linux-toradex.git/net/ipv4/igmp.c, branch v3.18.12

ipv6: mld: fix add_grhead skb_over_panic for devs with large MTUs

2014-11-16T21:55:06+00:00

It has been reported that generating an MLD listener report on
devices with large MTUs (e.g. 9000) and a high number of IPv6
addresses can trigger a skb_over_panic():

skbuff: skb_over_panic: text:ffffffff80612a5d len:3776 put:20
head:ffff88046d751000 data:ffff88046d751010 tail:0xed0 end:0xec0
dev:port1
 ------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:100!
invalid opcode: 0000 [#1] SMP
Modules linked in: ixgbe(O)
CPU: 3 PID: 0 Comm: swapper/3 Tainted: G O 3.14.23+ #4
[...]
Call Trace:
 
 [] ? skb_put+0x3a/0x3b
 [] ? add_grhead+0x45/0x8e
 [] ? add_grec+0x394/0x3d4
 [] ? mld_ifc_timer_expire+0x195/0x20d
 [] ? mld_dad_timer_expire+0x45/0x45
 [] ? call_timer_fn.isra.29+0x12/0x68
 [] ? run_timer_softirq+0x163/0x182
 [] ? __do_softirq+0xe0/0x21d
 [] ? irq_exit+0x4e/0xd3
 [] ? smp_apic_timer_interrupt+0x3b/0x46
 [] ? apic_timer_interrupt+0x6a/0x70

mld_newpack() skb allocations are usually requested with dev->mtu
in size, since commit 72e09ad107e7 ("ipv6: avoid high order allocations")
we have changed the limit in order to be less likely to fail.

However, in MLD/IGMP code, we have some rather ugly AVAILABLE(skb)
macros, which determine if we may end up doing an skb_put() for
adding another record. To avoid possible fragmentation, we check
the skb's tailroom as skb->dev->mtu - skb->len, which is a wrong
assumption as the actual max allocation size can be much smaller.

The IGMP case doesn't have this issue as commit 57e1ab6eaddc
("igmp: refine skb allocations") stores the allocation size in
the cb[].

Set a reserved_tailroom to make it fit into the MTU and use
skb_availroom() helper instead. This also allows to get rid of
igmp_skb_size().

Reported-by: Wei Liu 
Fixes: 72e09ad107e7 ("ipv6: avoid high order allocations")
Signed-off-by: Daniel Borkmann 
Cc: Eric Dumazet 
Cc: Hannes Frederic Sowa 
Cc: David L Stevens 
Acked-by: Eric Dumazet 
Acked-by: Hannes Frederic Sowa 
Signed-off-by: David S. Miller

ipv4: igmp: fix v3 general query drop monitor false positive

2014-10-06T21:14:54+00:00

In case we find a general query with non-zero number of sources, we
are dropping the skb as it's malformed.

RFC3376, section 4.1.8. Number of Sources (N):

  This number is zero in a General Query or a Group-Specific Query,
  and non-zero in a Group-and-Source-Specific Query.

Therefore, reflect that by using kfree_skb() instead of consume_skb().

Fixes: d679c5324d9a ("igmp: avoid drop_monitor false positives")
Signed-off-by: Daniel Borkmann 
Acked-by: Eric Dumazet 
Signed-off-by: David S. Miller

ipv4: implement igmp_qrv sysctl to tune igmp robustness variable

2014-09-05T05:26:14+00:00

As in IPv6 people might increase the igmp query robustness variable to
make sure unsolicited state change reports aren't lost on the network. Add
and document this new knob to igmp code.

RFCs allow tuning this parameter back to first IGMP RFC, so we also use
this setting for all counters, including source specific multicast.

Also take over sysctl value when upping the interface and don't reuse
the last one seen on the interface.

Cc: Flavio Leitner 
Signed-off-by: Hannes Frederic Sowa 
Acked-by: Flavio Leitner 
Signed-off-by: David S. Miller

net/ipv4/igmp.c: Replace rcu_dereference() with rcu_access_pointer()

2014-08-22T19:23:10+00:00

The "rcu_dereference()" call is used directly in a condition.
Since its return value is never dereferenced it is recommended to use
"rcu_access_pointer()" instead of "rcu_dereference()".
Therefore, this patch makes the replacement.

The following Coccinelle semantic patch was used:
@@
@@

(
 if(
 (<+...
- rcu_dereference
+ rcu_access_pointer
  (...)
  ...+>)) {...}
|
 while(
 (<+...
- rcu_dereference
+ rcu_access_pointer
  (...)
  ...+>)) {...}
)

Signed-off-by: Andreea-Cristina Bernat 
Signed-off-by: David S. Miller

igmp: remove exceptional & on function name

2014-07-25T06:23:31+00:00

In this file, function names are otherwise used as pointers without &.

A simplified version of the Coccinelle semantic patch that makes this
change is as follows:

// 
@r@
identifier f;
@@

f(...) { ... }

@@
identifier r.f;
@@

- &f
+ f
// 

Signed-off-by: Himangi Saraogi 
Acked-by: Julia Lawall 
Signed-off-by: David S. Miller

igmp: fix the problem when mc leave group

2014-07-08T04:30:55+00:00

The problem was triggered by these steps:

1) create socket, bind and then setsockopt for add mc group.
   mreq.imr_multiaddr.s_addr = inet_addr("255.0.0.37");
   mreq.imr_interface.s_addr = inet_addr("192.168.1.2");
   setsockopt(sockfd, IPPROTO_IP, IP_ADD_MEMBERSHIP, &mreq, sizeof(mreq));

2) drop the mc group for this socket.
   mreq.imr_multiaddr.s_addr = inet_addr("255.0.0.37");
   mreq.imr_interface.s_addr = inet_addr("0.0.0.0");
   setsockopt(sockfd, IPPROTO_IP, IP_DROP_MEMBERSHIP, &mreq, sizeof(mreq));

3) and then drop the socket, I found the mc group was still used by the dev:

   netstat -g

   Interface       RefCnt Group
   --------------- ------ ---------------------
   eth2		   1	  255.0.0.37

Normally even though the IP_DROP_MEMBERSHIP return error, the mc group still need
to be released for the netdev when drop the socket, but this process was broken when
route default is NULL, the reason is that:

The ip_mc_leave_group() will choose the in_dev by the imr_interface.s_addr, if input addr
is NULL, the default route dev will be chosen, then the ifindex is got from the dev,
then polling the inet->mc_list and return -ENODEV, but if the default route dev is NULL,
the in_dev and ifIndex is both NULL, when polling the inet->mc_list, the mc group will be
released from the mc_list, but the dev didn't dec the refcnt for this mc group, so
when dropping the socket, the mc_list is NULL and the dev still keep this group.

v1->v2: According Hideaki's suggestion, we should align with IPv6 (RFC3493) and BSDs,
	so I add the checking for the in_dev before polling the mc_list, make sure when
	we remove the mc group, dec the refcnt to the real dev which was using the mc address.
	The problem would never happened again.

Signed-off-by: Ding Tianhong 
Signed-off-by: David S. Miller

inetpeer: get rid of ip_id_count

2014-06-02T18:00:41+00:00

Ideally, we would need to generate IP ID using a per destination IP
generator.

linux kernels used inet_peer cache for this purpose, but this had a huge
cost on servers disabling MTU discovery.

1) each inet_peer struct consumes 192 bytes

2) inetpeer cache uses a binary tree of inet_peer structs,
   with a nominal size of ~66000 elements under load.

3) lookups in this tree are hitting a lot of cache lines, as tree depth
   is about 20.

4) If server deals with many tcp flows, we have a high probability of
   not finding the inet_peer, allocating a fresh one, inserting it in
   the tree with same initial ip_id_count, (cf secure_ip_id())

5) We garbage collect inet_peer aggressively.

IP ID generation do not have to be 'perfect'

Goal is trying to avoid duplicates in a short period of time,
so that reassembly units have a chance to complete reassembly of
fragments belonging to one message before receiving other fragments
with a recycled ID.

We simply use an array of generators, and a Jenkin hash using the dst IP
as a key.

ipv6_select_ident() is put back into net/ipv6/ip6_output.c where it
belongs (it is only used from this file)

secure_ip_id() and secure_ipv6_id() no longer are needed.

Rename ip_select_ident_more() to ip_select_ident_segs() to avoid
unnecessary decrement/increment of the number of segments.

Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller

igmp: Call skb_checksum_simple_validate

2014-05-09T03:47:50+00:00

Use skb_checksum_simple_validate to verify checksum.

Signed-off-by: Tom Herbert 
Signed-off-by: David S. Miller

net: replace macros net_random and net_srandom with direct calls to prandom

2014-01-14T23:15:25+00:00

This patch removes the net_random and net_srandom macros and replaces
them with direct calls to the prandom ones. As new commits only seem to
use prandom_u32 there is no use to keep them around.
This change makes it easier to grep for users of prandom_u32.

Signed-off-by: Aruna-Hewapathirane 
Suggested-by: Hannes Frederic Sowa 
Acked-by: Hannes Frederic Sowa 
Signed-off-by: David S. Miller

ipv4: register igmp_notifier even when !CONFIG_PROC_FS

2014-01-14T23:03:33+00:00

We still need this notifier even when we don't config
PROC_FS.

It should be rare to have a kernel without PROC_FS,
so just for completeness.

Cc: Stephen Hemminger 
Cc: David S. Miller 
Cc: Patrick McHardy 
Signed-off-by: Cong Wang 
Signed-off-by: David S. Miller