter and
setters.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>