linux-toradex.git/net/ipv6/anycast.c, branch v3.14.50

ipv6: restore the behavior of ipv6_sock_ac_drop()

2014-10-15T06:36:41+00:00

[ Upstream commit de185ab46cb02df9738b0d898b0c3a89181c5526 ]

It is possible that the interface is already gone after joining
the list of anycast on this interface as we don't hold a refcount
for the device, in this case we are safe to ignore the error.

What's more important, for API compatibility we should not
change this behavior for applications even if it were correct.

Fixes: commit a9ed4a2986e13011 ("ipv6: fix rtnl locking in setsockopt for anycast and multicast")
Cc: Sabrina Dubroca 
Cc: David S. Miller 
Signed-off-by: Cong Wang 
Acked-by: Hannes Frederic Sowa 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv6: fix rtnl locking in setsockopt for anycast and multicast

2014-10-15T06:36:41+00:00

[ Upstream commit a9ed4a2986e13011fcf4ed2d1a1647c53112f55b ]

Calling setsockopt with IPV6_JOIN_ANYCAST or IPV6_LEAVE_ANYCAST
triggers the assertion in addrconf_join_solict()/addrconf_leave_solict()

ipv6_sock_ac_join(), ipv6_sock_ac_drop(), ipv6_sock_ac_close() need to
take RTNL before calling ipv6_dev_ac_inc/dec. Same thing with
ipv6_sock_mc_join(), ipv6_sock_mc_drop(), ipv6_sock_mc_close() before
calling ipv6_dev_mc_inc/dec.

This patch moves ASSERT_RTNL() up a level in the call stack.

Signed-off-by: Cong Wang 
Signed-off-by: Sabrina Dubroca 
Reported-by: Tommi Rantala 
Acked-by: Hannes Frederic Sowa 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv6: enable anycast addresses as source addresses for datagrams

2014-01-23T05:57:05+00:00

This change allows to consider an anycast address valid as source address
when given via an IPV6_PKTINFO or IPV6_2292PKTINFO ancillary data item.
So, when sending a datagram with ancillary data, the unicast and anycast
addresses are handled in the same way.

- Adds ipv6_chk_acast_addr_src() to check if an anycast address is link-local
  on given interface or is global.
- Uses it in ip6_datagram_send_ctl().

Signed-off-by: Francois-Xavier Le Bail 
Acked-by: Hannes Frederic Sowa 
Signed-off-by: David S. Miller

net: proc: change proc_net_remove to remove_proc_entry

2013-02-18T19:53:08+00:00

proc_net_remove is only used to remove proc entries
that under /proc/net,it's not a general function for
removing proc entries of netns. if we want to remove
some proc entries which under /proc/net/stat/, we still
need to call remove_proc_entry.

this patch use remove_proc_entry to replace proc_net_remove.
we can remove proc_net_remove after this patch.

Signed-off-by: Gao feng 
Signed-off-by: David S. Miller

net: proc: change proc_net_fops_create to proc_create

2013-02-18T19:53:08+00:00

Right now, some modules such as bonding use proc_create
to create proc entries under /proc/net/, and other modules
such as ipv4 use proc_net_fops_create.

It looks a little chaos.this patch changes all of
proc_net_fops_create to proc_create. we can remove
proc_net_fops_create after this patch.

Signed-off-by: Gao feng 
Signed-off-by: David S. Miller

ipv6 anycast: Convert ipv6_sk_ac_lock to spinlock.

2013-01-31T03:41:13+00:00

Since all users are write-lock, it does not make sense to use
rwlock here.  Use simple spinlock.

Signed-off-by: YOSHIFUJI Hideaki 
Signed-off-by: David S. Miller

ipv6: avoid taking locks at socket dismantle

2012-12-05T21:01:28+00:00

ipv6_sock_mc_close() is called for ipv6 sockets at close time, and most
of them don't use multicast.

Add a test to avoid contention on a shared spinlock.

Same heuristic applies for ipv6_sock_ac_close(), to avoid contention
on a shared rwlock.

Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller

net: Allow userns root to control ipv6

2012-11-19T01:32:45+00:00

Allow an unpriviled user who has created a user namespace, and then
created a network namespace to effectively use the new network
namespace, by reducing capable(CAP_NET_ADMIN) and
capable(CAP_NET_RAW) calls to be ns_capable(net->user_ns,
CAP_NET_ADMIN), or capable(net->user_ns, CAP_NET_RAW) calls.

Settings that merely control a single network device are allowed.
Either the network device is a logical network device where
restrictions make no difference or the network device is hardware NIC
that has been explicity moved from the initial network namespace.

In general policy and network stack state changes are allowed while
resource control is left unchanged.

Allow the SIOCSIFADDR ioctl to add ipv6 addresses.
Allow the SIOCDIFADDR ioctl to delete ipv6 addresses.
Allow the SIOCADDRT ioctl to add ipv6 routes.
Allow the SIOCDELRT ioctl to delete ipv6 routes.

Allow creation of ipv6 raw sockets.

Allow setting the IPV6_JOIN_ANYCAST socket option.
Allow setting the IPV6_FL_A_RENEW parameter of the IPV6_FLOWLABEL_MGR
socket option.

Allow setting the IPV6_TRANSPARENT socket option.
Allow setting the IPV6_HOPOPTS socket option.
Allow setting the IPV6_RTHDRDSTOPTS socket option.
Allow setting the IPV6_DSTOPTS socket option.
Allow setting the IPV6_IPSEC_POLICY socket option.
Allow setting the IPV6_XFRM_POLICY socket option.

Allow sending packets with the IPV6_2292HOPOPTS control message.
Allow sending packets with the IPV6_2292DSTOPTS control message.
Allow sending packets with the IPV6_RTHDRDSTOPTS control message.

Allow setting the multicast routing socket options on non multicast
routing sockets.

Allow the SIOCADDTUNNEL, SIOCCHGTUNNEL, and SIOCDELTUNNEL ioctls for
setting up, changing and deleting tunnels over ipv6.

Allow the SIOCADDTUNNEL, SIOCCHGTUNNEL, SIOCDELTUNNEL ioctls for
setting up, changing and deleting ipv6 over ipv4 tunnels.

Allow the SIOCADDPRL, SIOCDELPRL, SIOCCHGPRL ioctls for adding,
deleting, and changing the potential router list for ISATAP tunnels.

Signed-off-by: "Eric W. Biederman" 
Signed-off-by: David S. Miller

ipv6: introduce ip6_rt_put()

2012-11-03T18:59:05+00:00

As suggested by Eric, we could introduce a helper function
for ipv6 too, to avoid checking if rt is NULL before
dst_release().

Cc: Eric Dumazet 
Cc: David S. Miller 
Signed-off-by: Cong Wang 
Signed-off-by: David S. Miller

ipv6: bool/const conversions phase2

2012-05-19T05:08:16+00:00

Mostly bool conversions, some inline removals and const additions.

Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller