linux-toradex.git/net/ipv6/ip6_fib.c, branch v5.3.2 Linux kernel for Apalis and Colibri modules ipv6: Unlink sibling route in case of failure 2019-07-18T19:01:43+00:00 Ido Schimmel idosch@mellanox.com 2019-07-17T20:39:33+00:00 54851aa90cf27041d64b12f65ac72e9f97bd90fd When a route needs to be appended to an existing multipath route, fib6_add_rt2node() first appends it to the siblings list and increments the number of sibling routes on each sibling. Later, the function notifies the route via call_fib6_entry_notifiers(). In case the notification is vetoed, the route is not unlinked from the siblings list, which can result in a use-after-free. Fix this by unlinking the route from the siblings list before returning an error. Audited the rest of the call sites from which the FIB notification chain is called and could not find more problems. Fixes: 2233000cba40 ("net/ipv6: Move call_fib6_entry_notifiers up for route adds") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Alexander Petrovskiy <alexpe@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
When a route needs to be appended to an existing multipath route,
fib6_add_rt2node() first appends it to the siblings list and increments
the number of sibling routes on each sibling.

Later, the function notifies the route via call_fib6_entry_notifiers().
In case the notification is vetoed, the route is not unlinked from the
siblings list, which can result in a use-after-free.

Fix this by unlinking the route from the siblings list before returning
an error.

Audited the rest of the call sites from which the FIB notification chain
is called and could not find more problems.

Fixes: 2233000cba40 ("net/ipv6: Move call_fib6_entry_notifiers up for route adds")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Alexander Petrovskiy <alexpe@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ip6_fib: Don't discard nodes with valid routing information in fib6_locate_1() 2019-06-24T17:18:49+00:00 Stefano Brivio sbrivio@redhat.com 2019-06-21T15:45:28+00:00 40cb35d5dc04e7f89cbc7b1fc9b4b48d9f1e5343 When we perform an inexact match on FIB nodes via fib6_locate_1(), longer prefixes will be preferred to shorter ones. However, it might happen that a node, with higher fn_bit value than some other, has no valid routing information. In this case, we'll pick that node, but it will be discarded by the check on RTN_RTINFO in fib6_locate(), and we might miss nodes with valid routing information but with lower fn_bit value. This is apparent when a routing exception is created for a default route: # ip -6 route list fc00:1::/64 dev veth_A-R1 proto kernel metric 256 pref medium fc00:2::/64 dev veth_A-R2 proto kernel metric 256 pref medium fc00:4::1 via fc00:2::2 dev veth_A-R2 metric 1024 pref medium fe80::/64 dev veth_A-R1 proto kernel metric 256 pref medium fe80::/64 dev veth_A-R2 proto kernel metric 256 pref medium default via fc00:1::2 dev veth_A-R1 metric 1024 pref medium # ip -6 route list cache fc00:4::1 via fc00:2::2 dev veth_A-R2 metric 1024 expires 593sec mtu 1500 pref medium fc00:3::1 via fc00:1::2 dev veth_A-R1 metric 1024 expires 593sec mtu 1500 pref medium # ip -6 route flush cache # node for default route is discarded Failed to send flush request: No such process # ip -6 route list cache fc00:3::1 via fc00:1::2 dev veth_A-R1 metric 1024 expires 586sec mtu 1500 pref medium Check right away if the node has a RTN_RTINFO flag, before replacing the 'prev' pointer, that indicates the longest matching prefix found so far. Fixes: 38fbeeeeccdb ("ipv6: prepare fib6_locate() for exception table") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
When we perform an inexact match on FIB nodes via fib6_locate_1(), longer
prefixes will be preferred to shorter ones. However, it might happen that
a node, with higher fn_bit value than some other, has no valid routing
information.

In this case, we'll pick that node, but it will be discarded by the check
on RTN_RTINFO in fib6_locate(), and we might miss nodes with valid routing
information but with lower fn_bit value.

This is apparent when a routing exception is created for a default route:
 # ip -6 route list
 fc00:1::/64 dev veth_A-R1 proto kernel metric 256 pref medium
 fc00:2::/64 dev veth_A-R2 proto kernel metric 256 pref medium
 fc00:4::1 via fc00:2::2 dev veth_A-R2 metric 1024 pref medium
 fe80::/64 dev veth_A-R1 proto kernel metric 256 pref medium
 fe80::/64 dev veth_A-R2 proto kernel metric 256 pref medium
 default via fc00:1::2 dev veth_A-R1 metric 1024 pref medium
 # ip -6 route list cache
 fc00:4::1 via fc00:2::2 dev veth_A-R2 metric 1024 expires 593sec mtu 1500 pref medium
 fc00:3::1 via fc00:1::2 dev veth_A-R1 metric 1024 expires 593sec mtu 1500 pref medium
 # ip -6 route flush cache    # node for default route is discarded
 Failed to send flush request: No such process
 # ip -6 route list cache
 fc00:3::1 via fc00:1::2 dev veth_A-R1 metric 1024 expires 586sec mtu 1500 pref medium

Check right away if the node has a RTN_RTINFO flag, before replacing the
'prev' pointer, that indicates the longest matching prefix found so far.

Fixes: 38fbeeeeccdb ("ipv6: prepare fib6_locate() for exception table")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ipv6: Dump route exceptions if requested 2019-06-24T17:18:49+00:00 Stefano Brivio sbrivio@redhat.com 2019-06-21T15:45:27+00:00 1e47b4837f3bdaa425727cfe09f5ae3b6c4c41a9 Since commit 2b760fcf5cfb ("ipv6: hook up exception table to store dst cache"), route exceptions reside in a separate hash table, and won't be found by walking the FIB, so they won't be dumped to userspace on a RTM_GETROUTE message. This causes 'ip -6 route list cache' and 'ip -6 route flush cache' to have no function anymore: # ip -6 route get fc00:3::1 fc00:3::1 via fc00:1::2 dev veth_A-R1 src fc00:1::1 metric 1024 expires 539sec mtu 1400 pref medium # ip -6 route get fc00:4::1 fc00:4::1 via fc00:2::2 dev veth_A-R2 src fc00:2::1 metric 1024 expires 536sec mtu 1500 pref medium # ip -6 route list cache # ip -6 route flush cache # ip -6 route get fc00:3::1 fc00:3::1 via fc00:1::2 dev veth_A-R1 src fc00:1::1 metric 1024 expires 520sec mtu 1400 pref medium # ip -6 route get fc00:4::1 fc00:4::1 via fc00:2::2 dev veth_A-R2 src fc00:2::1 metric 1024 expires 519sec mtu 1500 pref medium because iproute2 lists cached routes using RTM_GETROUTE, and flushes them by listing all the routes, and deleting them with RTM_DELROUTE one by one. If cached routes are requested using the RTM_F_CLONED flag together with strict checking, or if no strict checking is requested (and hence we can't consistently apply filters), look up exceptions in the hash table associated with the current fib6_info in rt6_dump_route(), and, if present and not expired, add them to the dump. We might be unable to dump all the entries for a given node in a single message, so keep track of how many entries were handled for the current node in fib6_walker, and skip that amount in case we start from the same partially dumped node. When a partial dump restarts, as the starting node might change when 'sernum' changes, we have no guarantee that we need to skip the same amount of in-node entries. Therefore, we need two counters, and we need to zero the in-node counter if the node from which the dump is resumed differs. Note that, with the current version of iproute2, this only fixes the 'ip -6 route list cache': on a flush command, iproute2 doesn't pass RTM_F_CLONED and, due to this inconsistency, 'ip -6 route flush cache' is still unable to fetch the routes to be flushed. This will be addressed in a patch for iproute2. To flush cached routes, a procfs entry could be introduced instead: that's how it works for IPv4. We already have a rt6_flush_exception() function ready to be wired to it. However, this would not solve the issue for listing. Versions of iproute2 and kernel tested: iproute2 kernel 4.14.0 4.15.0 4.19.0 5.0.0 5.1.0 5.1.0, patched 3.18 list + + + + + + flush + + + + + + 4.4 list + + + + + + flush + + + + + + 4.9 list + + + + + + flush + + + + + + 4.14 list + + + + + + flush + + + + + + 4.15 list flush 4.19 list flush 5.0 list flush 5.1 list flush with list + + + + + + fix flush + + + + v7: - Explain usage of "skip" counters in commit message (suggested by David Ahern) v6: - Rebase onto net-next, use recently introduced nexthop walker - Make rt6_nh_dump_exceptions() a separate function (suggested by David Ahern) v5: - Use dump_routes and dump_exceptions from filter, ignore NLM_F_MATCH, update test results (flushing works with iproute2 < 5.0.0 now) v4: - Split NLM_F_MATCH and strict check handling in separate patches - Filter routes using RTM_F_CLONED: if it's not set, only return non-cached routes, and if it's set, only return cached routes: change requested by David Ahern and Martin Lau. This implies that iproute2 needs a separate patch to be able to flush IPv6 cached routes. This is not ideal because we can't fix the breakage caused by 2b760fcf5cfb entirely in kernel. However, two years have passed since then, and this makes it more tolerable v3: - More descriptive comment about expired exceptions in rt6_dump_route() - Swap return values of rt6_dump_route() (suggested by Martin Lau) - Don't zero skip_in_node in case we don't dump anything in a given pass (also suggested by Martin Lau) - Remove check on RTM_F_CLONED altogether: in the current UAPI semantic, it's just a flag to indicate the route was cloned, not to filter on routes v2: Add tracking of number of entries to be skipped in current node after a partial dump. As we restart from the same node, if not all the exceptions for a given node fit in a single message, the dump will not terminate, as suggested by Martin Lau. This is a concrete possibility, setting up a big number of exceptions for the same route actually causes the issue, suggested by David Ahern. Reported-by: Jianlin Shi <jishi@redhat.com> Fixes: 2b760fcf5cfb ("ipv6: hook up exception table to store dst cache") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Since commit 2b760fcf5cfb ("ipv6: hook up exception table to store dst
cache"), route exceptions reside in a separate hash table, and won't be
found by walking the FIB, so they won't be dumped to userspace on a
RTM_GETROUTE message.

This causes 'ip -6 route list cache' and 'ip -6 route flush cache' to
have no function anymore:

 # ip -6 route get fc00:3::1
 fc00:3::1 via fc00:1::2 dev veth_A-R1 src fc00:1::1 metric 1024 expires 539sec mtu 1400 pref medium
 # ip -6 route get fc00:4::1
 fc00:4::1 via fc00:2::2 dev veth_A-R2 src fc00:2::1 metric 1024 expires 536sec mtu 1500 pref medium
 # ip -6 route list cache
 # ip -6 route flush cache
 # ip -6 route get fc00:3::1
 fc00:3::1 via fc00:1::2 dev veth_A-R1 src fc00:1::1 metric 1024 expires 520sec mtu 1400 pref medium
 # ip -6 route get fc00:4::1
 fc00:4::1 via fc00:2::2 dev veth_A-R2 src fc00:2::1 metric 1024 expires 519sec mtu 1500 pref medium

because iproute2 lists cached routes using RTM_GETROUTE, and flushes them
by listing all the routes, and deleting them with RTM_DELROUTE one by one.

If cached routes are requested using the RTM_F_CLONED flag together with
strict checking, or if no strict checking is requested (and hence we can't
consistently apply filters), look up exceptions in the hash table
associated with the current fib6_info in rt6_dump_route(), and, if present
and not expired, add them to the dump.

We might be unable to dump all the entries for a given node in a single
message, so keep track of how many entries were handled for the current
node in fib6_walker, and skip that amount in case we start from the same
partially dumped node.

When a partial dump restarts, as the starting node might change when
'sernum' changes, we have no guarantee that we need to skip the same
amount of in-node entries. Therefore, we need two counters, and we need to
zero the in-node counter if the node from which the dump is resumed
differs.

Note that, with the current version of iproute2, this only fixes the
'ip -6 route list cache': on a flush command, iproute2 doesn't pass
RTM_F_CLONED and, due to this inconsistency, 'ip -6 route flush cache' is
still unable to fetch the routes to be flushed. This will be addressed in
a patch for iproute2.

To flush cached routes, a procfs entry could be introduced instead: that's
how it works for IPv4. We already have a rt6_flush_exception() function
ready to be wired to it. However, this would not solve the issue for
listing.

Versions of iproute2 and kernel tested:

                    iproute2
kernel             4.14.0   4.15.0   4.19.0   5.0.0   5.1.0    5.1.0, patched
 3.18    list        +        +        +        +       +            +
         flush       +        +        +        +       +            +
 4.4     list        +        +        +        +       +            +
         flush       +        +        +        +       +            +
 4.9     list        +        +        +        +       +            +
         flush       +        +        +        +       +            +
 4.14    list        +        +        +        +       +            +
         flush       +        +        +        +       +            +
 4.15    list
         flush
 4.19    list
         flush
 5.0     list
         flush
 5.1     list
         flush
 with    list        +        +        +        +       +            +
 fix     flush       +        +        +                             +

v7:
  - Explain usage of "skip" counters in commit message (suggested by
    David Ahern)

v6:
  - Rebase onto net-next, use recently introduced nexthop walker
  - Make rt6_nh_dump_exceptions() a separate function (suggested by David
    Ahern)

v5:
  - Use dump_routes and dump_exceptions from filter, ignore NLM_F_MATCH,
    update test results (flushing works with iproute2 < 5.0.0 now)

v4:
  - Split NLM_F_MATCH and strict check handling in separate patches
  - Filter routes using RTM_F_CLONED: if it's not set, only return
    non-cached routes, and if it's set, only return cached routes:
    change requested by David Ahern and Martin Lau. This implies that
    iproute2 needs a separate patch to be able to flush IPv6 cached
    routes. This is not ideal because we can't fix the breakage caused
    by 2b760fcf5cfb entirely in kernel. However, two years have passed
    since then, and this makes it more tolerable

v3:
  - More descriptive comment about expired exceptions in rt6_dump_route()
  - Swap return values of rt6_dump_route() (suggested by Martin Lau)
  - Don't zero skip_in_node in case we don't dump anything in a given pass
    (also suggested by Martin Lau)
  - Remove check on RTM_F_CLONED altogether: in the current UAPI semantic,
    it's just a flag to indicate the route was cloned, not to filter on
    routes

v2: Add tracking of number of entries to be skipped in current node after
    a partial dump. As we restart from the same node, if not all the
    exceptions for a given node fit in a single message, the dump will
    not terminate, as suggested by Martin Lau. This is a concrete
    possibility, setting up a big number of exceptions for the same route
    actually causes the issue, suggested by David Ahern.

Reported-by: Jianlin Shi <jishi@redhat.com>
Fixes: 2b760fcf5cfb ("ipv6: hook up exception table to store dst cache")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ipv6/route: Change return code of rt6_dump_route() for partial node dumps 2019-06-24T17:18:49+00:00 Stefano Brivio sbrivio@redhat.com 2019-06-21T15:45:26+00:00 bf9a8a061ddcd6a58b312466ea5da44ab54ce8cb In the next patch, we are going to add optional dump of exceptions to rt6_dump_route(). Change the return code of rt6_dump_route() to accomodate partial node dumps: we might dump multiple routes per node, and might be able to dump only a given number of them, so fib6_dump_node() will need to know how many routes have been dumped on partial dump, to restart the dump from the point where it was interrupted. Note that fib6_dump_node() is the only caller and already handles all non-negative return codes as success: those become -1 to signal that we're done with the node. If we fail, return 0, as we were unable to dump the single route in the node, but we're not done with it. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
In the next patch, we are going to add optional dump of exceptions to
rt6_dump_route().

Change the return code of rt6_dump_route() to accomodate partial node
dumps: we might dump multiple routes per node, and might be able to dump
only a given number of them, so fib6_dump_node() will need to know how
many routes have been dumped on partial dump, to restart the dump from the
point where it was interrupted.

Note that fib6_dump_node() is the only caller and already handles all
non-negative return codes as success: those become -1 to signal that we're
done with the node. If we fail, return 0, as we were unable to dump the
single route in the node, but we're not done with it.

Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Revert "net/ipv6: Bail early if user only wants cloned entries" 2019-06-24T17:18:49+00:00 Stefano Brivio sbrivio@redhat.com 2019-06-21T15:45:24+00:00 ef11209d421976fe0990b43dbf91e2d6918813d0 This reverts commit 08e814c9e8eb5a982cbd1e8f6bd255d97c51026f: as we are preparing to fix listing and dumping of IPv6 cached routes, we need to allow RTM_F_CLONED as a flag to match routes against while dumping them. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
This reverts commit 08e814c9e8eb5a982cbd1e8f6bd255d97c51026f: as we
are preparing to fix listing and dumping of IPv6 cached routes, we
need to allow RTM_F_CLONED as a flag to match routes against while
dumping them.

Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
fib_frontend, ip6_fib: Select routes or exceptions dump from RTM_F_CLONED 2019-06-24T17:18:48+00:00 Stefano Brivio sbrivio@redhat.com 2019-06-21T15:45:20+00:00 564c91f7e563256be835f31db97a60908702c9ec The following patches add back the ability to dump IPv4 and IPv6 exception routes, and we need to allow selection of regular routes or exceptions. Use RTM_F_CLONED as filter to decide whether to dump routes or exceptions: iproute2 passes it in dump requests (except for IPv6 cache flush requests, this will be fixed in iproute2) and this used to work as long as exceptions were stored directly in the FIB, for both IPv4 and IPv6. Caveat: if strict checking is not requested (that is, if the dump request doesn't go through ip_valid_fib_dump_req()), we can't filter on protocol, tables or route types. In this case, filtering on RTM_F_CLONED would be inconsistent: we would fix 'ip route list cache' by returning exception routes and at the same time introduce another bug in case another selector is present, e.g. on 'ip route list cache table main' we would return all exception routes, without filtering on tables. Keep this consistent by applying no filters at all, and dumping both routes and exceptions, if strict checking is not requested. iproute2 currently filters results anyway, and no unwanted results will be presented to the user. The kernel will just dump more data than needed. v7: No changes v6: Rebase onto net-next, no changes v5: New patch: add dump_routes and dump_exceptions flags in filter and simply clear the unwanted one if strict checking is enabled, don't ignore NLM_F_MATCH and don't set filter_set if NLM_F_MATCH is set. Skip filtering altogether if no strict checking is requested: selecting routes or exceptions only would be inconsistent with the fact we can't filter on tables. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
The following patches add back the ability to dump IPv4 and IPv6 exception
routes, and we need to allow selection of regular routes or exceptions.

Use RTM_F_CLONED as filter to decide whether to dump routes or exceptions:
iproute2 passes it in dump requests (except for IPv6 cache flush requests,
this will be fixed in iproute2) and this used to work as long as
exceptions were stored directly in the FIB, for both IPv4 and IPv6.

Caveat: if strict checking is not requested (that is, if the dump request
doesn't go through ip_valid_fib_dump_req()), we can't filter on protocol,
tables or route types.

In this case, filtering on RTM_F_CLONED would be inconsistent: we would
fix 'ip route list cache' by returning exception routes and at the same
time introduce another bug in case another selector is present, e.g. on
'ip route list cache table main' we would return all exception routes,
without filtering on tables.

Keep this consistent by applying no filters at all, and dumping both
routes and exceptions, if strict checking is not requested. iproute2
currently filters results anyway, and no unwanted results will be
presented to the user. The kernel will just dump more data than needed.

v7: No changes

v6: Rebase onto net-next, no changes

v5: New patch: add dump_routes and dump_exceptions flags in filter and
    simply clear the unwanted one if strict checking is enabled, don't
    ignore NLM_F_MATCH and don't set filter_set if NLM_F_MATCH is set.
    Skip filtering altogether if no strict checking is requested:
    selecting routes or exceptions only would be inconsistent with the
    fact we can't filter on tables.

Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ipv6: honor RT6_LOOKUP_F_DST_NOREF in rule lookup logic 2019-06-23T20:24:17+00:00 Wei Wang weiwan@google.com 2019-06-21T00:36:39+00:00 d64a1f574a2957b4bcb06452d36cc1c6bf16e9fc This patch specifically converts the rule lookup logic to honor this flag and not release refcnt when traversing each rule and calling lookup() on each routing table. Similar to previous patch, we also need some special handling of dst entries in uncached list because there is always 1 refcnt taken for them even if RT6_LOOKUP_F_DST_NOREF flag is set. Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
This patch specifically converts the rule lookup logic to honor this
flag and not release refcnt when traversing each rule and calling
lookup() on each routing table.
Similar to previous patch, we also need some special handling of dst
entries in uncached list because there is always 1 refcnt taken for them
even if RT6_LOOKUP_F_DST_NOREF flag is set.

Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ipv6: Stop sending in-kernel notifications for each nexthop 2019-06-18T16:45:37+00:00 Ido Schimmel idosch@mellanox.com 2019-06-18T15:12:57+00:00 d5382fef70ce273608d6fc652c24f075de3737ef Both listeners - mlxsw and netdevsim - of IPv6 FIB notifications are now ready to handle IPv6 multipath notifications. Therefore, stop ignoring such notifications in both drivers and stop sending notification for each added / deleted nexthop. v2: * Remove 'multipath_rt' from 'struct fib6_entry_notifier_info' Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Both listeners - mlxsw and netdevsim - of IPv6 FIB notifications are now
ready to handle IPv6 multipath notifications.

Therefore, stop ignoring such notifications in both drivers and stop
sending notification for each added / deleted nexthop.

v2:
* Remove 'multipath_rt' from 'struct fib6_entry_notifier_info'

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ipv6: Extend notifier info for multipath routes 2019-06-18T16:45:36+00:00 Ido Schimmel idosch@mellanox.com 2019-06-18T15:12:45+00:00 d4b96c7b51e8fe9bcf94c8ab8cd5717d2f005b04 Extend the IPv6 FIB notifier info with number of sibling routes being notified. This will later allow listeners to process one notification for a multipath routes instead of N, where N is the number of nexthops. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Extend the IPv6 FIB notifier info with number of sibling routes being
notified.

This will later allow listeners to process one notification for a
multipath routes instead of N, where N is the number of nexthops.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ipv6: Handle all fib6_nh in a nexthop in fib6_drop_pcpu_from 2019-06-10T17:44:56+00:00 David Ahern dsahern@gmail.com 2019-06-08T21:53:23+00:00 2ab75bfb17e2cf3159033e91ebf2eb11efc1f0d3 Use nexthop_for_each_fib6_nh to walk all fib6_nh in a nexthop when dropping 'from' reference in pcpu routes. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Use nexthop_for_each_fib6_nh to walk all fib6_nh in a nexthop when
dropping 'from' reference in pcpu routes.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>