linux-toradex.git/net/ipv4, branch v3.5.7 Linux kernel for Apalis and Colibri modules ipv4: raw: fix icmp_filter() 2012-10-12T20:47:04+00:00 Eric Dumazet edumazet@google.com 2012-09-22T00:08:29+00:00 9e3e8f791b0f6f802a86f1da9487f7aa6f369a1c [ Upstream commit ab43ed8b7490cb387782423ecf74aeee7237e591 ] icmp_filter() should not modify its input, or else its caller would need to recompute ip_hdr() if skb->head is reallocated. Use skb_header_pointer() instead of pskb_may_pull() and change the prototype to make clear both sk and skb are const. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit ab43ed8b7490cb387782423ecf74aeee7237e591 ]

icmp_filter() should not modify its input, or else its caller
would need to recompute ip_hdr() if skb->head is reallocated.

Use skb_header_pointer() instead of pskb_may_pull() and
change the prototype to make clear both sk and skb are const.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tcp: flush DMA queue before sk_wait_data if rcv_wnd is zero 2012-10-12T20:47:02+00:00 Michal Kubeček mkubecek@suse.cz 2012-09-14T04:59:52+00:00 c4edecfd4f8ab61bcbeb18954910a4b5c93a95c2 [ Upstream commit 15c041759bfcd9ab0a4e43f1c16e2644977d0467 ] If recv() syscall is called for a TCP socket so that - IOAT DMA is used - MSG_WAITALL flag is used - requested length is bigger than sk_rcvbuf - enough data has already arrived to bring rcv_wnd to zero then when tcp_recvmsg() gets to calling sk_wait_data(), receive window can be still zero while sk_async_wait_queue exhausts enough space to keep it zero. As this queue isn't cleaned until the tcp_service_net_dma() call, sk_wait_data() cannot receive any data and blocks forever. If zero receive window and non-empty sk_async_wait_queue is detected before calling sk_wait_data(), process the queue first. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 15c041759bfcd9ab0a4e43f1c16e2644977d0467 ]

If recv() syscall is called for a TCP socket so that
  - IOAT DMA is used
  - MSG_WAITALL flag is used
  - requested length is bigger than sk_rcvbuf
  - enough data has already arrived to bring rcv_wnd to zero
then when tcp_recvmsg() gets to calling sk_wait_data(), receive
window can be still zero while sk_async_wait_queue exhausts
enough space to keep it zero. As this queue isn't cleaned until
the tcp_service_net_dma() call, sk_wait_data() cannot receive
any data and blocks forever.

If zero receive window and non-empty sk_async_wait_queue is
detected before calling sk_wait_data(), process the queue first.

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tcp: fix regression in urgent data handling 2012-10-12T20:46:57+00:00 Eric Dumazet edumazet@google.com 2012-09-17T12:51:39+00:00 3ccda9bc19a76edeea574127be4478648426f3d2 [ Upstream commit 1d57f19539c074105791da6384a8ad674bba8037 ] Stephan Springl found that commit 1402d366019fed "tcp: introduce tcp_try_coalesce" introduced a regression for rlogin It turns out problem comes from TCP urgent data handling and a change in behavior in input path. rlogin sends two one-byte packets with URG ptr set, and when next data frame is coalesced, we lack sk_data_ready() calls to wakeup consumer. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Stephan Springl <springl-k@lar.bfw.de> Cc: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 1d57f19539c074105791da6384a8ad674bba8037 ]

Stephan Springl found that commit 1402d366019fed "tcp: introduce
tcp_try_coalesce" introduced a regression for rlogin

It turns out problem comes from TCP urgent data handling and
a change in behavior in input path.

rlogin sends two one-byte packets with URG ptr set, and when next data
frame is coalesced, we lack sk_data_ready() calls to wakeup consumer.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Stephan Springl <springl-k@lar.bfw.de>
Cc: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
net: ipv4: ipmr_expire_timer causes crash when removing net namespace 2012-10-02T17:38:56+00:00 Francesco Ruggeri fruggeri@aristanetworks.com 2012-08-24T07:38:35+00:00 d7648ad12f80e2790b7479945538fd8850e76eae [ Upstream commit acbb219d5f53821b2d0080d047800410c0420ea1 ] When tearing down a net namespace, ipv4 mr_table structures are freed without first deactivating their timers. This can result in a crash in run_timer_softirq. This patch mimics the corresponding behaviour in ipv6. Locking and synchronization seem to be adequate. We are about to kfree mrt, so existing code should already make sure that no other references to mrt are pending or can be created by incoming traffic. The functions invoked here do not cause new references to mrt or other race conditions to be created. Invoking del_timer_sync guarantees that ipmr_expire_timer is inactive. Both ipmr_expire_process (whose completion we may have to wait in del_timer_sync) and mroute_clean_tables internally use mfc_unres_lock or other synchronizations when needed, and they both only modify mrt. Tested in Linux 3.4.8. Signed-off-by: Francesco Ruggeri <fruggeri@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit acbb219d5f53821b2d0080d047800410c0420ea1 ]

When tearing down a net namespace, ipv4 mr_table structures are freed
without first deactivating their timers. This can result in a crash in
run_timer_softirq.
This patch mimics the corresponding behaviour in ipv6.
Locking and synchronization seem to be adequate.
We are about to kfree mrt, so existing code should already make sure that
no other references to mrt are pending or can be created by incoming traffic.
The functions invoked here do not cause new references to mrt or other
race conditions to be created.
Invoking del_timer_sync guarantees that ipmr_expire_timer is inactive.
Both ipmr_expire_process (whose completion we may have to wait in
del_timer_sync) and mroute_clean_tables internally use mfc_unres_lock
or other synchronizations when needed, and they both only modify mrt.

Tested in Linux 3.4.8.

Signed-off-by: Francesco Ruggeri <fruggeri@aristanetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tcp: fix cwnd reduction for non-sack recovery 2012-10-02T17:38:55+00:00 Yuchung Cheng ycheng@google.com 2012-08-23T07:05:17+00:00 1d7b926e92f37be1a45ada2c3bdce9970a53cb93 [ Upstream commit 7c4a56fec379ac0d7754e0d4da6a7361f1a4fe64 ] The cwnd reduction in fast recovery is based on the number of packets newly delivered per ACK. For non-sack connections every DUPACK signifies a packet has been delivered, but the sender mistakenly skips counting them for cwnd reduction. The fix is to compute newly_acked_sacked after DUPACKs are accounted in sacked_out for non-sack connections. Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Nandita Dukkipati <nanditad@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 7c4a56fec379ac0d7754e0d4da6a7361f1a4fe64 ]

The cwnd reduction in fast recovery is based on the number of packets
newly delivered per ACK. For non-sack connections every DUPACK
signifies a packet has been delivered, but the sender mistakenly
skips counting them for cwnd reduction.

The fix is to compute newly_acked_sacked after DUPACKs are accounted
in sacked_out for non-sack connections.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Nandita Dukkipati <nanditad@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tcp: Apply device TSO segment limit earlier 2012-10-02T17:38:39+00:00 Ben Hutchings bhutchings@solarflare.com 2012-07-30T16:11:42+00:00 b541db6330465eae0032d46d7d67ca7e0e1047e2 [ Upstream commit 1485348d2424e1131ea42efc033cbd9366462b01 ] Cache the device gso_max_segs in sock::sk_gso_max_segs and use it to limit the size of TSO skbs. This avoids the need to fall back to software GSO for local TCP senders. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 1485348d2424e1131ea42efc033cbd9366462b01 ]

Cache the device gso_max_segs in sock::sk_gso_max_segs and use it to
limit the size of TSO skbs.  This avoids the need to fall back to
software GSO for local TCP senders.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tcp: perform DMA to userspace only if there is a task waiting for it 2012-08-09T15:23:14+00:00 Jiri Kosina jkosina@suse.cz 2012-07-27T10:38:50+00:00 b35581f9e750bce76d305f2fb2551d3ab9cddede [ Upstream commit 59ea33a68a9083ac98515e4861c00e71efdc49a1 ] Back in 2006, commit 1a2449a87b ("[I/OAT]: TCP recv offload to I/OAT") added support for receive offloading to IOAT dma engine if available. The code in tcp_rcv_established() tries to perform early DMA copy if applicable. It however does so without checking whether the userspace task is actually expecting the data in the buffer. This is not a problem under normal circumstances, but there is a corner case where this doesn't work -- and that's when MSG_TRUNC flag to recvmsg() is used. If the IOAT dma engine is not used, the code properly checks whether there is a valid ucopy.task and the socket is owned by userspace, but misses the check in the dmaengine case. This problem can be observed in real trivially -- for example 'tbench' is a good reproducer, as it makes a heavy use of MSG_TRUNC. On systems utilizing IOAT, you will soon find tbench waiting indefinitely in sk_wait_data(), as they have been already early-copied in tcp_rcv_established() using dma engine. This patch introduces the same check we are performing in the simple iovec copy case to the IOAT case as well. It fixes the indefinite recvmsg(MSG_TRUNC) hangs. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 59ea33a68a9083ac98515e4861c00e71efdc49a1 ]

Back in 2006, commit 1a2449a87b ("[I/OAT]: TCP recv offload to I/OAT")
added support for receive offloading to IOAT dma engine if available.

The code in tcp_rcv_established() tries to perform early DMA copy if
applicable. It however does so without checking whether the userspace
task is actually expecting the data in the buffer.

This is not a problem under normal circumstances, but there is a corner
case where this doesn't work -- and that's when MSG_TRUNC flag to
recvmsg() is used.

If the IOAT dma engine is not used, the code properly checks whether
there is a valid ucopy.task and the socket is owned by userspace, but
misses the check in the dmaengine case.

This problem can be observed in real trivially -- for example 'tbench' is a
good reproducer, as it makes a heavy use of MSG_TRUNC. On systems utilizing
IOAT, you will soon find tbench waiting indefinitely in sk_wait_data(), as they
have been already early-copied in tcp_rcv_established() using dma engine.

This patch introduces the same check we are performing in the simple
iovec copy case to the IOAT case as well. It fixes the indefinite
recvmsg(MSG_TRUNC) hangs.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tcp: Add TCP_USER_TIMEOUT negative value check 2012-08-09T15:23:13+00:00 Hangbin Liu liuhangbin@gmail.com 2012-07-26T22:52:21+00:00 ae8effff91107fec667a7240d25978fe994da30b [ Upstream commit 42493570100b91ef663c4c6f0c0fdab238f9d3c2 ] TCP_USER_TIMEOUT is a TCP level socket option that takes an unsigned int. But patch "tcp: Add TCP_USER_TIMEOUT socket option"(dca43c75) didn't check the negative values. If a user assign -1 to it, the socket will set successfully and wait for 4294967295 miliseconds. This patch add a negative value check to avoid this issue. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 42493570100b91ef663c4c6f0c0fdab238f9d3c2 ]

TCP_USER_TIMEOUT is a TCP level socket option that takes an unsigned int. But
patch "tcp: Add TCP_USER_TIMEOUT socket option"(dca43c75) didn't check the negative
values. If a user assign -1 to it, the socket will set successfully and wait
for 4294967295 miliseconds. This patch add a negative value check to avoid
this issue.

Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cipso: don't follow a NULL pointer when setsockopt() is called 2012-07-18T16:01:12+00:00 Paul Moore pmoore@redhat.com 2012-07-17T11:07:47+00:00 89d7ae34cdda4195809a5a987f697a517a2a3177 As reported by Alan Cox, and verified by Lin Ming, when a user attempts to add a CIPSO option to a socket using the CIPSO_V4_TAG_LOCAL tag the kernel dies a terrible death when it attempts to follow a NULL pointer (the skb argument to cipso_v4_validate() is NULL when called via the setsockopt() syscall). This patch fixes this by first checking to ensure that the skb is non-NULL before using it to find the incoming network interface. In the unlikely case where the skb is NULL and the user attempts to add a CIPSO option with the _TAG_LOCAL tag we return an error as this is not something we want to allow. A simple reproducer, kindly supplied by Lin Ming, although you must have the CIPSO DOI #3 configure on the system first or you will be caught early in cipso_v4_validate(): #include <sys/types.h> #include <sys/socket.h> #include <linux/ip.h> #include <linux/in.h> #include <string.h> struct local_tag { char type; char length; char info[4]; }; struct cipso { char type; char length; char doi[4]; struct local_tag local; }; int main(int argc, char **argv) { int sockfd; struct cipso cipso = { .type = IPOPT_CIPSO, .length = sizeof(struct cipso), .local = { .type = 128, .length = sizeof(struct local_tag), }, }; memset(cipso.doi, 0, 4); cipso.doi[3] = 3; sockfd = socket(AF_INET, SOCK_DGRAM, 0); #define SOL_IP 0 setsockopt(sockfd, SOL_IP, IP_OPTIONS, &cipso, sizeof(struct cipso)); return 0; } CC: Lin Ming <mlin@ss.pku.edu.cn> Reported-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Paul Moore <pmoore@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
As reported by Alan Cox, and verified by Lin Ming, when a user
attempts to add a CIPSO option to a socket using the CIPSO_V4_TAG_LOCAL
tag the kernel dies a terrible death when it attempts to follow a NULL
pointer (the skb argument to cipso_v4_validate() is NULL when called via
the setsockopt() syscall).

This patch fixes this by first checking to ensure that the skb is
non-NULL before using it to find the incoming network interface.  In
the unlikely case where the skb is NULL and the user attempts to add
a CIPSO option with the _TAG_LOCAL tag we return an error as this is
not something we want to allow.

A simple reproducer, kindly supplied by Lin Ming, although you must
have the CIPSO DOI #3 configure on the system first or you will be
caught early in cipso_v4_validate():

	#include <sys/types.h>
	#include <sys/socket.h>
	#include <linux/ip.h>
	#include <linux/in.h>
	#include <string.h>

	struct local_tag {
		char type;
		char length;
		char info[4];
	};

	struct cipso {
		char type;
		char length;
		char doi[4];
		struct local_tag local;
	};

	int main(int argc, char **argv)
	{
		int sockfd;
		struct cipso cipso = {
			.type = IPOPT_CIPSO,
			.length = sizeof(struct cipso),
			.local = {
				.type = 128,
				.length = sizeof(struct local_tag),
			},
		};

		memset(cipso.doi, 0, 4);
		cipso.doi[3] = 3;

		sockfd = socket(AF_INET, SOCK_DGRAM, 0);
		#define SOL_IP 0
		setsockopt(sockfd, SOL_IP, IP_OPTIONS,
			&cipso, sizeof(struct cipso));

		return 0;
	}

CC: Lin Ming <mlin@ss.pku.edu.cn>
Reported-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
snmp: fix OutOctets counter to include forwarded datagrams 2012-06-07T21:50:56+00:00 Vincent Bernat bernat@luffy.cx 2012-06-05T03:41:42+00:00 2d8dbb04c63e5369988f008bc4df3359c01d8812 RFC 4293 defines ipIfStatsOutOctets (similar definition for ipSystemStatsOutOctets): The total number of octets in IP datagrams delivered to the lower layers for transmission. Octets from datagrams counted in ipIfStatsOutTransmits MUST be counted here. And ipIfStatsOutTransmits: The total number of IP datagrams that this entity supplied to the lower layers for transmission. This includes datagrams generated locally and those forwarded by this entity. Therefore, IPSTATS_MIB_OUTOCTETS must be incremented when incrementing IPSTATS_MIB_OUTFORWDATAGRAMS. IP_UPD_PO_STATS is not used since ipIfStatsOutRequests must not include forwarded datagrams: The total number of IP datagrams that local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ipIfStatsOutForwDatagrams. Signed-off-by: Vincent Bernat <bernat@luffy.cx> Signed-off-by: David S. Miller <davem@davemloft.net> 
RFC 4293 defines ipIfStatsOutOctets (similar definition for
ipSystemStatsOutOctets):

   The total number of octets in IP datagrams delivered to the lower
   layers for transmission.  Octets from datagrams counted in
   ipIfStatsOutTransmits MUST be counted here.

And ipIfStatsOutTransmits:

   The total number of IP datagrams that this entity supplied to the
   lower layers for transmission.  This includes datagrams generated
   locally and those forwarded by this entity.

Therefore, IPSTATS_MIB_OUTOCTETS must be incremented when incrementing
IPSTATS_MIB_OUTFORWDATAGRAMS.

IP_UPD_PO_STATS is not used since ipIfStatsOutRequests must not
include forwarded datagrams:

   The total number of IP datagrams that local IP user-protocols
   (including ICMP) supplied to IP in requests for transmission.  Note
   that this counter does not include any datagrams counted in
   ipIfStatsOutForwDatagrams.

Signed-off-by: Vincent Bernat <bernat@luffy.cx>
Signed-off-by: David S. Miller <davem@davemloft.net>