linux-toradex.git/net/ipv4/ipip.c, branch v3.4.100 Linux kernel for Apalis and Colibri modules net: tunnels - enable module autoloading 2014-06-26T19:10:28+00:00 Tom Gundersen teg@jklm.no 2014-05-15T21:21:30+00:00 d0e49724c557974bb109ffee5cd3eb4864b8cc1d [ Upstream commit f98f89a0104454f35a62d681683c844f6dbf4043 ] Enable the module alias hookup to allow tunnel modules to be autoloaded on demand. This is in line with how most other netdev kinds work, and will allow userspace to create tunnels without having CAP_SYS_MODULE. Signed-off-by: Tom Gundersen <teg@jklm.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit f98f89a0104454f35a62d681683c844f6dbf4043 ]

Enable the module alias hookup to allow tunnel modules to be autoloaded on demand.

This is in line with how most other netdev kinds work, and will allow userspace
to create tunnels without having CAP_SYS_MODULE.

Signed-off-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ip_tunnel: fix kernel panic with icmp_dest_unreach 2013-06-27T18:27:32+00:00 Eric Dumazet edumazet@google.com 2013-05-24T05:49:58+00:00 3c353df4ca0f8f6912e103ca6d8d593ff4563b68 [ Upstream commit a622260254ee481747cceaaa8609985b29a31565 ] Daniel Petre reported crashes in icmp_dst_unreach() with following call graph: Daniel found a similar problem mentioned in http://lkml.indiana.edu/hypermail/linux/kernel/1007.0/00961.html And indeed this is the root cause : skb->cb[] contains data fooling IP stack. We must clear IPCB in ip_tunnel_xmit() sooner in case dst_link_failure() is called. Or else skb->cb[] might contain garbage from GSO segmentation layer. A similar fix was tested on linux-3.9, but gre code was refactored in linux-3.10. I'll send patches for stable kernels as well. Many thanks to Daniel for providing reports, patches and testing ! Reported-by: Daniel Petre <daniel.petre@rcs-rds.ro> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit a622260254ee481747cceaaa8609985b29a31565 ]

Daniel Petre reported crashes in icmp_dst_unreach() with following call
graph:

Daniel found a similar problem mentioned in
 http://lkml.indiana.edu/hypermail/linux/kernel/1007.0/00961.html

And indeed this is the root cause : skb->cb[] contains data fooling IP
stack.

We must clear IPCB in ip_tunnel_xmit() sooner in case dst_link_failure()
is called. Or else skb->cb[] might contain garbage from GSO segmentation
layer.

A similar fix was tested on linux-3.9, but gre code was refactored in
linux-3.10. I'll send patches for stable kernels as well.

Many thanks to Daniel for providing reports, patches and testing !

Reported-by: Daniel Petre <daniel.petre@rcs-rds.ro>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
net: Convert printks to pr_<level> 2012-03-12T06:42:51+00:00 Joe Perches joe@perches.com 2012-03-11T18:36:11+00:00 058bd4d2a4ff0aaa4a5381c67e776729d840c785 Use a more current kernel messaging style. Convert a printk block to print_hex_dump. Coalesce formats, align arguments. Use %s, __func__ instead of embedding function names. Some messages that were prefixed with <foo>_close are now prefixed with <foo>_fini. Some ah4 and esp messages are now not prefixed with "ip ". The intent of this patch is to later add something like #define pr_fmt(fmt) "IPv4: " fmt. to standardize the output messages. Text size is trivially reduced. (x86-32 allyesconfig) $ size net/ipv4/built-in.o* text data bss dec hex filename 887888 31558 249696 1169142 11d6f6 net/ipv4/built-in.o.new 887934 31558 249800 1169292 11d78c net/ipv4/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Use a more current kernel messaging style.

Convert a printk block to print_hex_dump.
Coalesce formats, align arguments.
Use %s, __func__ instead of embedding function names.

Some messages that were prefixed with <foo>_close are
now prefixed with <foo>_fini.  Some ah4 and esp messages
are now not prefixed with "ip ".

The intent of this patch is to later add something like
  #define pr_fmt(fmt) "IPv4: " fmt.
to standardize the output messages.

Text size is trivially reduced. (x86-32 allyesconfig)

$ size net/ipv4/built-in.o*
   text	   data	    bss	    dec	    hex	filename
 887888	  31558	 249696	1169142	 11d6f6	net/ipv4/built-in.o.new
 887934	  31558	 249800	1169292	 11d78c	net/ipv4/built-in.o.old

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ipip: Fix bug added to ipip_tunnel_xmit(). 2012-01-24T23:18:05+00:00 David S. Miller davem@davemloft.net 2012-01-24T23:18:05+00:00 658c8d964eb3cdb7e4230a59ba09c75a3359ee4a We can remove the rt_gateway == 0 check but we shouldn't remove the 'dst' initialization too. Noticed by Eric Dumazet. Signed-off-by: David S. Miller <davem@davemloft.net> 
We can remove the rt_gateway == 0 check but we shouldn't
remove the 'dst' initialization too.

Noticed by Eric Dumazet.

Signed-off-by: David S. Miller <davem@davemloft.net>
ipv4: Remove bogus checks of rt_gateway being zero. 2012-01-24T23:08:46+00:00 David S. Miller davem@davemloft.net 2012-01-12T00:46:32+00:00 496053f488fc2d859e41574f3421993826d2d0eb It can never actually happen. rt_gateway is either the fully resolved flow lookup key's destination address, or the non-zero FIB entry gateway address. Signed-off-by: David S. Miller <davem@davemloft.net> 
It can never actually happen.  rt_gateway is either the fully resolved
flow lookup key's destination address, or the non-zero FIB entry gateway
address.

Signed-off-by: David S. Miller <davem@davemloft.net>
net: reintroduce missing rcu_assign_pointer() calls 2012-01-12T20:26:56+00:00 Eric Dumazet eric.dumazet@gmail.com 2012-01-12T04:41:32+00:00 cf778b00e96df6d64f8e21b8395d1f8a859ecdc7 commit a9b3cd7f32 (rcu: convert uses of rcu_assign_pointer(x, NULL) to RCU_INIT_POINTER) did a lot of incorrect changes, since it did a complete conversion of rcu_assign_pointer(x, y) to RCU_INIT_POINTER(x, y). We miss needed barriers, even on x86, when y is not NULL. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Stephen Hemminger <shemminger@vyatta.com> CC: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
commit a9b3cd7f32 (rcu: convert uses of rcu_assign_pointer(x, NULL) to
RCU_INIT_POINTER) did a lot of incorrect changes, since it did a
complete conversion of rcu_assign_pointer(x, y) to RCU_INIT_POINTER(x,
y).

We miss needed barriers, even on x86, when y is not NULL.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Stephen Hemminger <shemminger@vyatta.com>
CC: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2011-12-16T07:11:14+00:00 David S. Miller davem@davemloft.net 2011-12-16T07:11:14+00:00 b26e478f8fd5b575684f021b05a5c6236ebb911a Conflicts: drivers/net/ethernet/freescale/fsl_pq_mdio.c net/batman-adv/translation-table.c net/ipv6/route.c 
Conflicts:
	drivers/net/ethernet/freescale/fsl_pq_mdio.c
	net/batman-adv/translation-table.c
	net/ipv6/route.c
ipip, sit: copy parms.name after register_netdevice 2011-12-12T23:50:51+00:00 Ted Feng artisdom@gmail.com 2011-12-08T00:46:21+00:00 72b36015ba43a3cca5303f5534d2c3e1899eae29 Same fix as 731abb9cb2 for ipip and sit tunnel. Commit 1c5cae815d removed an explicit call to dev_alloc_name in ipip_tunnel_locate and ipip6_tunnel_locate, because register_netdevice will now create a valid name, however the tunnel keeps a copy of the name in the private parms structure. Fix this by copying the name back after register_netdevice has successfully returned. This shows up if you do a simple tunnel add, followed by a tunnel show: $ sudo ip tunnel add mode ipip remote 10.2.20.211 $ ip tunnel tunl0: ip/ip remote any local any ttl inherit nopmtudisc tunl%d: ip/ip remote 10.2.20.211 local any ttl inherit $ sudo ip tunnel add mode sit remote 10.2.20.212 $ ip tunnel sit0: ipv6/ip remote any local any ttl 64 nopmtudisc 6rd-prefix 2002::/16 sit%d: ioctl 89f8 failed: No such device sit%d: ipv6/ip remote 10.2.20.212 local any ttl inherit Cc: stable@vger.kernel.org Signed-off-by: Ted Feng <artisdom@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Same fix as 731abb9cb2 for ipip and sit tunnel.
Commit 1c5cae815d removed an explicit call to dev_alloc_name in
ipip_tunnel_locate and ipip6_tunnel_locate, because register_netdevice
will now create a valid name, however the tunnel keeps a copy of the
name in the private parms structure. Fix this by copying the name back
after register_netdevice has successfully returned.

This shows up if you do a simple tunnel add, followed by a tunnel show:

$ sudo ip tunnel add mode ipip remote 10.2.20.211
$ ip tunnel
tunl0: ip/ip  remote any  local any  ttl inherit  nopmtudisc
tunl%d: ip/ip  remote 10.2.20.211  local any  ttl inherit
$ sudo ip tunnel add mode sit remote 10.2.20.212
$ ip tunnel
sit0: ipv6/ip  remote any  local any  ttl 64  nopmtudisc 6rd-prefix 2002::/16
sit%d: ioctl 89f8 failed: No such device
sit%d: ipv6/ip  remote 10.2.20.212  local any  ttl inherit

Cc: stable@vger.kernel.org
Signed-off-by: Ted Feng <artisdom@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: better pcpu data alignment 2011-11-08T20:10:59+00:00 Eric Dumazet eric.dumazet@gmail.com 2011-11-04T23:19:28+00:00 8ce120f11898c921329a5f618d01dcc1e8e69cac Tunnels can force an alignment of their percpu data to reduce number of cache lines used in fast path, or read in .ndo_get_stats() percpu_alloc() is a very fine grained allocator, so any small hole will be used anyway. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Tunnels can force an alignment of their percpu data to reduce number of
cache lines used in fast path, or read in .ndo_get_stats()

percpu_alloc() is a very fine grained allocator, so any small hole will
be used anyway.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rcu: convert uses of rcu_assign_pointer(x, NULL) to RCU_INIT_POINTER 2011-08-02T11:29:23+00:00 Stephen Hemminger shemminger@vyatta.com 2011-08-01T16:19:00+00:00 a9b3cd7f323b2e57593e7215362a7b02fc933e3a When assigning a NULL value to an RCU protected pointer, no barrier is needed. The rcu_assign_pointer, used to handle that but will soon change to not handle the special case. Convert all rcu_assign_pointer of NULL value. //smpl @@ expression P; @@ - rcu_assign_pointer(P, NULL) + RCU_INIT_POINTER(P, NULL) // </smpl> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
When assigning a NULL value to an RCU protected pointer, no barrier
is needed. The rcu_assign_pointer, used to handle that but will soon
change to not handle the special case.

Convert all rcu_assign_pointer of NULL value.

//smpl
@@ expression P; @@

- rcu_assign_pointer(P, NULL)
+ RCU_INIT_POINTER(P, NULL)

// </smpl>

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>