linux-toradex.git/net/ipv4, branch v3.2.15

tcp: fix syncookie regression

2012-03-23T18:21:22+00:00

[ Upstream commit dfd25ffffc132c00070eed64200e8950da5d7e9d ]

commit ea4fc0d619 (ipv4: Don't use rt->rt_{src,dst} in ip_queue_xmit())
added a serious regression on synflood handling.

Simon Kirby discovered a successful connection was delayed by 20 seconds
before being responsive.

In my tests, I discovered that xmit frames were lost, and needed ~4
retransmits and a socket dst rebuild before being really sent.

In case of syncookie initiated connection, we use a different path to
initialize the socket dst, and inet->cork.fl.u.ip4 is left cleared.

As ip_queue_xmit() now depends on inet flow being setup, fix this by
copying the temp flowi4 we use in cookie_v4_check().

Reported-by: Simon Kirby 
Bisected-by: Simon Kirby 
Signed-off-by: Eric Dumazet 
Tested-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tcp: fix tcp_shift_skb_data() to not shift SACKed data below snd_una

2012-03-19T16:02:33+00:00

[ Upstream commit 4648dc97af9d496218a05353b0e442b3dfa6aaab ]

This commit fixes tcp_shift_skb_data() so that it does not shift
SACKed data below snd_una.

This fixes an issue whose symptoms exactly match reports showing
tp->sacked_out going negative since 3.3.0-rc4 (see "WARNING: at
net/ipv4/tcp_input.c:3418" thread on netdev).

Since 2008 (832d11c5cd076abc0aa1eaf7be96c81d1a59ce41)
tcp_shift_skb_data() had been shifting SACKed ranges that were below
snd_una. It checked that the *end* of the skb it was about to shift
from was above snd_una, but did not check that the end of the actual
shifted range was above snd_una; this commit adds that check.

Shifting SACKed ranges below snd_una is problematic because for such
ranges tcp_sacktag_one() short-circuits: it does not declare anything
as SACKed and does not increase sacked_out.

Before the fixes in commits cc9a672ee522d4805495b98680f4a3db5d0a0af9
and daef52bab1fd26e24e8e9578f8fb33ba1d0cb412, shifting SACKed ranges
below snd_una happened to work because tcp_shifted_skb() was always
(incorrectly) passing in to tcp_sacktag_one() an skb whose end_seq
tcp_shift_skb_data() had already guaranteed was beyond snd_una. Hence
tcp_sacktag_one() never short-circuited and always increased
tp->sacked_out in this case.

After those two fixes, my testing has verified that shifting SACKed
ranges below snd_una could cause tp->sacked_out to go negative with
the following sequence of events:

(1) tcp_shift_skb_data() sees an skb whose end_seq is beyond snd_una,
    then shifts a prefix of that skb that is below snd_una

(2) tcp_shifted_skb() increments the packet count of the
    already-SACKed prev sk_buff

(3) tcp_sacktag_one() sees the end of the new SACKed range is below
    snd_una, so it short-circuits and doesn't increase tp->sacked_out

(5) tcp_clean_rtx_queue() sees the SACKed skb has been ACKed,
    decrements tp->sacked_out by this "inflated" pcount that was
    missing a matching increase in tp->sacked_out, and hence
    tp->sacked_out underflows to a u32 like 0xFFFFFFFF, which casted
    to s32 is negative.

(6) this leads to the warnings seen in the recent "WARNING: at
    net/ipv4/tcp_input.c:3418" thread on the netdev list; e.g.:
    tcp_input.c:3418  WARN_ON((int)tp->sacked_out < 0);

More generally, I think this bug can be tickled in some cases where
two or more ACKs from the receiver are lost and then a DSACK arrives
that is immediately above an existing SACKed skb in the write queue.

This fix changes tcp_shift_skb_data() to abort this sequence at step
(1) in the scenario above by noticing that the bytes are below snd_una
and not shifting them.

Signed-off-by: Neal Cardwell 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tcp: don't fragment SACKed skbs in tcp_mark_head_lost()

2012-03-19T16:02:33+00:00

[ Upstream commit c0638c247f559e1a16ee79e54df14bca2cb679ea ]

In tcp_mark_head_lost() we should not attempt to fragment a SACKed skb
to mark the first portion as lost. This is for two primary reasons:

(1) tcp_shifted_skb() coalesces adjacent regions of SACKed skbs. When
doing this, it preserves the sum of their packet counts in order to
reflect the real-world dynamics on the wire. But given that skbs can
have remainders that do not align to MSS boundaries, this packet count
preservation means that for SACKed skbs there is not necessarily a
direct linear relationship between tcp_skb_pcount(skb) and
skb->len. Thus tcp_mark_head_lost()'s previous attempts to fragment
off and mark as lost a prefix of length (packets - oldcnt)*mss from
SACKed skbs were leading to occasional failures of the WARN_ON(len >
skb->len) in tcp_fragment() (which used to be a BUG_ON(); see the
recent "crash in tcp_fragment" thread on netdev).

(2) there is no real point in fragmenting off part of a SACKed skb and
calling tcp_skb_mark_lost() on it, since tcp_skb_mark_lost() is a NOP
for SACKed skbs.

Signed-off-by: Neal Cardwell 
Acked-by: Ilpo Järvinen 
Acked-by: Yuchung Cheng 
Acked-by: Nandita Dukkipati 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tcp: fix false reordering signal in tcp_shifted_skb

2012-03-19T16:02:22+00:00

[ Upstream commit 4c90d3b30334833450ccbb02f452d4972a3c3c3f ]

When tcp_shifted_skb() shifts bytes from the skb that is currently
pointed to by 'highest_sack' then the increment of
TCP_SKB_CB(skb)->seq implicitly advances tcp_highest_sack_seq(). This
implicit advancement, combined with the recent fix to pass the correct
SACKed range into tcp_sacktag_one(), caused tcp_sacktag_one() to think
that the newly SACKed range was before the tcp_highest_sack_seq(),
leading to a call to tcp_update_reordering() with a degree of
reordering matching the size of the newly SACKed range (typically just
1 packet, which is a NOP, but potentially larger).

This commit fixes this by simply calling tcp_sacktag_one() before the
TCP_SKB_CB(skb)->seq advancement that can advance our notion of the
highest SACKed sequence.

Correspondingly, we can simplify the code a little now that
tcp_shifted_skb() should update the lost_cnt_hint in all cases where
skb == tp->lost_skb_hint.

Signed-off-by: Neal Cardwell 
Acked-by: Yuchung Cheng 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipsec: be careful of non existing mac headers

2012-03-19T16:02:21+00:00

[ Upstream commit 03606895cd98c0a628b17324fd7b5ff15db7e3cd ]

Niccolo Belli reported ipsec crashes in case we handle a frame without
mac header (atm in his case)

Before copying mac header, better make sure it is present.

Bugzilla reference:  https://bugzilla.kernel.org/show_bug.cgi?id=42809

Reported-by: Niccolò Belli 
Tested-by: Niccolò Belli 
Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tcp: fix tcp_shifted_skb() adjustment of lost_cnt_hint for FACK

2012-03-01T00:31:05+00:00

[ Upstream commit 0af2a0d0576205dda778d25c6c344fc6508fc81d ]

This commit ensures that lost_cnt_hint is correctly updated in
tcp_shifted_skb() for FACK TCP senders. The lost_cnt_hint adjustment
in tcp_sacktag_one() only applies to non-FACK senders, so FACK senders
need their own adjustment.

This applies the spirit of 1e5289e121372a3494402b1b131b41bfe1cf9b7f -
except now that the sequence range passed into tcp_sacktag_one() is
correct we need only have a special case adjustment for FACK.

Signed-off-by: Neal Cardwell 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tcp: fix range tcp_shifted_skb() passes to tcp_sacktag_one()

2012-03-01T00:31:04+00:00

[ Upstream commit daef52bab1fd26e24e8e9578f8fb33ba1d0cb412 ]

Fix the newly-SACKed range to be the range of newly-shifted bytes.

Previously - since 832d11c5cd076abc0aa1eaf7be96c81d1a59ce41 -
tcp_shifted_skb() incorrectly called tcp_sacktag_one() with the start
and end sequence numbers of the skb it passes in set to the range just
beyond the range that is newly-SACKed.

This commit also removes a special-case adjustment to lost_cnt_hint in
tcp_shifted_skb() since the pre-existing adjustment of lost_cnt_hint
in tcp_sacktag_one() now properly handles this things now that the
correct start sequence number is passed in.

Signed-off-by: Neal Cardwell 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tcp: allow tcp_sacktag_one() to tag ranges not aligned with skbs

2012-03-01T00:31:04+00:00

[ Upstream commit cc9a672ee522d4805495b98680f4a3db5d0a0af9 ]

This commit allows callers of tcp_sacktag_one() to pass in sequence
ranges that do not align with skb boundaries, as tcp_shifted_skb()
needs to do in an upcoming fix in this patch series.

In fact, now tcp_sacktag_one() does not need to depend on an input skb
at all, which makes its semantics and dependencies more clear.

Signed-off-by: Neal Cardwell 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv4: Fix wrong order of ip_rt_get_source() and update iph->daddr.

2012-03-01T00:31:02+00:00

[ Upstream commit 5dc7883f2a7c25f8df40d7479687153558cd531b ]

This patch fix a bug which introduced by commit ac8a4810 (ipv4: Save
nexthop address of LSRR/SSRR option to IPCB.).In that patch, we saved
the nexthop of SRR in ip_option->nexthop and update iph->daddr until
we get to ip_forward_options(), but we need to update it before
ip_rt_get_source(), otherwise we may get a wrong src.

Signed-off-by: Li Wei 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tcp_v4_send_reset: binding oif to iif in no sock case

2012-03-01T00:31:01+00:00

[ Upstream commit e2446eaab5585555a38ea0df4e01ff313dbb4ac9 ]

Binding RST packet outgoing interface to incoming interface
for tcp v4 when there is no socket associate with it.
when sk is not NULL, using sk->sk_bound_dev_if instead.
(suggested by Eric Dumazet).

This has few benefits:
1. tcp_v6_send_reset already did that.
2. This helps tcp connect with SO_BINDTODEVICE set. When
connection is lost, we still able to sending out RST using
same interface.
3. we are sending reply, it is most likely to be succeed
if iif is used

Signed-off-by: Shawn Lu 
Acked-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman