linux-toradex.git/net/ipv6/icmp.c, branch v4.10

Replace with globally

2016-12-24T19:46:01+00:00

This was entirely automated, using the script by Al:

  PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*'
  sed -i -e "s!$PATT!#include !" \
        $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)

to do the replacement at the end of the merge window.

Requested-by: Al Viro 
Signed-off-by: Linus Torvalds

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2016-12-03T17:29:53+00:00

Couple conflicts resolved here:

1) In the MACB driver, a bug fix to properly initialize the
   RX tail pointer properly overlapped with some changes
   to support variable sized rings.

2) In XGBE we had a "CONFIG_PM" --> "CONFIG_PM_SLEEP" fix
   overlapping with a reorganization of the driver to support
   ACPI, OF, as well as PCI variants of the chip.

3) In 'net' we had several probe error path bug fixes to the
   stmmac driver, meanwhile a lot of this code was cleaned up
   and reorganized in 'net-next'.

4) The cls_flower classifier obtained a helper function in
   'net-next' called __fl_delete() and this overlapped with
   Daniel Borkamann's bug fix to use RCU for object destruction
   in 'net'.  It also overlapped with Jiri's change to guard
   the rhashtable_remove_fast() call with a check against
   tc_skip_sw().

5) In mlx4, a revert bug fix in 'net' overlapped with some
   unrelated changes in 'net-next'.

6) In geneve, a stale header pointer after pskb_expand_head()
   bug fix in 'net' overlapped with a large reorganization of
   the same code in 'net-next'.  Since the 'net-next' code no
   longer had the bug in question, there was nothing to do
   other than to simply take the 'net-next' hunks.

Signed-off-by: David S. Miller

net: handle no dst on skb in icmp6_send

2016-11-28T21:13:01+00:00

Andrey reported the following while fuzzing the kernel with syzkaller:

kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Modules linked in:
CPU: 0 PID: 3859 Comm: a.out Not tainted 4.9.0-rc6+ #429
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
task: ffff8800666d4200 task.stack: ffff880067348000
RIP: 0010:[]  []
icmp6_send+0x5fc/0x1e30 net/ipv6/icmp.c:451
RSP: 0018:ffff88006734f2c0  EFLAGS: 00010206
RAX: ffff8800666d4200 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: dffffc0000000000 RDI: 0000000000000018
RBP: ffff88006734f630 R08: ffff880064138418 R09: 0000000000000003
R10: dffffc0000000000 R11: 0000000000000005 R12: 0000000000000000
R13: ffffffff84e7e200 R14: ffff880064138484 R15: ffff8800641383c0
FS:  00007fb3887a07c0(0000) GS:ffff88006cc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000000 CR3: 000000006b040000 CR4: 00000000000006f0
Stack:
 ffff8800666d4200 ffff8800666d49f8 ffff8800666d4200 ffffffff84c02460
 ffff8800666d4a1a 1ffff1000ccdaa2f ffff88006734f498 0000000000000046
 ffff88006734f440 ffffffff832f4269 ffff880064ba7456 0000000000000000
Call Trace:
 [] icmpv6_param_prob+0x2c/0x40 net/ipv6/icmp.c:557
 [<     inline     >] ip6_tlvopt_unknown net/ipv6/exthdrs.c:88
 [] ip6_parse_tlv+0x555/0x670 net/ipv6/exthdrs.c:157
 [] ipv6_parse_hopopts+0x199/0x460 net/ipv6/exthdrs.c:663
 [] ipv6_rcv+0xfa3/0x1dc0 net/ipv6/ip6_input.c:191
 ...

icmp6_send / icmpv6_send is invoked for both rx and tx paths. In both
cases the dst->dev should be preferred for determining the L3 domain
if the dst has been set on the skb. Fallback to the skb->dev if it has
not. This covers the case reported here where icmp6_send is invoked on
Rx before the route lookup.

Fixes: 5d41ce29e ("net: icmp6_send should use dst dev to determine L3 domain")
Reported-by: Andrey Konovalov 
Signed-off-by: David Ahern 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2016-11-15T15:54:36+00:00

Several cases of bug fixes in 'net' overlapping other changes in
'net-next-.

Signed-off-by: David S. Miller

net: icmp6_send should use dst dev to determine L3 domain

2016-11-08T01:30:19+00:00

icmp6_send is called in response to some event. The skb may not have
the device set (skb->dev is NULL), but it is expected to have a dst set.
Update icmp6_send to use the dst on the skb to determine L3 domain.

Fixes: ca254490c8dfd ("net: Add VRF support to IPv6 stack")
Signed-off-by: David Ahern 
Signed-off-by: David S. Miller

net: inet: Support UID-based routing in IP protocols.

2016-11-04T18:45:23+00:00

- Use the UID in routing lookups made by protocol connect() and
  sendmsg() functions.
- Make sure that routing lookups triggered by incoming packets
  (e.g., Path MTU discovery) take the UID of the socket into
  account.
- For packets not associated with a userspace socket, (e.g., ping
  replies) use UID 0 inside the user namespace corresponding to
  the network namespace the socket belongs to. This allows
  all namespaces to apply routing and iptables rules to
  kernel-originated traffic in that namespaces by matching UID 0.
  This is better than using the UID of the kernel socket that is
  sending the traffic, because the UID of kernel sockets created
  at namespace creation time (e.g., the per-processor ICMP and
  TCP sockets) is the UID of the user that created the socket,
  which might not be mapped in the namespace.

Tested: compiles allnoconfig, allyesconfig, allmodconfig
Tested: https://android-review.googlesource.com/253302
Signed-off-by: Lorenzo Colitti 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2016-06-30T09:03:36+00:00

Several cases of overlapping changes, except the packet scheduler
conflicts which deal with the addition of the free list parameter
to qdisc_enqueue().

Signed-off-by: David S. Miller

ipv6: RFC 4884 partial support for SIT/GRE tunnels

2016-06-19T05:11:39+00:00

When receiving an ICMPv4 message containing extensions as
defined in RFC 4884, and translating it to ICMPv6 at SIT
or GRE tunnel, we need some extra manipulation in order
to properly forward the extensions.

This patch only takes care of Time Exceeded messages as they
are the ones that typically carry information from various
routers in a fabric during a traceroute session.

It also avoids complex skb logic if the data_len is not
a multiple of 8.

RFC states :

   The "original datagram" field MUST contain at least 128 octets.
   If the original datagram did not contain 128 octets, the
   "original datagram" field MUST be zero padded to 128 octets.

In practice routers use 128 bytes of original datagram, not more.

Initial translation was added in commit ca15a078bd90
("sit: generate icmpv6 error when receiving icmpv4 error")

Signed-off-by: Eric Dumazet 
Cc: Oussama Ghorbel 
Signed-off-by: David S. Miller

ipv6: translate ICMP_TIME_EXCEEDED to ICMPV6_TIME_EXCEED

2016-06-19T05:11:39+00:00

For better traceroute/mtr support for SIT and GRE tunnels,
we translate IPV4 ICMP ICMP_TIME_EXCEEDED to ICMPV6_TIME_EXCEED

We also have to translate the IPv4 source IP address of ICMP
message to IPv6 v4mapped.

Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller

ip6: move ipip6_err_gen_icmpv6_unreach()

2016-06-19T05:11:39+00:00

We want to use this helper from GRE as well, so this is
the time to move it in net/ipv6/icmp.c

Also add a @nhs parameter, since SIT and GRE have different
values for the header(s) to skip.

Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller