linux-toradex.git/net/ipv6/ip6_checksum.c, branch v4.6-rc5 Linux kernel for Apalis and Colibri modules ipv6: Pass proto to csum_ipv6_magic as __u8 instead of unsigned short 2016-03-14T03:55:13+00:00 Alexander Duyck aduyck@mirantis.com 2016-03-11T22:05:41+00:00 1e94082963747b551b129528714827f76a090e93 This patch updates csum_ipv6_magic so that it correctly recognizes that protocol is a unsigned 8 bit value. This will allow us to better understand what limitations may or may not be present in how we handle the data. For example there are a number of places that call htonl on the protocol value. This is likely not necessary and can be replaced with a multiplication by ntohl(1) which will be converted to a shift by the compiler. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
This patch updates csum_ipv6_magic so that it correctly recognizes that
protocol is a unsigned 8 bit value.

This will allow us to better understand what limitations may or may not be
present in how we handle the data.  For example there are a number of
places that call htonl on the protocol value.  This is likely not necessary
and can be replaced with a multiplication by ntohl(1) which will be
converted to a shift by the compiler.

Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: udp: always set up for CHECKSUM_PARTIAL offload 2016-02-12T10:52:15+00:00 Edward Cree ecree@solarflare.com 2016-02-11T20:49:40+00:00 d75f1306d9464d535007f05e5da0afcf9e3916d9 If the dst device doesn't support it, it'll get fixed up later anyway by validate_xmit_skb(). Also, this allows us to take advantage of LCO to avoid summing the payload multiple times. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
If the dst device doesn't support it, it'll get fixed up later anyway
 by validate_xmit_skb().  Also, this allows us to take advantage of LCO
 to avoid summing the payload multiple times.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: local checksum offload for encapsulation 2016-02-12T10:52:15+00:00 Edward Cree ecree@solarflare.com 2016-02-11T20:48:04+00:00 179bc67f69b6cb53ad68cfdec5a917c2a2248355 The arithmetic properties of the ones-complement checksum mean that a correctly checksummed inner packet, including its checksum, has a ones complement sum depending only on whatever value was used to initialise the checksum field before checksumming (in the case of TCP and UDP, this is the ones complement sum of the pseudo header, complemented). Consequently, if we are going to offload the inner checksum with CHECKSUM_PARTIAL, we can compute the outer checksum based only on the packed data not covered by the inner checksum, and the initial value of the inner checksum field. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
The arithmetic properties of the ones-complement checksum mean that a
 correctly checksummed inner packet, including its checksum, has a ones
 complement sum depending only on whatever value was used to initialise
 the checksum field before checksumming (in the case of TCP and UDP,
 this is the ones complement sum of the pseudo header, complemented).
Consequently, if we are going to offload the inner checksum with
 CHECKSUM_PARTIAL, we can compute the outer checksum based only on the
 packed data not covered by the inner checksum, and the initial value of
 the inner checksum field.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
udp: Generic functions to set checksum 2014-06-05T05:46:38+00:00 Tom Herbert therbert@google.com 2014-06-05T00:19:48+00:00 af5fcba7f38f3166392f4087ab734433c84f160b Added udp_set_csum and udp6_set_csum functions to set UDP checksums in packets. These are for simple UDP packets such as those that might be created in UDP tunnels. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Added udp_set_csum and udp6_set_csum functions to set UDP checksums
in packets. These are for simple UDP packets such as those that might
be created in UDP tunnels.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: Implmement RFC 6936 (zero RX csums for UDP/IPv6) 2014-05-05T19:26:30+00:00 Tom Herbert therbert@google.com 2014-05-02T23:29:58+00:00 4068579e1e098fa81d48db9ba4432ab664c58561 RFC 6936 relaxes the requirement of RFC 2460 that UDP/IPv6 packets which are received with a zero UDP checksum value must be dropped. RFC 6936 allows zero checksums to support tunnels over UDP. When sk_no_check is set we allow on a socket we allow a zero IPv6 UDP checksum. This is for both sending zero checksum and accepting a zero checksum on receive. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
RFC 6936 relaxes the requirement of RFC 2460 that UDP/IPv6 packets which
are received with a zero UDP checksum value must be dropped. RFC 6936
allows zero checksums to support tunnels over UDP.

When sk_no_check is set we allow on a socket we allow a zero IPv6
UDP checksum. This is for both sending zero checksum and accepting
a zero checksum on receive.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: Call skb_checksum_init in IPv6 2014-05-05T19:26:30+00:00 Tom Herbert therbert@google.com 2014-05-02T23:29:51+00:00 e4f45b7f40bdaade5ef8f45e7c6daed4c909fdf5 Call skb_checksum_init instead of private functions. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Call skb_checksum_init instead of private functions.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ipv6: log src and dst along with "udp checksum is 0" 2014-02-26T20:46:25+00:00 Bjørn Mork bjorn@mork.no 2014-02-25T20:11:02+00:00 84a3e72c3a5c2441be46c4afba95fe5af3c370e7 These info messages are rather pointless without any means to identify the source of the bogus packets. Logging the src and dst addresses and ports may help a bit. Cc: Joe Perches <joe@perches.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> 
These info messages are rather pointless without any means to identify
the source of the bogus packets.  Logging the src and dst addresses and
ports may help a bit.

Cc: Joe Perches <joe@perches.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
ipv6: move csum_ipv6_magic() and udp6_csum_init() into static library 2013-01-09T01:56:10+00:00 Cong Wang amwang@redhat.com 2013-01-07T20:52:40+00:00 acb3e04119fbf9145eb6d6bb707f6fb662ab4d3b As suggested by David, udp6_csum_init() is too big to be inlined, move it to ipv6 static library, net/ipv6/ip6_checksum.c. And the generic csum_ipv6_magic() too. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
As suggested by David, udp6_csum_init() is too big to be inlined,
move it to ipv6 static library, net/ipv6/ip6_checksum.c.

And the generic csum_ipv6_magic() too.

Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>