linux-toradex.git/net/ieee802154, branch v3.1-rc2

ieee802154: free skb buffer if dev isn't running

2011-06-30T12:18:09+00:00

Signed-off-by: Alexander Smirnov 
Signed-off-by: Dmitry Eremin-Solenikov

ieee802154: it's IEEE 802.15.4, not ZigBee

2011-06-30T12:18:09+00:00

Signed-off-by: Dmitry Eremin-Solenikov

ieee802154: support specifying hw address for created devices

2011-06-30T12:18:09+00:00

Signed-off-by: Dmitry Eremin-Solenikov

ieee802154: Don't leak memory in ieee802154_nl_fill_phy

2011-06-13T22:03:22+00:00

In net/ieee802154/nl-phy.c::ieee802154_nl_fill_phy() I see two small
issues.
1) If the allocation of 'buf' fails we may just as well return -EMSGSIZE
   directly rather than jumping to 'out:' and do a pointless kfree(0).
2) We do not free 'buf' unless we jump to one of the error labels and this
   leaks memory.
This patch should address both.

Signed-off-by: Jesper Juhl 
Acked-by: Dmitry Eremin-Solenikov 
Signed-off-by: David S. Miller

ieee802154: Remove hacked CFLAGS in net/ieee802154/Makefile

2011-04-12T22:33:23+00:00

It adds -Wall (which the kernel carefully controls already) and of all
things -DDEBUG (which should be set by other means if desired, please
we have dynamic-debug these days).

Kill this noise.

Reported-by: Dave Jones 
Signed-off-by: David S. Miller

net: RCU conversion of dev_getbyhwaddr() and arp_ioctl()

2010-12-08T18:07:24+00:00

Le dimanche 05 décembre 2010 à 09:19 +0100, Eric Dumazet a écrit :

> Hmm..
>
> If somebody can explain why RTNL is held in arp_ioctl() (and therefore
> in arp_req_delete()), we might first remove RTNL use in arp_ioctl() so
> that your patch can be applied.
>
> Right now it is not good, because RTNL wont be necessarly held when you
> are going to call arp_invalidate() ?

While doing this analysis, I found a refcount bug in llc, I'll send a
patch for net-2.6

Meanwhile, here is the patch for net-next-2.6

Your patch then can be applied after mine.

Thanks

[PATCH] net: RCU conversion of dev_getbyhwaddr() and arp_ioctl()

dev_getbyhwaddr() was called under RTNL.

Rename it to dev_getbyhwaddr_rcu() and change all its caller to now use
RCU locking instead of RTNL.

Change arp_ioctl() to use RCU instead of RTNL locking.

Note: this fix a dev refcount bug in llc

Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller

ieee802154: Fix possible NULL pointer dereference in wpan_phy_alloc

2010-05-24T06:11:07+00:00

Check for NULL pointer after kzalloc

Signed-off-by: Denis Kirjanov 
Signed-off-by: David S. Miller

ieee802154: Fix oops during ieee802154_sock_ioctl

2010-04-26T18:20:32+00:00

Trying to run izlisten (from lowpan-tools tests) on a device that does not
exists I got the oops below. The problem is that we are using get_dev_by_name
without checking if we really get a device back. We don't in this case and
writing to dev->type generates this oops.

[Oops code removed by Dmitry Eremin-Solenikov]

If possible this patch should be applied to the current -rc fixes branch.

Signed-off-by: Stefan Schmidt 
Signed-off-by: Dmitry Eremin-Solenikov 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

2010-04-06T15:34:06+00:00

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (37 commits)
  smc91c92_cs: fix the problem of "Unable to find hardware address"
  r8169: clean up my printk uglyness
  net: Hook up cxgb4 to Kconfig and Makefile
  cxgb4: Add main driver file and driver Makefile
  cxgb4: Add remaining driver headers and L2T management
  cxgb4: Add packet queues and packet DMA code
  cxgb4: Add HW and FW support code
  cxgb4: Add register, message, and FW definitions
  netlabel: Fix several rcu_dereference() calls used without RCU read locks
  bonding: fix potential deadlock in bond_uninit()
  net: check the length of the socket address passed to connect(2)
  stmmac: add documentation for the driver.
  stmmac: fix kconfig for crc32 build error
  be2net: fix bug in vlan rx path for big endian architecture
  be2net: fix flashing on big endian architectures
  be2net: fix a bug in flashing the redboot section
  bonding: bond_xmit_roundrobin() fix
  drivers/net: Add missing unlock
  net: gianfar - align BD ring size console messages
  net: gianfar - initialize per-queue statistics
  ...

net: check the length of the socket address passed to connect(2)

2010-04-02T00:26:01+00:00

check the length of the socket address passed to connect(2).

Check the length of the socket address passed to connect(2). If the
length is invalid, -EINVAL will be returned.

Signed-off-by: Changli Gao 
----
net/bluetooth/l2cap.c | 3 ++-
net/bluetooth/rfcomm/sock.c | 3 ++-
net/bluetooth/sco.c | 3 ++-
net/can/bcm.c | 3 +++
net/ieee802154/af_ieee802154.c | 3 +++
net/ipv4/af_inet.c | 5 +++++
net/netlink/af_netlink.c | 3 +++
7 files changed, 20 insertions(+), 3 deletions(-)
Signed-off-by: David S. Miller