linux-toradex.git/net/ipv4/fib_frontend.c, branch v3.4.53

Remove all #inclusions of asm/system.h

2012-03-28T17:30:03+00:00

Remove all #inclusions of asm/system.h preparatory to splitting and killing
it.  Performed with the following command:

perl -p -i -e 's!^#\s*include\s*.*\n!!' `grep -Irl '^#\s*include\s*' *`

Signed-off-by: David Howells

net: Convert printks to pr_

2012-03-12T06:42:51+00:00

Use a more current kernel messaging style.

Convert a printk block to print_hex_dump.
Coalesce formats, align arguments.
Use %s, __func__ instead of embedding function names.

Some messages that were prefixed with _close are
now prefixed with _fini.  Some ah4 and esp messages
are now not prefixed with "ip ".

The intent of this patch is to later add something like
  #define pr_fmt(fmt) "IPv4: " fmt.
to standardize the output messages.

Text size is trivially reduced. (x86-32 allyesconfig)

$ size net/ipv4/built-in.o*
   text	   data	    bss	    dec	    hex	filename
 887888	  31558	 249696	1169142	 11d6f6	net/ipv4/built-in.o.new
 887934	  31558	 249800	1169292	 11d78c	net/ipv4/built-in.o.old

Signed-off-by: Joe Perches 
Signed-off-by: David S. Miller

rtnetlink: Compute and store minimum ifinfo dump size

2011-06-10T03:38:07+00:00

The message size allocated for rtnl ifinfo dumps was limited to
a single page.  This is not enough for additional interface info
available with devices that support SR-IOV and caused a bug in
which VF info would not be displayed if more than approximately
40 VFs were created per interface.

Implement a new function pointer for the rtnl_register service that will
calculate the amount of data required for the ifinfo dump and allocate
enough data to satisfy the request.

Signed-off-by: Greg Rose 
Signed-off-by: Jeff Kirsher

Disable rp_filter for IPsec packets

2011-04-11T01:50:59+00:00

The reverse path filter interferes with IPsec subnet-to-subnet tunnels,
especially when the link to the IPsec peer is on an interface other than
the one hosting the default route.

With dynamic routing, where the peer might be reachable through eth0
today and eth1 tomorrow, it's difficult to keep rp_filter enabled unless
fake routes to the remote subnets are configured on the interface
currently used to reach the peer.

IPsec provides a much stronger anti-spoofing policy than rp_filter, so
this patch disables the rp_filter for packets with a security path.

Signed-off-by: Michael Smith 
Signed-off-by: David S. Miller

fib_validate_source(): pass sk_buff instead of mark

2011-04-11T01:50:59+00:00

This makes sk_buff available for other use in fib_validate_source().

Signed-off-by: Michael Smith 
Signed-off-by: David S. Miller

fib: add rtnl locking in ip_fib_net_exit

2011-03-30T23:57:46+00:00

Daniel J Blueman reported a lockdep splat in trie_firstleaf(), caused by
RTNL being not locked before a call to fib_table_flush()

Reported-by: Daniel J Blueman 
Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller

ipv4: Invalidate nexthop cache nh_saddr more correctly.

2011-03-25T00:42:21+00:00

Any operation that:

1) Brings up an interface
2) Adds an IP address to an interface
3) Deletes an IP address from an interface

can potentially invalidate the nh_saddr value, requiring
it to be recomputed.

Perform the recomputation lazily using a generation ID.

Reported-by: Julian Anastasov 
Signed-off-by: David S. Miller

ipv4: fix route deletion for IPs on many subnets

2011-03-22T08:06:32+00:00

Alex Sidorenko reported for problems with local
routes left after IP addresses are deleted. It happens
when same IPs are used in more than one subnet for the
device.

	Fix fib_del_ifaddr to restrict the checks for duplicate
local and broadcast addresses only to the IFAs that use
our primary IFA or another primary IFA with same address.
And we expect the prefsrc to be matched when the routes
are deleted because it is possible they to differ only by
prefsrc. This patch prevents local and broadcast routes
to be leaked until their primary IP is deleted finally
from the box.

	As the secondary address promotion needs to delete
the routes for all secondaries that used the old primary IFA,
add option to ignore these secondaries from the checks and
to assume they are already deleted, so that we can safely
delete the route while these IFAs are still on the device list.

Reported-by: Alex Sidorenko 
Signed-off-by: Julian Anastasov 
Signed-off-by: David S. Miller

ipv4: Use flowi4 in FIB layer.

2011-03-12T23:08:49+00:00

Signed-off-by: David S. Miller

ipv4: Pass ipv4 flow objects into fib_lookup() paths.

2011-03-12T23:08:47+00:00

To start doing these conversions, we need to add some temporary
flow4_* macros which will eventually go away when all the protocol
code paths are changed to work on AF specific flowi objects.

Signed-off-by: David S. Miller