linux-toradex.git/net/ipv4/af_inet.c, branch v5.3.2

ipv4: use indirect call wrappers for {tcp, udp}_{recv, send}msg()

2019-07-03T20:51:54+00:00

This avoids an indirect call per syscall for common ipv4 transports

v1 -> v2:
 - avoid unneeded reclaration for udp_sendmsg, as suggested by Willem

Signed-off-by: Paolo Abeni 
Signed-off-by: David S. Miller

inet: factor out inet_send_prepare()

2019-07-03T20:51:54+00:00

The same code is replicated verbatim in multiple places, and the next
patches will introduce an additional user for it. Factor out a
helper and use it where appropriate. No functional change intended.

Signed-off-by: Paolo Abeni 
Signed-off-by: David S. Miller

Merge tag 'spdx-5.2-rc3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2019-05-31T15:34:32+00:00

Pull yet more SPDX updates from Greg KH:
 "Here is another set of reviewed patches that adds SPDX tags to
  different kernel files, based on a set of rules that are being used to
  parse the comments to try to determine that the license of the file is
  "GPL-2.0-or-later" or "GPL-2.0-only". Only the "obvious" versions of
  these matches are included here, a number of "non-obvious" variants of
  text have been found but those have been postponed for later review
  and analysis.

  There is also a patch in here to add the proper SPDX header to a bunch
  of Kbuild files that we have missed in the past due to new files being
  added and forgetting that Kbuild uses two different file names for
  Makefiles. This issue was reported by the Kbuild maintainer.

  These patches have been out for review on the linux-spdx@vger mailing
  list, and while they were created by automatic tools, they were
  hand-verified by a bunch of different people, all whom names are on
  the patches are reviewers"

* tag 'spdx-5.2-rc3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (82 commits)
  treewide: Add SPDX license identifier - Kbuild
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 225
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 224
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 223
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 222
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 221
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 220
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 218
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 217
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 216
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 215
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 214
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 213
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 211
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 210
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 209
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 207
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 206
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 203
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201
  ...

net: don't clear sock->sk early to avoid trouble in strparser

2019-05-30T21:54:17+00:00

af_inet sets sock->sk to NULL which trips strparser over:

BUG: kernel NULL pointer dereference, address: 0000000000000012
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 7 PID: 0 Comm: swapper/7 Not tainted 5.2.0-rc1-00139-g14629453a6d3 #21
RIP: 0010:tcp_peek_len+0x10/0x60
RSP: 0018:ffffc02e41c54b98 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff9cf924c4e030 RCX: 0000000000000051
RDX: 0000000000000000 RSI: 000000000000000c RDI: ffff9cf97128f480
RBP: ffff9cf9365e0300 R08: ffff9cf94fe7d2c0 R09: 0000000000000000
R10: 000000000000036b R11: ffff9cf939735e00 R12: ffff9cf91ad9ae40
R13: ffff9cf924c4e000 R14: ffff9cf9a8fcbaae R15: 0000000000000020
FS: 0000000000000000(0000) GS:ffff9cf9af7c0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000012 CR3: 000000013920a003 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
 
 strp_data_ready+0x48/0x90
 tls_data_ready+0x22/0xd0 [tls]
 tcp_rcv_established+0x569/0x620
 tcp_v4_do_rcv+0x127/0x1e0
 tcp_v4_rcv+0xad7/0xbf0
 ip_protocol_deliver_rcu+0x2c/0x1c0
 ip_local_deliver_finish+0x41/0x50
 ip_local_deliver+0x6b/0xe0
 ? ip_protocol_deliver_rcu+0x1c0/0x1c0
 ip_rcv+0x52/0xd0
 ? ip_rcv_finish_core.isra.20+0x380/0x380
 __netif_receive_skb_one_core+0x7e/0x90
 netif_receive_skb_internal+0x42/0xf0
 napi_gro_receive+0xed/0x150
 nfp_net_poll+0x7a2/0xd30 [nfp]
 ? kmem_cache_free_bulk+0x286/0x310
 net_rx_action+0x149/0x3b0
 __do_softirq+0xe3/0x30a
 ? handle_irq_event_percpu+0x6a/0x80
 irq_exit+0xe8/0xf0
 do_IRQ+0x85/0xd0
 common_interrupt+0xf/0xf
 
RIP: 0010:cpuidle_enter_state+0xbc/0x450

To avoid this issue set sock->sk after sk_prot->close.
My grepping and testing did not discover any code which
would depend on the current behaviour.

Fixes: c46234ebb4d1 ("tls: RX path for ktls")
Reported-by: David Beckett 
Signed-off-by: Jakub Kicinski 
Reviewed-by: Dirk van der Merwe 
Signed-off-by: David S. Miller

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman

net: rework SIOCGSTAMP ioctl handling

2019-04-19T21:07:40+00:00

The SIOCGSTAMP/SIOCGSTAMPNS ioctl commands are implemented by many
socket protocol handlers, and all of those end up calling the same
sock_get_timestamp()/sock_get_timestampns() helper functions, which
results in a lot of duplicate code.

With the introduction of 64-bit time_t on 32-bit architectures, this
gets worse, as we then need four different ioctl commands in each
socket protocol implementation.

To simplify that, let's add a new .gettstamp() operation in
struct proto_ops, and move ioctl implementation into the common
sock_ioctl()/compat_sock_ioctl_trans() functions that these all go
through.

We can reuse the sock_get_timestamp() implementation, but generalize
it so it can deal with both native and compat mode, as well as
timeval and timespec structures.

Acked-by: Stefan Schmidt 
Acked-by: Neil Horman 
Acked-by: Marc Kleine-Budde 
Link: https://lore.kernel.org/lkml/CAK8P3a038aDQQotzua_QtKGhq8O9n+rdiz2=WDCp82ys8eUT+A@mail.gmail.com/
Signed-off-by: Arnd Bergmann 
Acked-by: Willem de Bruijn 
Signed-off-by: David S. Miller

net: use rcu_dereference_protected to fetch sk_dst_cache in sk_destruct

2019-04-02T01:10:51+00:00

As Eric noticed, in .sk_destruct, sk->sk_dst_cache update is prevented, and
no barrier is needed for this. So change to use rcu_dereference_protected()
instead of rcu_dereference_check() to fetch sk_dst_cache in there.

v1->v2:
  - no change, repost after net-next is open.

Reported-by: Eric Dumazet 
Signed-off-by: Xin Long 
Signed-off-by: David S. Miller

tcp: add one skb cache for rx

2019-03-24T01:57:38+00:00

Often times, recvmsg() system calls and BH handling for a particular
TCP socket are done on different cpus.

This means the incoming skb had to be allocated on a cpu,
but freed on another.

This incurs a high spinlock contention in slab layer for small rpc,
but also a high number of cache line ping pongs for larger packets.

A full size GRO packet might use 45 page fragments, meaning
that up to 45 put_page() can be involved.

More over performing the __kfree_skb() in the recvmsg() context
adds a latency for user applications, and increase probability
of trapping them in backlog processing, since the BH handler
might found the socket owned by the user.

This patch, combined with the prior one increases the rpc
performance by about 10 % on servers with large number of cores.

(tcp_rr workload with 10,000 flows and 112 threads reach 9 Mpps
 instead of 8 Mpps)

This also increases single bulk flow performance on 40Gbit+ links,
since in this case there are often two cpus working in tandem :

 - CPU handling the NIC rx interrupts, feeding the receive queue,
  and (after this patch) freeing the skbs that were consumed.

 - CPU in recvmsg() system call, essentially 100 % busy copying out
  data to user space.

Having at most one skb in a per-socket cache has very little risk
of memory exhaustion, and since it is protected by socket lock,
its management is essentially free.

Note that if rps/rfs is used, we do not enable this feature, because
there is high chance that the same cpu is handling both the recvmsg()
system call and the TCP rx path, but that another cpu did the skb
allocations in the device driver right before the RPS/RFS logic.

To properly handle this case, it seems we would need to record
on which cpu skb was allocated, and use a different channel
to give skbs back to this cpu.

Signed-off-by: Eric Dumazet 
Acked-by: Soheil Hassas Yeganeh 
Acked-by: Willem de Bruijn 
Signed-off-by: David S. Miller

gso: validate gso_type on ipip style tunnels

2019-02-20T19:24:27+00:00

Commit 121d57af308d ("gso: validate gso_type in GSO handlers") added
gso_type validation to existing gso_segment callback functions, to
filter out illegal and potentially dangerous SKB_GSO_DODGY packets.

Convert tunnels that now call inet_gso_segment and ipv6_gso_segment
directly to have their own callbacks and extend validation to these.

Signed-off-by: Willem de Bruijn 
Signed-off-by: David S. Miller

net: use indirect call wrappers at GRO transport layer

2018-12-15T21:23:02+00:00

This avoids an indirect call in the receive path for TCP and UDP
packets. TCP takes precedence on UDP, so that we have a single
additional conditional in the common case.

When IPV6 is build as module, all gro symbols except UDPv6 are
builtin, while the latter belong to the ipv6 module, so we
need some special care.

v1 -> v2:
 - adapted to INDIRECT_CALL_ changes
v2 -> v3:
 - fix build issue with CONFIG_IPV6=m

Signed-off-by: Paolo Abeni 
Signed-off-by: David S. Miller